where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
996 views
Technical Discussions
David Baum
David Baum
09:21 Jun-23-2000
Thin Gauge Steel Tubes

I am looking for a reliable way to UT thin gauge, under 5/16", steel tube that has a circumferential joint joined utilizing a backing bar.


 
 Reply 
 
Tom Nelligan
Engineering,
retired, USA, Joined Nov 1998, 390

Tom Nelligan

Engineering,
retired,
USA,
Joined Nov 1998
390
09:30 Jun-23-2000
Re: Thin Gauge Steel Tubes
: I am looking for a reliable way to UT thin gauge, under 5/16", steel tube that has a circumferential joint joined utilizing a backing bar.

I'm not sure I'm properly visualizing what you're doing, but if it's a brazed or welded joint, we may be able to do something with small diameter, sharply focussed immersion transducers and appropriate fixturing. The tube diameter itself is not a problem. If it's just mechanically clamped, on the other hand, it's not a good application for ultrasonic flaw detection.

I'd be happy to look at a drawing if you can send one.

--Tom Nelligan
Panametrics, Inc.




 
 Reply 
 
Joseph Pascente
Engineering
Lixi, Inc., USA, Joined Nov 1998, 39

Joseph Pascente

Engineering
Lixi, Inc.,
USA,
Joined Nov 1998
39
07:02 Jun-25-2000
Re: Thin Gauge Steel Tubes
Dear Tom,

Go to www.lixi.com and then to Profiler. This non
contact wall thickness gauge will measure the wall
thickness of thin gauge steel tubes.


Regards,

Lixi, Inc.


Joe Pascente


 
 Reply 
 
Rick Pfannenstiel
Consultant
Spin LLC, USA, Joined Jun 2000, 1

Rick Pfannenstiel

Consultant
Spin LLC,
USA,
Joined Jun 2000
1
04:14 Jun-29-2000
Re: Thin Gauge Steel Tubes
We have been inspecting buttwelds in .056"T by 1.0" diameter buttwelds in inconnel tubing with great success using FAST ultrasonics. The backing ring should not be a problem. Not sure that this application is close to what you are doing. If you would like more information please email me.


 
 Reply 
 
Alexander Tsankov
Alexander Tsankov
01:17 Aug-03-2000
Carbon Steel Tubes
Dear Sirs,
I am interested in Carbon Steel Tubes with diameter 40-48mm. If you can help me please send me Reply on my e-mail: powercom@netbg.com.

Sincerelly Yours
A. Tsankov


 
 Reply 
 

Product Spotlight

Surf-X® Array Probe

Introducing the Surf-X family of flexible Eddy Current Array (ECA) probes. Featuring unique multiple
...
coil sets and proprietary X-PROBE technology, Surf-X array probes can quickly and accurately handle a range of inspection applications, from inspecting corrosion or cracking in pipes, pressure vessels, or tanks, to assessing and sizing cracks in raised welds and friction stir welds.
>

Teletest Focus+

Teletest Focus+ electronics have superior capabilities than rivals on the market. Beyond the usual
...
test features, Focus+ has 24 transmit channels and 24 receive channels, with an additional on-board switching capabilities. The instrument's frequency range is 10–300 kHz.
>

GUL QSR1® Scanning

How do you measure pipe wall thickness without direct access to the area? QSR® Scanning - Guide Wav
...
e Quantitative Short Range Scanning.
>

iProbe - USB Phased Array Probe

Turn your PC, Laptop or Tablet into a powerful 32:64 Phased Array system with our USB powered Phas
...
ed Array iProbe and inspection software package. Perform affordable weld inspection and corrosion mapping inspections with this powerful but small system. The probe has a 100V pulser, 8K PRF, dual axis encoder input and achieves outstanding signal quality.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window