where expertise comes together - since 1996 -

# The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

 Modsonic Instruments Mfg Co Pvt LtdWe are leading Indian manufacturer and exporter of portable “Ultrasonic Testing Equipment” offering comprehensive range of Ultrasonic Fla ...
 2610 views
Technical Discussions
Ed Ginzel
R & D, -
Materials Research Institute, Canada, Joined Nov 1998, 1300

Ed Ginzel

R & D, -
Materials Research Institute,
Joined Nov 1998
1300
05:59 Dec-15-2008
k factor

I have been asked how the values for "k" used in the beam divergence equations have been derived. My favourite references of Krautkramer and Ermolov touch on the subject and allude to the use of the Bessel J1(x) function. However, I cannot find the link to the k values for dB drop using this function described in either text.
Does anyone have a more complete formulation of the equations to derive k?

James Barshinger
Engineering
General Electric Global Research Center, USA, Joined Aug 2000, 8

James Barshinger

Engineering
General Electric Global Research Center,
USA,
Joined Aug 2000
8
03:02 Dec-15-2008
Re: k factor
Ed,

To derive the values for "k" in the beam divergence equation for circular oscillators, 1st start with the equation:

R(g)=2*J1(x)/x where x=pi*D/l*sin(g)

- These equations are in krautramer though I have used g instead of "gamma" and l instead of "lambda"

To find a "k" for a certain dB drop, you start with the J1(x)/x term, equating that to the desired amplitude reduction. For example: J1(x)/x=.5 for a 6dB drop of the "free field", or for the "echo field", (J1(x)/x)^2=.5. You need to then use a numerical solver to obtain the x that satisfies the equation for the particular dB drop you are interested in.

Now, using the second equation, x=pi*D/l*sin(g). You can rewrite this equation as: sin(g)=(x/pi)*(l/D). "k" is simply the quantity (x/pi), thus you get the equation in the Krautkramer book.

For rectangular oscillators, the process is the same with the exception of using Sin(x)/x instead of J1(x)/x

-Jim

----------- Start Original Message -----------
: I have been asked how the values for "k" used in the beam divergence equations have been derived. My favourite references of Krautkramer and Ermolov touch on the subject and allude to the use of the Bessel J1(x) function. However, I cannot find the link to the k values for dB drop using this function described in either text.
: Does anyone have a more complete formulation of the equations to derive k?
------------ End Original Message ------------

Neil Burleigh
Sales
Krautkramer Australia Pty Ltd, Australia, Joined Dec 2002, 159

Neil Burleigh

Sales
Krautkramer Australia Pty Ltd,
Australia,
Joined Dec 2002
159
03:49 Dec-15-2008
Re: k factor
----------- Start Original Message -----------
: Ed,
: To derive the values for "k" in the beam divergence equation for circular oscillators, 1st start with the equation:
: R(g)=2*J1(x)/x where x=pi*D/l*sin(g)
: - These equations are in krautramer though I have used g instead of "gamma" and l instead of "lambda"
: To find a "k" for a certain dB drop, you start with the J1(x)/x term, equating that to the desired amplitude reduction. For example: J1(x)/x=.5 for a 6dB drop of the "free field", or for the "echo field", (J1(x)/x)^2=.5. You need to then use a numerical solver to obtain the x that satisfies the equation for the particular dB drop you are interested in.
: Now, using the second equation, x=pi*D/l*sin(g). You can rewrite this equation as: sin(g)=(x/pi)*(l/D). "k" is simply the quantity (x/pi), thus you get the equation in the Krautkramer book.
: For rectangular oscillators, the process is the same with the exception of using Sin(x)/x instead of J1(x)/x
: -Jim
: : I have been asked how the values for "k" used in the beam divergence equations have been derived. My favourite references of Krautkramer and Ermolov touch on the subject and allude to the use of the Bessel J1(x) function. However, I cannot find the link to the k values for dB drop using this function described in either text.
: : Does anyone have a more complete formulation of the equations to derive k?
------------ End Original Message ------------

Morning Ed,
Some years ago I had a similar situation, we were using a K factor of 1.08 for the 20dB edge and the theoretical determination of the beam was always larger than the practical determination. The 2 K factors we were told to use (from the training and examination boards) were 1.22 for the infinite edge and 1.08 for the 20 dB edge.
In the little pocket book, the "Krautkramer Blue Book",
listed K factor for the 20dB edge for rectangular crystals as 0.87. When we used this constant the practical and the theoretical determination of the edge of the beam were very similar. I asked the author of the "Blue Book" Udo Schlengermann and he explained that originally that these constants came from astronomy and light transmission from celestial bodies. Which meant that the K factor of 1.08 is for through transmission whereas the K factor of 0.87 is for pulse echo.
Hope this helps in the history.

