where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
1364 views
Technical Discussions
Norm Woodward
Norm Woodward
07:22 Jun-23-2000
Low kv, pulsed x-ray source

We are hoping to use portable digital x-ray systems, such as those used to locate explosives in luggage, to find entrapped water in aircraft honeycomb structures.

The main problem is that these systems typically use the Golden Engineering 160kv pulsed source, which requires a lot of water in aluminum or composite skinned structures, to cast a shadow. Thus we are seeking much lower kv source, ideally 55 to 75kv.

We are aware that this is the range of medical and dental equipment, but thus far we have not located a stand-alone system that could be readily adapted to our needs.

Besides the above mentioned kilovolt range, we are looking for characteristics similar to that of the Golden Engineering System, that is, lightweight (< 10kg), and, ideally, relatively inexpensive and able to be battery-powered.

Any help would be appreciated.

Norm Woodward


 
 Reply 
 
John Pursley
R & D
Envision Product Design, USA, Joined Oct 1999, 23

John Pursley

R & D
Envision Product Design,
USA,
Joined Oct 1999
23
02:09 Jun-23-2000
Re: Low kv, pulsed x-ray source
: We are hoping to use portable digital x-ray systems, such as those used to locate explosives in luggage, to find entrapped water in aircraft honeycomb structures.

: The main problem is that these systems typically use the Golden Engineering 160kv pulsed source, which requires a lot of water in aluminum or composite skinned structures, to cast a shadow. Thus we are seeking much lower kv source, ideally 55 to 75kv.

: We are aware that this is the range of medical and dental equipment, but thus far we have not located a stand-alone system that could be readily adapted to our needs.

: Besides the above mentioned kilovolt range, we are looking for characteristics similar to that of the Golden Engineering System, that is, lightweight (< 10kg), and, ideally, relatively inexpensive and able to be battery-powered.

: Any help would be appreciated.

: Norm Woodward


Hi Norm,
The problem you describe with using the Golder Engineering pulse source has more to do with the imaging technology you are using than on the energy source.
Our latest digital X-ray system is completely battery operated and uses the Golden source to produce excellent (2-1T, >10 lp/mm) instant images from the thinest of materials up to .4" steel.
Click on http://DigitalRadioscopy.com for information on our Wearable X-ray Vision (tm) system.



 
 Reply 
 
Joseph Pascente
Engineering
Lixi, Inc., USA, Joined Nov 1998, 39

Joseph Pascente

Engineering
Lixi, Inc.,
USA,
Joined Nov 1998
39
07:05 Jun-25-2000
Low kv, pulsed x-ray source
Dear Norm,

Please go to www.lixi.com for a low energy pulse
portable X-Ray.


Regards,

Lixi, Inc.


Joe Pascente


 
 Reply 
 
David Singer
David Singer
01:09 Jul-13-2000
Re: Low kv, pulsed x-ray source
: We are hoping to use portable digital x-ray systems, such as those used to locate explosives in luggage, to find entrapped water in aircraft honeycomb structures.

: The main problem is that these systems typically use the Golden Engineering 160kv pulsed source, which requires a lot of water in aluminum or composite skinned structures, to cast a shadow. Thus we are seeking much lower kv source, ideally 55 to 75kv.

: We are aware that this is the range of medical and dental equipment, but thus far we have not located a stand-alone system that could be readily adapted to our needs.

: Besides the above mentioned kilovolt range, we are looking for characteristics similar to that of the Golden Engineering System, that is, lightweight (< 10kg), and, ideally, relatively inexpensive and able to be battery-powered.

: Any help would be appreciated.

: Norm Woodward

I happen to know that Vidisco Ltd. of Israel have developed a real time system that has been approved by boeing and is being used by theIsrael Aircraft Industry for just this purpose. In fact, if I am not mistaken, they have an example image on their website. www.vidisco.com (If not then try .co.il.)
Happy to be of service.
David Singer


 
 Reply 
 
Sahýn Delýpýnar
Sahýn Delýpýnar
04:56 Nov-10-2000
Re: Low kv, pulsed x-ray source
: : We are hoping to use portable digital x-ray systems, such as those used to locate explosives in luggage, to find entrapped water in aircraft honeycomb structures.

: : The main problem is that these systems typically use the Golden Engineering 160kv pulsed source, which requires a lot of water in aluminum or composite skinned structures, to cast a shadow. Thus we are seeking much lower kv source, ideally 55 to 75kv.

: : We are aware that this is the range of medical and dental equipment, but thus far we have not located a stand-alone system that could be readily adapted to our needs.

