where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

651 views
Technical Discussions
jairo sanchez
jairo sanchez
05:37 Sep-20-1999
ardrox et equipment

we have an eddy current equipment from ARDROX company. rigth now the equiment is not working properly and we need the probe for non/ferritic alloys.

the company AEROTURBO is from Colombia, we work in the aeronautical field.

if any body nows the adress or the representative of this company ARDROX, for south america or in the USA?


 
 Reply 
 
Jamie Gauthier
Jamie Gauthier
06:26 May-26-2000
Re: ardrox et equipment
You can have any Ardrox equipment serviced by Gould-Bass in the USA. The web page is www.gould-bass.com.
Their Phone number is 909-623-6793.

We have our equipment calibrated there.


 
 Reply 
 
Agus Sunandar
Agus Sunandar
00:34 Jul-18-2000
Re: ardrox et equipment
: You can have any Ardrox equipment serviced by Gould-Bass in the USA. The web page is www.gould-bass.com.
: Their Phone number is 909-623-6793.

: We have our equipment calibrated there.




 
 Reply 
 

Product Spotlight

Cygnus 6+ PRO Multi-Mode Ultrasonic Thickness Gauge

The Cygnus 6+ PRO thickness gauge is the most advance gauge within the Cygnus range with key featu
...
res including: comprehensive data logging; A-scan and B-scan display; manual gain control; Bluetooth connectivity; and much more. With its unique dual display and three measuring modes (Multiple-Echo, Echo-Echo and Single-Echo), this surface thickness gauge offers maximum versatility for inspections.
>

Immersion systems

ScanMaster ultrasonic immersion systems are designed for high throughput, multi shift operation in a
...
n industrial or lab environment. These fully integrated systems provide various scanning configurations and incorporate conventional and phased arrays technologies to support diverse applications, such as inspection of disks, bars, shafts, billets and plates. All of ScanMaster immersion systems are built from high accuracy scanning frames allowing for scanning of complex parts and include a multi-channel ultrasonic instrument with exceptional performance. The systems are approved by all major manufacturers for C-scan inspection of jet engine forged discs. Together with a comprehensive set of software modules these flexible series of systems provide the customer with the best price performance solutions.
>

Combination of Digital Image Correlation and Thermographic Measurements

The combination of measuring results from the digital image correlation (ARAMIS, DIC) and temperat
...
ure measuring data from infrared cameras permits the simultaneous analysis of the thermal and mechanical behavior of test specimens in the materials and components testing field.
>

HARDNESS TESTER TKM-459CE combi

TKM-459CE combi applies 2 methods of hardness control: UCI and Leeb. It provides high-accuracy tes
...
ting of metals and alloys as well as items of different sizes and configurations, their hardened layers and galvanic coatings. Device represents results in HB, HRC, HV and others. Shock-, dust- and water-proof housing with intuitive software make this gauge easy to use in all working conditions.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window