Regards
Neil Burleigh

Udo Schlengermann
Consultant, -
Standards Consulting, Germany, Joined Nov 1998, 182

Udo Schlengermann

Consultant, -
Standards Consulting,
Germany,
Joined Nov 1998
182
02:06 Dec-16-2008
Re: k factor

Hello Ed, Jim and Neil,
the explanations for the derivation of the k factor of sound beam divergence are correct.
The pulse-echo technique has to take into account the characteristics of both the transmitting and the receiving transducer.
With equal transducers and with the logarithmic decibel-notation it simply means half the dB-drop as for free radiation.
For circular sources Bessels function J1(x)/x has to be used.
For rectangular sources it is the function sin(x)/x for one direction and sin(y)/y for the perpendicular direction.

Unfortunately neither Krautkramer's blue pocket book nor Krautkramer's red book on ultrasonic materials testing are available anymore.

As everything has been said by my former collegues, I take the chance to wish everyboby
a Merry Christmas and a Prosperous New Year.

Best regards
Udo Schlengermann
Chairman ISO/TC135/SC3 (UT)
Chairman CEN/TC138/WG2 (UT)

----------- Start Original Message -----------
: : Ed,
: : To derive thevalues for "k" in the beam divergence equation for circular oscillators, 1st start with the equation:
: : R(g)=2*J1(x)/x where x=pi*D/l*sin(g)
: : - These equations are in krautramer though I have used g instead of "gamma" and l instead of "lambda"
: : To find a "k" for a certain dB drop, you start with the J1(x)/x term, equating that to the desired amplitude reduction. For example: J1(x)/x=.5 for a 6dB drop of the "free field", or for the "echo field", (J1(x)/x)^2=.5. You need to then use a numerical solver to obtain the x that satisfies the equation for the particular dB drop you are interested in.
: : Now, using the second equation, x=pi*D/l*sin(g). You can rewrite this equation as: sin(g)=(x/pi)*(l/D). "k" is simply the quantity (x/pi), thus you get the equation in the Krautkramer book.
: : For rectangular oscillators, the process is the same with the exception of using Sin(x)/x instead of J1(x)/x
: : -Jim
: : : I have been asked how the values for "k" used in the beam divergence equations have been derived. My favourite references of Krautkramer and Ermolov touch on the subject and allude to the use of the Bessel J1(x) function. However, I cannot find the link to the k values for dB drop using this function described in either text.
: : : Does anyone have a more complete formulation of the equations to derive k?
: Morning Ed,
: Some years ago I had a similar situation, we were using a K factor of 1.08 for the 20dB edge and the theoretical determination of the beam was always larger than the practical determination. The 2 K factors we were told to use (from the training and examination boards) were 1.22 for the infinite edge and 1.08 for the 20 dB edge.
: In the little pocket book, the "Krautkramer Blue Book",
: listed K factor for the 20dB edge for rectangular crystals as 0.87. When we used this constant the practical and the theoretical determination of the edge of the beam were very similar. I asked the author of the "Blue Book" Udo Schlengermann and he explained that originally that these constants came from astronomy and light transmission from celestial bodies. Which meant that the K factor of 1.08 is for through transmission whereas the K factor of 0.87 is for pulse echo.
: Hope this helps in the history.
: Regards
: Neil Burleigh
------------ End Original Message ------------

Joe Buckley
Consultant, ASNT L-III, Honorary Secretary of BINDT
Level X NDT, BINDT, United Kingdom, Joined Oct 1999, 528

Joe Buckley

Consultant, ASNT L-III, Honorary Secretary of BINDT
Level X NDT, BINDT,
United Kingdom,
Joined Oct 1999
528
00:29 Dec-16-2008
Re: KK factor
Udo,

If GE are no longer circulating the Blue book, do you thuink there is any possibility of getting it uploaded to the internet?

I have to say that it would be in my top 5 of 'most useful NDT documents' and I would be really upset if I ever lost mine.

