where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
649 views
Technical Discussions
S S Ananthan
Consultant,
RAA Tech Solutions, India, Joined Jun 2000, 36

S S Ananthan

Consultant,
RAA Tech Solutions,
India,
Joined Jun 2000
36
05:59 Jun-26-2000
Hydrogen embritllement study using UT

I am interested in knowing the techniques used in identfying the presence of Hydrogen embrittlement in hydrocracking vessels in oil refineries ( thickness about 100 mm. )

S S Ananthan



 
 Reply 
 
Steve Kane
Steve Kane
09:58 Jun-26-2000
Re: Hydrogen embritllement study using UT
The easiest method for you may be to utilize a manual Rockwell hardness tester. Compared to a known calibrator, you may establish RC hardness guidelines.



 
 Reply 
 
Jan Verkooijen
Director,
Sonovation, Netherlands, Joined Nov 1998, 29

Jan Verkooijen

Director,
Sonovation,
Netherlands,
Joined Nov 1998
29
01:13 Jun-27-2000
Re: Hydrogen embritllement study using UT
AEA Sonomatic BV has been working in this area for over
a decade now and has build up a vast reference in this
application. Procedures were validated with clients and
Authorised Inspection bodies such as Stoomwezen (1992)
and TueV Nord (1999). Procedures are based upon research
of established research institutes and our own research
and practical experiences.
An article describing this in some more detail can be found
on this site under:
www.ndt.net/article/ecndt98/chemical/105/105.htm
a product descriptor can be found under
http://www.aeat.co.uk/energy/prdsrv/inspect/fldser/hha.htm
Please do not hesitate to contact me
if you require any more information.

Jan Verkooijen


 
 Reply 
 

Product Spotlight

Sci Aps Z-Series Portable Handheld Analysers

The world’s only handheld analyzer that measures carbon content in stainless (yes even L-grades),s
...
teels, and cast irons. Also accepted for low Si analysis for sulfidic corrosion analysis, and is widely used in the power industry for Cr analysis, for flow accelerated corrosion applications.
>

Teletest Focus+

Teletest Focus+ electronics have superior capabilities than rivals on the market. Beyond the usual
...
test features, Focus+ has 24 transmit channels and 24 receive channels, with an additional on-board switching capabilities. The instrument's frequency range is 10–300 kHz.
>

Silverwing RMS PA - Phased-array corrosion mapping

Eddyfi Technologies integrated two market leading solutions, Silverwing’s RMS and M2M’s instru
...
ments to provide a high-speed, remote access ultrasonic phased-array inspection system with live total focusing method (TFM).
>

Wireless TOFD scanner

Quick, accurate and highly reproducible welds testing. The System operates wirelessly and is compat
...
ible with any type of Windows based Laptop, Desktop or Tablet.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window