where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
1017 views
Technical Discussions
David Baum
David Baum
09:21 Jun-23-2000
Thin Gauge Steel Tubes

I am looking for a reliable way to UT thin gauge, under 5/16", steel tube that has a circumferential joint joined utilizing a backing bar.


 
 Reply 
 
Tom Nelligan
Engineering,
retired, USA, Joined Nov 1998, 390

Tom Nelligan

Engineering,
retired,
USA,
Joined Nov 1998
390
09:30 Jun-23-2000
Re: Thin Gauge Steel Tubes
: I am looking for a reliable way to UT thin gauge, under 5/16", steel tube that has a circumferential joint joined utilizing a backing bar.

I'm not sure I'm properly visualizing what you're doing, but if it's a brazed or welded joint, we may be able to do something with small diameter, sharply focussed immersion transducers and appropriate fixturing. The tube diameter itself is not a problem. If it's just mechanically clamped, on the other hand, it's not a good application for ultrasonic flaw detection.

I'd be happy to look at a drawing if you can send one.

--Tom Nelligan
Panametrics, Inc.




 
 Reply 
 
Joseph Pascente
Engineering
Lixi, Inc., USA, Joined Nov 1998, 39

Joseph Pascente

Engineering
Lixi, Inc.,
USA,
Joined Nov 1998
39
07:02 Jun-25-2000
Re: Thin Gauge Steel Tubes
Dear Tom,

Go to www.lixi.com and then to Profiler. This non
contact wall thickness gauge will measure the wall
thickness of thin gauge steel tubes.


Regards,

Lixi, Inc.


Joe Pascente


 
 Reply 
 
Rick Pfannenstiel
Consultant
Spin LLC, USA, Joined Jun 2000, 1

Rick Pfannenstiel

Consultant
Spin LLC,
USA,
Joined Jun 2000
1
04:14 Jun-29-2000
Re: Thin Gauge Steel Tubes
We have been inspecting buttwelds in .056"T by 1.0" diameter buttwelds in inconnel tubing with great success using FAST ultrasonics. The backing ring should not be a problem. Not sure that this application is close to what you are doing. If you would like more information please email me.


 
 Reply 
 
Alexander Tsankov
Alexander Tsankov
01:17 Aug-03-2000
Carbon Steel Tubes
Dear Sirs,
I am interested in Carbon Steel Tubes with diameter 40-48mm. If you can help me please send me Reply on my e-mail: powercom@netbg.com.

Sincerelly Yours
A. Tsankov


 
 Reply 
 

Product Spotlight

NDT Master Lecturer

In the program both university professors and practitioners will give lectures, which guarantees the
...
oretical depth and practical inside. Academic Director: Prof. Dr. Christian Boller
The following lecturers are not complete: Prof. Tadeusz Stepinski, Prof. Wieslaw Staszewski, Prof. Frank Walther, Prof. Giovanni Bruno, Prof. Gerd Dobmann, Prof. Philippe Guy
>

Compact NDT inspection-heads for measurements with active thermography

The compact inspection head is suitable for thermographic ndt tasks. The uncooled infrared camera
...
is specially developed for NDI-tasks and offers a thermal sensitivity until now known only from thermal imagers with cooled detector. All required components and functions are integrated into the inspection-head. You will only need an ethernet cable to connect the sensor with the evaluation system.
>

HARDNESS TESTER TKM-459CE combi

TKM-459CE combi applies 2 methods of hardness control: UCI and Leeb. It provides high-accuracy tes
...
ting of metals and alloys as well as items of different sizes and configurations, their hardened layers and galvanic coatings. Device represents results in HB, HRC, HV and others. Shock-, dust- and water-proof housing with intuitive software make this gauge easy to use in all working conditions.
>

Aerospace Systems - Automated Ultrasonic Inspection

USL are specialists in the design and manufacture of turnkey ultrasonic inspection systems for aer
...
ospace applications. From monolithic composites to complex honeycomb structures. This video shows just a few examples of what is possible, find out more at: www.ultrasonic-sciences.co.uk
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window