Joe

----------- Start Original Message -----------
: Hello Ed, Jim and Neil,
: the explanations for the derivation of the k factor of sound beam divergence are correct.
: The pulse-echo technique has to take into account the characteristics of both the transmitting and the receiving transducer.
: With equal transducers and with the logarithmic decibel-notation it simply means half the dB-drop as for free radiation.
: For circular sources Bessels function J1(x)/x has to be used.
: For rectangular sources it is the function sin(x)/x for one direction and sin(y)/y for the perpendicular direction.
: Unfortunately neither Krautkramer's blue pocket book nor Krautkramer's red book on ultrasonic materials testing are available anymore.
: As everything has been said by my former collegues, I take the chance to wish everyboby
: a Merry Christmas and a Prosperous New Year.
: Best regards
: Udo Schlengermann
: Chairman ISO/TC135/SC3 (UT)
: Chairman CEN/TC138/WG2 (UT)
:
: : : Ed,
: : : To derive the values for "k" in the beam divergence equation for circular oscillators, 1st start with the equation:
: : : R(g)=2*J1(x)/x where x=pi*D/l*sin(g)
: : : - These equations are in krautramer though I have used g instead of "gamma" and l instead of "lambda"
: : : To find a "k" for a certain dB drop, you start with the J1(x)/x term, equating that to the desired amplitude reduction. For example: J1(x)/x=.5 for a 6dB drop of the "free field", or for the "echo field", (J1(x)/x)^2=.5. You need to then use a numerical solver to obtain the x that satisfies the equation for the particular dB drop you are interested in.
: : : Now, using the second equation, x=pi*D/l*sin(g). You can rewrite this equation as: sin(g)=(x/pi)*(l/D). "k" is simply the quantity (x/pi), thus you get the equation in the Krautkramer book.
: : : For rectangular oscillators, the process is the same with the exception of using Sin(x)/x instead of J1(x)/x
: : : -Jim
: : : : I have been asked how the values for "k" used in the beam divergence equations have been derived. My favourite references of Krautkramer and Ermolov touch on the subject and allude to the use of the Bessel J1(x) function. However, I cannot find the link to the k values for dB drop using this function described in either text.
: : : : Does anyone have a more complete formulation of the equations to derive k?
: : Morning Ed,
: : Some years ago I had a similar situation, we were using a K factor of 1.08 for the 20dB edge and the theoretical determination of the beam was always larger than the practical determination. The 2 K factors we were told to use (from the training and examination boards) were 1.22 for the infinite edge and 1.08 for the 20 dB edge.
: : In the little pocket book, the "Krautkramer Blue Book",
: : listed K factor for the 20dB edge for rectangular crystals as 0.87. When we used this constant the practical and the theoretical determination of the edge of the beam were very similar. I asked the author of the "Blue Book" Udo Schlengermann and he explained that originally that these constants came from astronomy and light transmission from celestial bodies. Which meant that the K factor of 1.08 is for through transmission whereas the K factor of 0.87 is for pulse echo.
: : Hope this helps in the history.
: : Regards
: : Neil Burleigh
------------ End Original Message ------------

Neil Burleigh
Sales
Krautkramer Australia Pty Ltd, Australia, Joined Dec 2002, 159

Neil Burleigh

Sales
Krautkramer Australia Pty Ltd,
Australia,
Joined Dec 2002
159
03:44 Dec-16-2008
Re: KK factor
----------- Start Original Message -----------
G'day Joe,
I will check in the publicity department within GE to see if they have produced an electronic copy.
Merry Christmas from Down under