: : Besides the above mentioned kilovolt range, we are looking for characteristics similar to that of the Golden Engineering System, that is, lightweight (< 10kg), and, ideally, relatively inexpensive and able to be battery-powered.

: : Any help would be appreciated.

: : Norm Woodward

: I happen to know that Vidisco Ltd. of Israel have developed a real time system that has been approved by boeing and is being used by the Israel Aircraft Industry for just this purpose. In fact, if I am not mistaken, they have an example image on their website. www.vidisco.com (If not then try .co.il.)
: Happy to be of service.
: David Singer




 
 Reply 
 
John Pursley
R & D
Envision Product Design, USA, Joined Oct 1999, 23

John Pursley

R & D
Envision Product Design,
USA,
Joined Oct 1999
23
00:33 Nov-10-2000
Re: Low kv, pulsed x-ray source
: : We are hoping to use portable digital x-ray systems, such as those used to locate explosives in luggage, to find entrapped water in aircraft honeycomb structures.

: : The main problem is that these systems typically use the Golden Engineering 160kv pulsed source, which requires a lot of water in aluminum or composite skinned structures, to cast a shadow. Thus we are seeking much lower kv source, ideally 55 to 75kv.

: : We are aware that this is the range of medical and dental equipment, but thus far we have not located a stand-alone system that could be readily adapted to our needs.

: : Besides the above mentioned kilovolt range, we are looking for characteristics similar to that of the Golden Engineering System, that is, lightweight (< 10kg), and, ideally, relatively inexpensive and able to be battery-powered.

: : Any help would be appreciated.

: : Norm Woodward


We now have an 80 Kev / 3 ma X-ray source that is small, battery operated, and light weight. See us at the ASNT conference in Indianapolis booth 328, or call 907-563-1141.



 
 Reply 
 
Patrick Doty
Patrick Doty
06:34 Oct-18-2001
Re: Low kv, pulsed x-ray source
: We are hoping to use portable digital x-ray systems, such as those used to locate explosives in luggage, to find entrapped water in aircraft honeycomb structures.

: The main problem is that these systems typically use the Golden Engineering 160kv pulsed source, which requires a lot of water in aluminum or composite skinned structures, to cast a shadow. Thus we are seeking much lower kv source, ideally 55 to 75kv.

: We are aware that this is the range of medical and dental equipment, but thus far we have not located a stand-alone system that could be readily adapted to our needs.

: Besides the above mentioned kilovolt range, we are looking for characteristics similar to that of the Golden Engineering System, that is, lightweight (< 10kg), and, ideally, relatively inexpensive and able to be battery-powered.

: Any help would be appreciated.

: Norm Woodward

Nuetron radiography is excells for imaging water in aircraft structures. There is a facility (currently under utilized) dedicated to this at the former McClellan AFB in Sacremento.


 
 Reply 
 

Product Spotlight

AIS229 - Multipurpose Real Time System

Latest standard & automatic real time system developed by Balteau. The AIS229 has been designed to
...
do series inspection in a wide variety of industry. Composed of a shielded cabinet, 5 axis manipulator, x-ray generator and tubehead from 160kV to 225kV, a fl at panel & much more, the AIS229 is most certainly one of the most multipurpose RTR system available on the market.
>

On-Demand Webinar: Advanced Ultrasonic Techniques for HTHA Detection & Assessment

In the Oil and Gas industry, High Temperature Hydrogen Attack (HTHA) can occur in steels operating a
...
t high temperature, usually above 205°C (400°F). Early stages of HTHA are very difficult to detect. Join us for a webinar presented by Guy Maes, Zetec Sales Engineer Director. The webinar will demonstrate how advanced ultrasonic techniques are deployed for efficient and reliable HTHA inspections.
>

HARDNESS TESTER TKM-459CE combi

TKM-459CE combi applies 2 methods of hardness control: UCI and Leeb. It provides high-accuracy tes
...
ting of metals and alloys as well as items of different sizes and configurations, their hardened layers and galvanic coatings. Device represents results in HB, HRC, HV and others. Shock-, dust- and water-proof housing with intuitive software make this gauge easy to use in all working conditions.
>

Robotic laser shearography enables 100% inspection of complex, flight-critical composite structures

An article in “Composites World Magazine” showcases Non Destructive Testing of aero-structures
...
with Laser Shearography. Over the years Dantec Dynamics has supplied many solutions for the aerospace industry. Referring to specific customer projects several of these cases are examined to outline the advantages of using Laser Shearography for automated defect detection.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window