where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
1005 views
Technical Discussions
Amedeo Marino
Amedeo Marino
04:59 Jun-21-2000
Thickness measurements of a 6" tube.

Dear all,
I have been asked to measure the thickness of the internal wall of a 6" tube, not accessible from outside.
Tubes are 12 meters long.
Does anybody know how to realise this inspection ?
Thank you in advance.




 
 Reply 
 
Peter Többen
Consultant
Germany, Joined May 2000, 3

Peter Többen

Consultant
Germany,
Joined May 2000
3
05:13 Jun-21-2000
Re: Thickness measurements of a 6" tube.



 
 Reply 
 
David Hermanutz
Consultant,
Hbndt.com, China, Joined Jul 2012, 85

David Hermanutz

Consultant,
Hbndt.com,
China,
Joined Jul 2012
85
03:22 Jun-22-2000
Re: Thickness measurements of a 6" tube.
: Dear all,
: I have been asked to measure the thickness of the internal wall of a 6" tube, not accessible from outside.
: Tubes are 12 meters long.
: Does anybody know how to realise this inspection ?
: Thank you in advance.

This is a common inspection in the petrochemical industry, thier are several commercial units available in the states. Key search word is IRIS (internal rotary inspection system) I believe one manufacturer is D and M technologies in Texas. Panametrics also supplies of the shelf immersion and squirter probes.




 
 Reply 
 
Himanshu Ranade
Director, Application Development
Fallon Ultrasonic (India) Pvt. ltd., India, Joined Apr 2000, 2

Himanshu Ranade

Director, Application Development
Fallon Ultrasonic (India) Pvt. ltd.,
India,
Joined Apr 2000
2
06:40 Jun-22-2000
Re: Thickness measurements of a 6" tube.
You can use a 4-channel Ultrasonic Dimension Monitoring system consisting of PC based pulser receiver, 4 10 MHz. probes including one for continuous callibration and special probe holder which measures the I.D., O.D from the bore at 3 different points and avarages to give the exact I.D., O.D. and Wall thickness with accuracy of 1 micron. The readings are recorded in the PC and can be recalled for analysis. The frequency of probes will depend on the wall thickness of the tubes. The probe holder can either be rotated manually or provided a motor drive. Also system configuration will depend on the accuracy you need and total number of tubes you want to test..You will need to fill the tube with water as this is immersion technique.

If you need any more details you can contact me Himanshu Ranade at echo@vsnl.com



 
 Reply 
 

Product Spotlight

Echomac® Small

Available with up to eight channels of electronics to detect and evaluate thickness, flaws and eccen
...
tricity, this UT tester is housed in a convenient, smaller cabinet. This instrument can be used in conjunction with bubbler or immersion tank systems, or with a test bench or in laboratory applications. The Echomac® Small is available in the FD4, FD6 or FD6A versions.
>

EKOSCAN Phased Array

In order to always fit your needs, EKOSCAN can manufacture any type of UT transducer, either convent
...
ional or Phased Array. As an ISO 9001: 2015 certified company, EKOSCAN is extremely careful as far a material selection and manufacturing processes are concerned. Our probes guarantee our customers the benefits of latest innovations regarding piezo-composite, backing, impedance adaptation layer, etc. Specific probes for hostile environment: high temperature, high pressure, corrosive environment,etc. Specific probes designed to fit your specific application: optimization of every parameter to guarantee you the best detection.
>

High-performance Linear Phased Array Probes

Available to order from stock in a range of 5MHz – 7.5MHz and from 16 to 64 elements. Designed w
...
ith piezo-composite elements, Phoenix phased array probes provide high-resolution imaging to maximise sensitivity; accurate ultrasonic detection and sizing of defects in welds; and effective corrosion mapping. Housed in a rugged stainless steel case for on-site industrial NDT applications.
>

Sci Aps Z-Series Portable Handheld Analysers

The world’s only handheld analyzer that measures carbon content in stainless (yes even L-grades),s
...
teels, and cast irons. Also accepted for low Si analysis for sulfidic corrosion analysis, and is widely used in the power industry for Cr analysis, for flow accelerated corrosion applications.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window