Neil Burleigh

: Udo,
: If GE are no longer circulating the Blue book, do you thuink there is any possibility of getting it uploaded to the internet?
: I have to say that it would be in my top 5 of 'most useful NDT documents' and I would be really upset if I ever lost mine.
: Joe
: : Hello Ed, Jim and Neil,
: : the explanations for the derivation of the k factor of sound beam divergence are correct.
: : The pulse-echo technique has to take into account the characteristics of both the transmitting and the receiving transducer.
: : With equal transducers and with the logarithmic decibel-notation it simply means half the dB-drop as for free radiation.
: : For circular sources Bessels function J1(x)/x has to be used.
: : For rectangular sources it is the function sin(x)/xfor one direction and sin(y)/y for the perpendicular direction.
: : Unfortunately neither Krautkramer's blue pocket book nor Krautkramer's red book on ultrasonic materials testing are available anymore.
: : As everything has been said by my former collegues, I take the chance to wish everyboby
: : a Merry Christmas and a Prosperous New Year.
: : Best regards
: : Udo Schlengermann
: : Chairman ISO/TC135/SC3 (UT)
: : Chairman CEN/TC138/WG2 (UT)
: :
: : : : Ed,
: : : : To derive the values for "k" in the beam divergence equation for circular oscillators, 1st start with the equation:
: : : : R(g)=2*J1(x)/x where x=pi*D/l*sin(g)
: : : : - These equations are in krautramer though I have used g instead of "gamma" and l instead of "lambda"
: : : : To find a "k" for a certain dB drop, you start with the J1(x)/x term, equating that to the desired amplitude reduction. For example: J1(x)/x=.5 for a 6dB drop of the "free field", or for the "echo field", (J1(x)/x)^2=.5. You need to then use a numerical solver to obtain the x that satisfies the equation for the particular dB drop you are interested in.
: : : : Now, using the second equation, x=pi*D/l*sin(g). You can rewrite this equation as: sin(g)=(x/pi)*(l/D). "k" is simply the quantity (x/pi), thus you get the equation in the Krautkramer book.
: : : : For rectangular oscillators, the process is the same with the exception of using Sin(x)/x instead of J1(x)/x
: : : : -Jim
: : : : : I have been asked how the values for "k" used in the beam divergence equations have been derived. My favourite references of Krautkramer and Ermolov touch on the subject and allude to the use of the Bessel J1(x) function. However, I cannot find the link to the k values for dB drop using this function described in either text.
: : : : : Does anyone have a more complete formulation of the equations to derive k?
: : : Morning Ed,
: : : Some years ago I had a similar situation, we were using a K factor of 1.08 for the 20dB edgeand the theoretical determination of the beam was always larger than the practical determination. The 2 K factors we were told to use (from the training and examination boards) were 1.22 for the infinite edge and 1.08 for the 20 dB edge.
: : : In the little pocket book, the "Krautkramer Blue Book",
: : : listed K factor for the 20dB edge for rectangular crystals as 0.87. When we used this constant the practical and the theoretical determination of the edge of the beam were very similar. I asked the author of the "Blue Book" Udo Schlengermann and he explained that originally that these constants came from astronomy and light transmission from celestial bodies. Which meant that the K factor of 1.08 is for through transmission whereas the K factor of 0.87 is for pulse echo.
: : : Hope this helps in the history.
: : : Regards
: : : Neil Burleigh
------------ End Original Message ------------

S.V.Swamy
Engineering, - Material Testing Inspection & Quality Control
Retired from Nuclear Fuel Complex , India, Joined Feb 2001, 787

S.V.Swamy

Engineering, - Material Testing Inspection & Quality Control
Retired from Nuclear Fuel Complex ,
India,
Joined Feb 2001
787
07:45 Dec-17-2008
Re: k factor
Sir,

You wrote:

As everything has been said by my former collegues, I take the chance to wish everyboby
: a Merry Christmas and a Prosperous New Year.
: Best regards
: Udo Schlengermann
: Chairman ISO/TC135/SC3 (UT)
: Chairman CEN/TC138/WG2 (UT)

I too take this opportunity to wish you a happy new year. I tried to mail you separately but the mail was rejected.

With best wishes,

Swamy
ndtguru@gmail.com

----------- Start Original Message -----------
: Hello Ed, Jim and Neil,
: the explanations for the derivation of the k factor of sound beam divergence are correct.
: The pulse-echo technique has to take into account the characteristics of both the transmitting and the receiving transducer.
: With equal transducers and with the logarithmic decibel-notation it simply means half the dB-drop as for free radiation.
: For circular sources Bessels function J1(x)/x has to be used.
: For rectangular sources it is the function sin(x)/x for one direction and sin(y)/y for the perpendicular direction.
: Unfortunately neither Krautkramer's blue pocket book nor Krautkramer's red book on ultrasonic materials testing are available anymore.
: As everything has been said by my former collegues, I take the chance to wish everyboby
: a Merry Christmas and a Prosperous New Year.
: Best regards
: Udo Schlengermann
: Chairman ISO/TC135/SC3 (UT)
: Chairman CEN/TC138/WG2 (UT)

Ed Ginzel
R & D, -
Materials Research Institute, Canada, Joined Nov 1998, 1300

Ed Ginzel

R & D, -
Materials Research Institute,
Joined Nov 1998
1300
02:59 Dec-17-2008
Re: k factor
Thank you all for the explanations!
The little blue book being discontinued is bad..but I am also saddened to read that the main text is also discontinued!
Regards
Ed

