where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

NDTSS - Non Destructive Testing Society of Singapore
Visit us at SINCE 2019
985 views
Technical Discussions
Amedeo Marino
Amedeo Marino
00:35 Jul-21-2000
11,650 mm tube inspection

We have been asked to perform a test of tubes of 11,650 mm (0,4") diameters.
Has anyone experienced this kind of test with IRIS and/or RFT ?
Do so small probes exist ?

Thank you.


 
 Reply 
 
Joseph Pascente
Engineering
Lixi, Inc., USA, Joined Nov 1998, 39

Joseph Pascente

Engineering
Lixi, Inc.,
USA,
Joined Nov 1998
39
03:31 Jul-21-2000
11.650 mm tube inspection
Dear Amedeo,

The Lixi Profiler can measure the total wall thickness of tubes whose diameter is less than 1mm. Your request was for tubing 11,650mm which mean 11.650mm. Sorry that I am not use to using a comma instead of a period.


Regards,

Joe Pascente


 
 Reply 
 
Frederick Beck
Frederick Beck
07:16 Jul-21-2000
Re: 11.650 mm tube inspection

: Dear Amedeo,

: The Lixi Profiler can measure the total wall thickness of tubes whose diameter is less than 1mm. Your request was for tubing 11,650mm which mean 11.650mm. Sorry that I am not use to using a comma instead of a period.

:
: Regards,

: Joe Pascente

Tac Technical Instrument corp in Trenton, NJ USA specializes in ultrasonic tubing inspection systems. There are a number of transducers suitable for inspection of tubes with the diameter and wall thickness you mention. Please contact us for more information



 
 Reply 
 
Andre van Vuuren
Andre van Vuuren
01:19 Jul-21-2000
Re: 11,650 mm tube inspection
No info on wall thickness or tube material?
There is a micro turbine available for the IRIS System. This can inspect tubing down to +/- 8.5mm internal ID. Used with great results with the TC5700. The smallest RFT probe we use is a 10.5MM probe available from RDtech.


 
 Reply 
 
James Doyle
James Doyle
02:05 Jul-21-2000
Re: 11,650 mm tube inspection
: We have been asked to perform a test of tubes of 11,650 mm (0,4") diameters.
: Has anyone experienced this kind of test with IRIS and/or RFT ?
: Do so small probes exist ?

: Thank you.

We have developed a laser-based tube inspection system that will operate in tubes to about 6.5 mm ID (0.260-ich)
The probe operates in straight tubes and the software generates a nice cross-sectional and "C"-scan image. You can check it out at www.visualogic.com

Jim Doyle


 
 Reply 
 
Wieslaw Bicz
Wieslaw Bicz
05:47 Jul-22-2000
Re: 11,650 mm tube inspection
: We have been asked to perform a test of tubes of 11,650 mm (0,4") diameters.
: Has anyone experienced this kind of test with IRIS and/or RFT ?
: Do so small probes exist ?

: Thank you.

We can make ultrasonic probes with about 3mm diameter and very short pulse (about 50ns long, 20MHz medium frequency).

It is also possible to make such probes with transducer radiating in 90 degrees to the axe of the probe. You can find more information about our transducer on the following site:
http://www.optel.com.pl/manual/english/transd.htm

Wieslaw Bicz

Optel sp. z o.o.



 
 Reply 
 
Ingo Becker
Engineering, NDT Inspector & Sales
ec-works GmbH, Germany, Joined Apr 2000, 30

Ingo Becker

Engineering, NDT Inspector & Sales
ec-works GmbH,
Germany,
Joined Apr 2000
30
02:47 Jul-25-2000
Re: 11,650 mm tube inspection
Hello Amadeo,

why not testing the tubes (how many?) with eddy current technology? The diameter of 11.65 mm (inside/outside?) is not a problem, we have even smaller probes in stock. Please tell us something about the tube material, metal? Which?

For further information contact us or visit our exhibition or homepage www.deltatest.de

regards


ingo becker


 
 Reply 
 

Product Spotlight

Teletest Focus+

Teletest Focus+ electronics have superior capabilities than rivals on the market. Beyond the usual
...
test features, Focus+ has 24 transmit channels and 24 receive channels, with an additional on-board switching capabilities. The instrument's frequency range is 10–300 kHz.
>

NOVO Armor 15 & NOVO Armor 22

The Armor Kit Contains the NOVO Armor, which provides additional mechanical protection to the NOVO 1
...
5WN & NOVO 22WN Detectors, the Armor Stand and a traveling soft cover. - Newest shock absorbent technology case - Water resistant design - Supports wired & wireless communication - Multiple positioning options - Tripod connection using the Built-in 1/4” threads - Simple Detector battery replacement
>

NovaScope 6000

The all-digital Novascope 6000 is a portable, ultra-high precision thickness gauge for high-speed
...
thickness measurement. Novascope 6000 has unmatched capabilities and unique features including: •Superior Resolution with high contrast, high-speed color RF display •High pulser voltage •Real-time video output •Increased internal/external data storage •Programmable SetUp features •Battery & AC Powered
>

Echomac® Small

Available with up to eight channels of electronics to detect and evaluate thickness, flaws and eccen
...
tricity, this UT tester is housed in a convenient, smaller cabinet. This instrument can be used in conjunction with bubbler or immersion tank systems, or with a test bench or in laboratory applications. The Echomac® Small is available in the FD4, FD6 or FD6A versions.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window