where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

Canadian Institute for NDE
We are specialized in training for Radiography, Ultrasonics, Magnetic Particle, Liquid Penetrant, Eddy Current and emerging NDT technologies.
1363 views
Technical Discussions
Norm Woodward
Norm Woodward
07:22 Jun-23-2000
Low kv, pulsed x-ray source

We are hoping to use portable digital x-ray systems, such as those used to locate explosives in luggage, to find entrapped water in aircraft honeycomb structures.

The main problem is that these systems typically use the Golden Engineering 160kv pulsed source, which requires a lot of water in aluminum or composite skinned structures, to cast a shadow. Thus we are seeking much lower kv source, ideally 55 to 75kv.

We are aware that this is the range of medical and dental equipment, but thus far we have not located a stand-alone system that could be readily adapted to our needs.

Besides the above mentioned kilovolt range, we are looking for characteristics similar to that of the Golden Engineering System, that is, lightweight (< 10kg), and, ideally, relatively inexpensive and able to be battery-powered.

Any help would be appreciated.

Norm Woodward


 
 Reply 
 
John Pursley
R & D
Envision Product Design, USA, Joined Oct 1999, 23

John Pursley

R & D
Envision Product Design,
USA,
Joined Oct 1999
23
02:09 Jun-23-2000
Re: Low kv, pulsed x-ray source
: We are hoping to use portable digital x-ray systems, such as those used to locate explosives in luggage, to find entrapped water in aircraft honeycomb structures.

: The main problem is that these systems typically use the Golden Engineering 160kv pulsed source, which requires a lot of water in aluminum or composite skinned structures, to cast a shadow. Thus we are seeking much lower kv source, ideally 55 to 75kv.

: We are aware that this is the range of medical and dental equipment, but thus far we have not located a stand-alone system that could be readily adapted to our needs.

: Besides the above mentioned kilovolt range, we are looking for characteristics similar to that of the Golden Engineering System, that is, lightweight (< 10kg), and, ideally, relatively inexpensive and able to be battery-powered.

: Any help would be appreciated.

: Norm Woodward


Hi Norm,
The problem you describe with using the Golder Engineering pulse source has more to do with the imaging technology you are using than on the energy source.
Our latest digital X-ray system is completely battery operated and uses the Golden source to produce excellent (2-1T, >10 lp/mm) instant images from the thinest of materials up to .4" steel.
Click on http://DigitalRadioscopy.com for information on our Wearable X-ray Vision (tm) system.



 
 Reply 
 
Joseph Pascente
Engineering
Lixi, Inc., USA, Joined Nov 1998, 39

Joseph Pascente

Engineering
Lixi, Inc.,
USA,
Joined Nov 1998
39
07:05 Jun-25-2000
Low kv, pulsed x-ray source
Dear Norm,

Please go to www.lixi.com for a low energy pulse
portable X-Ray.


Regards,

Lixi, Inc.


Joe Pascente


 
 Reply 
 
David Singer
David Singer
01:09 Jul-13-2000
Re: Low kv, pulsed x-ray source
: We are hoping to use portable digital x-ray systems, such as those used to locate explosives in luggage, to find entrapped water in aircraft honeycomb structures.

: The main problem is that these systems typically use the Golden Engineering 160kv pulsed source, which requires a lot of water in aluminum or composite skinned structures, to cast a shadow. Thus we are seeking much lower kv source, ideally 55 to 75kv.

: We are aware that this is the range of medical and dental equipment, but thus far we have not located a stand-alone system that could be readily adapted to our needs.

: Besides the above mentioned kilovolt range, we are looking for characteristics similar to that of the Golden Engineering System, that is, lightweight (< 10kg), and, ideally, relatively inexpensive and able to be battery-powered.

: Any help would be appreciated.

: Norm Woodward

I happen to know that Vidisco Ltd. of Israel have developed a real time system that has been approved by boeing and is being used by theIsrael Aircraft Industry for just this purpose. In fact, if I am not mistaken, they have an example image on their website. www.vidisco.com (If not then try .co.il.)
Happy to be of service.
David Singer


 
 Reply 
 
Sahýn Delýpýnar
Sahýn Delýpýnar
04:56 Nov-10-2000
Re: Low kv, pulsed x-ray source
: : We are hoping to use portable digital x-ray systems, such as those used to locate explosives in luggage, to find entrapped water in aircraft honeycomb structures.

: : The main problem is that these systems typically use the Golden Engineering 160kv pulsed source, which requires a lot of water in aluminum or composite skinned structures, to cast a shadow. Thus we are seeking much lower kv source, ideally 55 to 75kv.

: : We are aware that this is the range of medical and dental equipment, but thus far we have not located a stand-alone system that could be readily adapted to our needs.