----------- Start Original Message -----------
: Hello Ed, Jim and Neil,
: the explanations for the derivation of the k factor of sound beam divergence are correct.
: The pulse-echo technique has to take into account the characteristics of both the transmitting and the receiving transducer.
: With equal transducers and with the logarithmic decibel-notation it simply means half the dB-drop as for free radiation.
: For circular sources Bessels function J1(x)/x has to be used.
: For rectangular sources it is the function sin(x)/x for one direction and sin(y)/y for the perpendicular direction.
: Unfortunately neither Krautkramer's blue pocket book nor Krautkramer's red book on ultrasonic materials testing are available anymore.
: As everything has been said by my former collegues, I take the chance to wish everyboby
: a Merry Christmas and a Prosperous New Year.
: Best regards
: Udo Schlengermann
: Chairman ISO/TC135/SC3 (UT)
: Chairman CEN/TC138/WG2 (UT)
:
: : : Ed,
: : : To derive the values for "k" in the beam divergence equation for circular oscillators, 1st start with the equation:
: : : R(g)=2*J1(x)/x where x=pi*D/l*sin(g)
: : : - These equations are in krautramer though I have used g instead of "gamma" and l instead of "lambda"
: : : To find a "k" for a certain dB drop, you start with the J1(x)/x term, equating that to the desired amplitude reduction. For example: J1(x)/x=.5 for a 6dB drop of the "free field", or for the "echo field", (J1(x)/x)^2=.5. You need to then use a numerical solver to obtain the x that satisfies the equation for the particular dB drop you are interested in.
: : : Now, using the second equation, x=pi*D/l*sin(g). You can rewrite this equation as: sin(g)=(x/pi)*(l/D). "k" is simply the quantity (x/pi), thus you get the equation inthe Krautkramer book.
: : : For rectangular oscillators, the process is the same with the exception of using Sin(x)/x instead of J1(x)/x
: : : -Jim
: : : : I have been asked how the values for "k" used in the beam divergence equations have been derived. My favourite references of Krautkramer and Ermolov touch on the subject and allude to the use of the Bessel J1(x) function. However, I cannot find the link to the k values for dB drop using this function described in either text.
: : : : Does anyone have a more complete formulation of the equations to derive k?
: : Morning Ed,
: : Some years ago I had a similar situation, we were using a K factor of 1.08 for the 20dB edge and the theoretical determination of the beam was always larger than the practical determination. The 2 K factors we were told to use (from the training and examination boards) were 1.22 for the infinite edge and 1.08 for the 20 dB edge.
: : In the little pocket book, the "Krautkramer Blue Book",
: : listed K factor for the 20dB edge for rectangular crystals as 0.87. When we used this constant the practical and the theoretical determination of the edge of the beam were very similar. I asked the author of the "Blue Book" Udo Schlengermann and he explained that originally that these constants came from astronomy and light transmission from celestial bodies. Which meant that the K factor of 1.08 is for through transmission whereas the K factor of 0.87 is for pulse echo.
: : Hope this helps in the history.
: : Regards
: : Neil Burleigh
------------ End Original Message ------------

Product Spotlight

#### Sci Aps Z-Series Portable Handheld Analysers

The world’s only handheld analyzer that measures carbon content in stainless (yes even L-grades),s
...
teels, and cast irons. Also accepted for low Si analysis for sulfidic corrosion analysis, and is widely used in the power industry for Cr analysis, for flow accelerated corrosion applications.
>

#### A1525 SOLO

A1525 Solo – the most compact and affordable TMF unit with two phased array transducers and 3D v
...
isualization and analysis software in standard delivery set. A compact, ergonomic and easy to handheld Phased Array unit based on Total Focusing Method for easy-going imaging of inspection objects with two-dimensional and three-dimensional visualization and evaluation of inspection results.
>

#### HD-CR 35 NDT Computed Radiography System

Portable high-resolution CR scanner for all radiography applications - weld testing, profile images
...
and aerospace. No matter what type of radiographic testing you are performing, the unique TreFoc Technology of the HD-CR 35 NDT imaging plate scanner always guarantees the highest image quality.
>

#### FMC/TFM

Next generation for Phased Array UT is here now with FMC/TFM! Have higher resolution imaging, impr
...
oved signal to noise ratio, characterize, size and analyze defects better with access to several wave mode views and save raw FMC data for higher quality analysis.  Some of the benefits are:
• Beautiful Image! Easier to understand what you're looking at
• Completely focused in entire image or volume
• Much easier to define setups before inspection
• Easier to decipher geometry echoes from real defects
• Oriented defects (e.g. cracks) are imaged better
• See image from different wave modes from one FMC inspection
• FMC data can be reprocessed/analyzed without going back to the field
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window