where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

Controle Mesure Systemes
Contrôle Mesure Systèmes (CMS) is a leader in Non Destructive Testing (NDT) with a complete range of products for eddy current and ultrasonic i ...
1141 views
Technical Discussions
Marius Iulian Dinu
NDT Inspector, Pre-service and In-Service Inspections
General Electric - Life Extension Services, Romania, Joined Oct 1999, 5

Marius Iulian Dinu

NDT Inspector, Pre-service and In-Service Inspections
General Electric - Life Extension Services,
Romania,
Joined Oct 1999
5
09:07 Jul-04-2000
Volumetric Inspection of the Relief Valve Spring

Dear coleagues:

Does anybody knows which is the best method in order to inspect volumetrically (not surface or sub-surface inspection) the relief valve springs?

Here are some aditional informations:

- Spring diameter: between 50 and 120 mm.
- length of the spring: between 150 and 280 mm.
- spring wire diameter: between 8 and 30 mm.

I am looking for the detection of fatigue cracking.

Are there any possibilities to perform the inspection during in-service?

Thank you in advance for your cooperation.


Marius Iulian DINU
NDT Engineer
Cernavoda 1 N.P.P.


 
 Reply 
 
Godfrey Hands
Consultant,
PRI Nadcap, United Kingdom, Joined Nov 1998, 305

Godfrey Hands

Consultant,
PRI Nadcap,
United Kingdom,
Joined Nov 1998
305
08:30 Jul-05-2000
Re: Volumetric Inspection of the Relief Valve Spring
our web pages. This is at
www.hands-ndt.co.uk




 
 Reply 
 
Dave Utrata
R & D,
Center for NDE, Iowa State University, USA, Joined Feb 2000, 37

Dave Utrata

R & D,
Center for NDE, Iowa State University,
USA,
Joined Feb 2000
37
06:17 Jul-05-2000
Re: Volumetric Inspection of the Relief Valve Spring
: I am looking for the detection of fatigue cracking.

Hello,
Resonant inspection, as mentioned in the previous posting, would seem a very suitable candidate for such testing. If... the facts of the inspection challenge are as you state them.
In my perspective, I read your statement as relating volumetric flaws to fatigue cracking. Surely you mean cracking that eminates from previously existant internal flaws? The problem doesn't seem quite intuitive to me, even though you have made a strong attempt to relate some specifics of the case. Sounds almost like you've got production quality issues to deal with instead of 'true' service degredation.
Perhaps it would be helpful if you make any case histories of such failures available (via posting a suitable link) so we could have a closer look at your challenge. Seems a little contradictory to me, given the facts so far, or at least my reading of them.

Regards,
Dave Utrata
CNDE, Iowa State Univ.


 
 Reply 
 

Product Spotlight

EKOSCAN Phased Array

In order to always fit your needs, EKOSCAN can manufacture any type of UT transducer, either convent
...
ional or Phased Array. As an ISO 9001: 2015 certified company, EKOSCAN is extremely careful as far a material selection and manufacturing processes are concerned. Our probes guarantee our customers the benefits of latest innovations regarding piezo-composite, backing, impedance adaptation layer, etc. Specific probes for hostile environment: high temperature, high pressure, corrosive environment,etc. Specific probes designed to fit your specific application: optimization of every parameter to guarantee you the best detection.
>

AIS229 - Multipurpose Real Time System

Latest standard & automatic real time system developed by Balteau. The AIS229 has been designed to
...
do series inspection in a wide variety of industry. Composed of a shielded cabinet, 5 axis manipulator, x-ray generator and tubehead from 160kV to 225kV, a fl at panel & much more, the AIS229 is most certainly one of the most multipurpose RTR system available on the market.
>

OmniScan™ X3 flaw detector

The OmniScan X3 flaw detector is a complete phased array toolbox. Powerful tools, like total focus
...
ing method (TFM) images and advanced visualization capabilities, enable you to complete your inspection with greater confidence.
>

IRIS 9000Plus - Introducing the next generation of heat exchanger inspection.

Representing the seventh generation of the IRIS system, the IRIS 9000 Plus has nearly 200 years of c
...
ombined field inspection experience incorporated in its design. This experience combined with a strong commitment to quality and a history of innovation has made Iris Inspection Services® the undisputed leader in IRIS technology.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window