where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
472 views
Technical Discussions
Jayesh Vanza
Consultant
m/s Al-Hoty Stanger Ltd. Co., Saudi Arabia, Joined Jul 2001, 2

Jayesh Vanza

Consultant
m/s Al-Hoty Stanger Ltd. Co.,
Saudi Arabia,
Joined Jul 2001
2
08:15 Dec-10-2008
Coating Inspection of buried pipeline

Dear friends,

Myself Jayesh working as Inspection engineer with TPI and we have a enquiry regarding inspection of underground buried pipeline.

My Client are in process of exploring some NDT technique/Coating inspection technique which can be utilized for underground pipelines.They have crude line 42" dia which runs underground for more than 10 to 15km which is externally coated by wrapping coating. Also sea water lines which is both internally and externally coated.

Can you please suggest me how to proceed with inspection and what NDT techniques to be implimented.

Regards
Jayesh Vanza



 
 Reply 
 
Martyn
Martyn
06:05 Dec-17-2008
Re: Coating Inspection of buried pipeline
Check out the new EMAT ILI tools that are available. They are showing a lot of promise in assessing the coating condition, especially the older Coal Tar / Bitumen wrap type coatings.


----------- Start Original Message -----------

: Dear friends,
:
: Myself Jayesh working as Inspection engineer with TPI and we have a enquiry regarding inspection of underground buried pipeline.
:
: My Client are in process of exploring some NDT technique/Coating inspection technique which can be utilized for underground pipelines.They have crude line 42" dia which runs underground for more than 10 to 15km which is externally coated by wrapping coating. Also sea water lines which is both internally and externally coated.
:
: Can you please suggest me how to proceed with inspection and what NDT techniques to be implimented.
:
: Regards
: Jayesh Vanza
------------ End Original Message ------------




 
 Reply 
 

Product Spotlight

NEW! The PragmaPro Instrument Platform

The PragmaPro is based on a modular cartridge technology and supports various NDT instrument modal
...
ities such as UT, PAUT, ECT and many more. This new platform is based on a machined, powder-coated aluminum frame for shock-proofness, best sealing qualities and maximum heat dissipation. This is practical to extend the outdoor temperature range and/or to extend the power injected in the transducers. The PragmaPro is aiming at a very wide range of applications, such as weld scanning, corrosion mapping and composite testing.
>

Aerospace Systems - Automated Ultrasonic Inspection

USL are specialists in the design and manufacture of turnkey ultrasonic inspection systems for aer
...
ospace applications. From monolithic composites to complex honeycomb structures. This video shows just a few examples of what is possible, find out more at: www.ultrasonic-sciences.co.uk
>

IntraPhase Athena Phased Array System

The Athena Phased Array system, manufactured by WesDyne NDE Products & Technology, consists of a pha
...
sed array acquisition system and PC running IntraSpect software. A PC is used to perform acquisition, analysis and storage of the data. System hardware is capable of operating up to four data sets with any combination of phased array or conventional UT probes. NOW AVAILABLE IN 64-64 CONFIGURATION.
>

HARDNESS TESTER TKM-459CE combi

TKM-459CE combi applies 2 methods of hardness control: UCI and Leeb. It provides high-accuracy tes
...
ting of metals and alloys as well as items of different sizes and configurations, their hardened layers and galvanic coatings. Device represents results in HB, HRC, HV and others. Shock-, dust- and water-proof housing with intuitive software make this gauge easy to use in all working conditions.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window