where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

605 views
Technical Discussions
gowrishankarwuriti
R & D, scientist
ISRO, India, Joined Nov 2008, 34

gowrishankarwuriti

R & D, scientist
ISRO,
India,
Joined Nov 2008
34
05:14 Nov-11-2008
X-RAY

sir,
How X-Ray exposure parameters can be freezed if two dissimilar materials (say Copper and Inconel )joined together with ebw other than trial and error basis ?


    
 
 
S.V.Swamy
Engineering, - Material Testing Inspection & Quality Control
Retired from Nuclear Fuel Complex , India, Joined Feb 2001, 787

S.V.Swamy

Engineering, - Material Testing Inspection & Quality Control
Retired from Nuclear Fuel Complex ,
India,
Joined Feb 2001
787
07:21 Nov-11-2008
Re: X-RAY
Theoretically, you can calculate the equivalent thickness of each (in terms of steel) and then set the parameters for that thickness of steel. With a method called bracketing (a little higher and a little under exposure around the theoretical value), you should hit the correct exposure parameter in just a couple of trials.

Swamy
NDT Guru

----------- Start Original Message -----------
: sir,
: How X-Ray exposure parameters can be freezed if two dissimilar materials (say Copper and Inconel )joined together with ebw other than trial and error basis ?
------------ End Original Message ------------




    
 
 

Product Spotlight

Ultrasonic tomograph for imaging of concrete structures А1040 MIRA

Applicable for concrete inspection allowing imaging of the internal structure of objects from conc
...
rete, reinforced concrete, different stones. The operation applies pulse-echo technique at one-side access to the object. The instrument is feasible for concrete inspection for searching conduct ducts, conduits, detection of foreign inclusions, holes, honeycombing, cracks and other concrete defects.
>

I&T Nardoni

NDT, RESEARCH AND DEVELOPMENT OF NEW METHODOLOGY, TRAINING CENTER I&T NARDON INSTITUTE was idiated
...
in 1988 by Giuseppe Nardoni, now president and owner of the company, based on his multi-annual and international experience in the field of NDT.
>

NEOS III

NEOS III is Logos Imagings lightest DR system. With a built-in battery and internal wireless commu
...
nication, the NEOS III is perfect for users that want to quickly assess an item.
>

Semi-Automated Phased Array Immersion System for Small Composite Parts

Turn-key semi-automated system as an improved and affordable solution for inspection of small comp
...
osite parts. Includes support table, immersion tank, scanner, PA instrument, PC, Analysis software, database, wedge management and other options.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window