where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

798 views
Technical Discussions
LANRE ALAPINI
NDT Inspector,
NDT TRAINING AND TESTING CENTRE HOUSTON TEXAS USA, Nigeria, Joined Nov 2008, 3

LANRE ALAPINI

NDT Inspector,
NDT TRAINING AND TESTING CENTRE HOUSTON TEXAS USA,
Nigeria,
Joined Nov 2008
3
06:27 Dec-09-2008
flaw checking

can any body explain the term lack of back wall reflection


 
 Reply 
 
James Boaden
Sales,
Midas NDT Systems Ltd., United Kingdom, Joined Jun 2002, 6

James Boaden

Sales,
Midas NDT Systems Ltd.,
United Kingdom,
Joined Jun 2002
6
07:00 Dec-09-2008
Re: flaw checking
----------- Start Original Message -----------
: can any body explain the term lack of back wall reflection
------------ End Original Message ------------

Using ultrasonics, a signal is generated that reflects back from the back surface of a component (when generated outside the component some sound reflects off the front surface and some penetrates, this then reflects off the back surface).

You should always get reflections from the back surface unless something stops the sound reaching it. Lack of back wall reflection dictates that a defect has stopped the sound reaching the back surface and the area of lack of back surface will be the same as the planar area of the defect.


 
 Reply 
 
S.V.Swamy
Engineering, - Material Testing Inspection & Quality Control
Retired from Nuclear Fuel Complex , India, Joined Feb 2001, 787

S.V.Swamy

Engineering, - Material Testing Inspection & Quality Control
Retired from Nuclear Fuel Complex ,
India,
Joined Feb 2001
787
07:36 Dec-09-2008
Re: flaw checking
----------- Start Original Message -----------
: can any body explain the term lack of back wall reflection
------------ End Original Message ------------

Lack of back wall reflection or echo means that the transducer is not receiving the ultrasound signal reflected from the back surface (opposite side of the test object). This can happen due to one or more of the following reasons:

It is assumed that the instrument and the probe are working and that the range has been calibrated properly.

Very rough surface resulting in poor coupling

Highly curved surface resulting in sound not entering the test object

Lack of parallelism between the test surface and the back surface, for example a wedge

Sintered material with lot of porosity.

We had some interesting experiences while testing hot rolled austenitic stainless steel plates and tungsten-copper blocks. If any one is interested, I will share. Or I may submit a short case study like paper.

Swamy
NDT Guru





 
 Reply 
 

Product Spotlight

Ultrasonic Testing Immersion Tanks with Unmatched Scanning Features

TecScan’s non-destructive testing Ultrasonic Immersion Tanks & scanners are designed for high pe
...
rformance and demanding NDT testing applications. Our Scan3D™ line of High Precision Immersion Tanks are specifically designed for automated ultrasonic testing of complex composites parts used in aerospace and industrial applications.
>

Sci Aps Z-Series Portable Handheld Analysers

The world’s only handheld analyzer that measures carbon content in stainless (yes even L-grades),s
...
teels, and cast irons. Also accepted for low Si analysis for sulfidic corrosion analysis, and is widely used in the power industry for Cr analysis, for flow accelerated corrosion applications.
>

VOGT Ultrasonics awarded innovation champion

Let go of the old and try something new. VOGT convinced the jury in the 27th round of the TOP 100
...
innovation competition. Our team is very pleased to officially belong to the TOP 100 in Germany!
>

HARDNESS TESTER TKM-459CE combi

TKM-459CE combi applies 2 methods of hardness control: UCI and Leeb. It provides high-accuracy tes
...
ting of metals and alloys as well as items of different sizes and configurations, their hardened layers and galvanic coatings. Device represents results in HB, HRC, HV and others. Shock-, dust- and water-proof housing with intuitive software make this gauge easy to use in all working conditions.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window