: : Besides the above mentioned kilovolt range, we are looking for characteristics similar to that of the Golden Engineering System, that is, lightweight (< 10kg), and, ideally, relatively inexpensive and able to be battery-powered.

: : Any help would be appreciated.

: : Norm Woodward

: I happen to know that Vidisco Ltd. of Israel have developed a real time system that has been approved by boeing and is being used by the Israel Aircraft Industry for just this purpose. In fact, if I am not mistaken, they have an example image on their website. www.vidisco.com (If not then try .co.il.)
: Happy to be of service.
: David Singer




 
 Reply 
 
John Pursley
R & D
Envision Product Design, USA, Joined Oct 1999, 23

John Pursley

R & D
Envision Product Design,
USA,
Joined Oct 1999
23
00:33 Nov-10-2000
Re: Low kv, pulsed x-ray source
: : We are hoping to use portable digital x-ray systems, such as those used to locate explosives in luggage, to find entrapped water in aircraft honeycomb structures.

: : The main problem is that these systems typically use the Golden Engineering 160kv pulsed source, which requires a lot of water in aluminum or composite skinned structures, to cast a shadow. Thus we are seeking much lower kv source, ideally 55 to 75kv.

: : We are aware that this is the range of medical and dental equipment, but thus far we have not located a stand-alone system that could be readily adapted to our needs.

: : Besides the above mentioned kilovolt range, we are looking for characteristics similar to that of the Golden Engineering System, that is, lightweight (< 10kg), and, ideally, relatively inexpensive and able to be battery-powered.

: : Any help would be appreciated.

: : Norm Woodward


We now have an 80 Kev / 3 ma X-ray source that is small, battery operated, and light weight. See us at the ASNT conference in Indianapolis booth 328, or call 907-563-1141.



 
 Reply 
 
Patrick Doty
Patrick Doty
06:34 Oct-18-2001
Re: Low kv, pulsed x-ray source
: We are hoping to use portable digital x-ray systems, such as those used to locate explosives in luggage, to find entrapped water in aircraft honeycomb structures.

: The main problem is that these systems typically use the Golden Engineering 160kv pulsed source, which requires a lot of water in aluminum or composite skinned structures, to cast a shadow. Thus we are seeking much lower kv source, ideally 55 to 75kv.

: We are aware that this is the range of medical and dental equipment, but thus far we have not located a stand-alone system that could be readily adapted to our needs.

: Besides the above mentioned kilovolt range, we are looking for characteristics similar to that of the Golden Engineering System, that is, lightweight (< 10kg), and, ideally, relatively inexpensive and able to be battery-powered.

: Any help would be appreciated.

: Norm Woodward

Nuetron radiography is excells for imaging water in aircraft structures. There is a facility (currently under utilized) dedicated to this at the former McClellan AFB in Sacremento.


 
 Reply 
 

Product Spotlight

Research and Application Development For NDT

Acuren’s Research and Application Development specializes in the development of advanced ultraso
...
nic inspection techniques and systems for challenging inspection applications, with an emphasis on practical solutions which are field deployable. Services include manual and automated ultrasonic inspection system development, inspection technique optimization using laboratory scale studies and ultrasonic modeling (CIVA, BeamTool), preparing technical justification for technique evaluation and qualification (Probability of Detection and sizing accuracy studies), inspection/calibration/analysis procedure preparation to support field deployment of custom techniques, and development of custom imaging algorithms to support challenging inspection applications.
>

YXLON Cougar EVO

Scalable small footprint X-ray inspection systems for assembly and laboratory applications. The
...
YXLON Cougar EVO series was designed to provide the "best-in- class" inspection solutions for SMT, semiconductor, and laboratory assembly applications, while maintaining a small system footprint for maximum convenience. With optimized software and hardware, these systems produce higher quality and more consistent results than other electronics inspection systems currently on the market.
>

Varex Imaging Large Field of View (FOV) Digital Detector Arrays (DDAs)

A larger FOV DDA can reduce the space and volume of the X-ray inspection system on the factory floor
...
, enable faster scanning times, better throughput and better resolution images at a lower dose. Customers can also save time and money. With these benefits in mind, Varex Imaging has designed a family of large FOV detectors (4343HE, XRD 1611, 4343DX-I, 4343CT) for our industrial imaging customers.
>

32:128PR PAUT & 2-ch TOFD Flaw Detector: SyncScan 2

●32:128PR PAUT with optional 2-ch TOFD to maximize your efficiency ●Support PR mode for corrosi
...
on inspection ●Multiple solutions for welds & corrosion ●Faster scan speed (Approximately 3 meters/minute) ●Light weight: 4kg only including battery
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window