where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

3151 views
Technical Discussions
Pengzhu Wang
Pengzhu Wang
06:51 Nov-14-2008
Maximum penetration of Ir-192 in steel

Hi,
We are using Ir-192 to examine the casting quality of a steel part with maximum thickness 95.25mm:
(1) Is Ir-192 OK for this application?
(2) Does the decay influence the maximum penetration thickness?
Many thanks,
Pengzhu



 
 Reply 
 
tj
tj
07:11 Nov-14-2008
Re: Maximum penetration of Ir-192 in steel
----------- Start Original Message -----------
: Hi,
: We are using Ir-192 to examine the casting quality of a steel part with maximum thickness 95.25mm:
: (1) Is Ir-192 OK for this application?
: (2) Does the decay influence the maximum penetration thickness?
: Many thanks,
: Pengzhu
------------ End Original Message ------------

This would be working at the upper practical limit of Ir192. The energy levels would remain the same with decay. However, with loss of activity comes increased shot time and at 3in. of steel it would be impractical for normal use. Better to use higher energy x-ray or cobalt60 gamma.


 
 Reply 
 
Juan Amado
Engineering, Inspection
Arco Industrial, S.A., Panama, Joined Nov 2001, 44

Juan Amado

Engineering, Inspection
Arco Industrial, S.A.,
Panama,
Joined Nov 2001
44
09:53 Nov-14-2008
Re: Maximum penetration of Ir-192 in steel
----------- Start Original Message -----------
: : Hi,
: : We are using Ir-192 to examine the casting quality of a steel part with maximum thickness 95.25mm:
: : (1) Is Ir-192 OK for this application?
: : (2) Does the decay influence the maximum penetration thickness?
: : Many thanks,
: : Pengzhu
: This would be working at the upper practical limit of Ir192. The energy levels would remain the same with decay. However, with loss of activity comes increased shot time and at 3in. of steel it would be impractical for normal use. Better to use higher energy x-ray or cobalt60 gamma.
------------ End Original Message ------------


If 95mm is the maximum thickness, but you have thinner sections, you could probably gain valuable information about the part using Ir192, however, if you are looking to get a good density reading at the thickest portion of the casting you probably will not get it with this source.
Hope this helps, regards,
Juan Amado



 
 Reply 
 
Peter Alfers
Peter Alfers
09:53 Nov-16-2008
Re: Maximum penetration of Ir-192 in steel
you can use Ir 192 in conjunction with two Films how will
exposure at once. Than you need the half time for your right density .For the interpretation use the films lying upon each other.


 
 Reply 
 

Product Spotlight

Compact NDT inspection-heads for measurements with active thermography

The compact inspection head is suitable for thermographic ndt tasks. The uncooled infrared camera
...
is specially developed for NDI-tasks and offers a thermal sensitivity until now known only from thermal imagers with cooled detector. All required components and functions are integrated into the inspection-head. You will only need an ethernet cable to connect the sensor with the evaluation system.
>

NDTkit RT

NDTkit RT, TESTIA's Digital Radiography software The NDTkit product line software for X-ray analysi
...
s. NDTkit RT is a software benefiting from the Ultis kernel which is dedicated to radiographic image analysis. It offers a set of tools and filtering processes to assist RT operators in finding relevant flaws.
>

HARDNESS TESTER TKM-459CE combi

TKM-459CE combi applies 2 methods of hardness control: UCI and Leeb. It provides high-accuracy tes
...
ting of metals and alloys as well as items of different sizes and configurations, their hardened layers and galvanic coatings. Device represents results in HB, HRC, HV and others. Shock-, dust- and water-proof housing with intuitive software make this gauge easy to use in all working conditions.
>

Wireless TOFD scanner

Quick, accurate and highly reproducible welds testing. The System operates wirelessly and is compat
...
ible with any type of Windows based Laptop, Desktop or Tablet.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window