where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

1038 views
Technical Discussions
Amedeo Marino
Amedeo Marino
00:35 Jul-21-2000
11,650 mm tube inspection

We have been asked to perform a test of tubes of 11,650 mm (0,4") diameters.
Has anyone experienced this kind of test with IRIS and/or RFT ?
Do so small probes exist ?

Thank you.


 
 Reply 
 
Joseph Pascente
Engineering
Lixi, Inc., USA, Joined Nov 1998, 39

Joseph Pascente

Engineering
Lixi, Inc.,
USA,
Joined Nov 1998
39
03:31 Jul-21-2000
11.650 mm tube inspection
Dear Amedeo,

The Lixi Profiler can measure the total wall thickness of tubes whose diameter is less than 1mm. Your request was for tubing 11,650mm which mean 11.650mm. Sorry that I am not use to using a comma instead of a period.


Regards,

Joe Pascente


 
 Reply 
 
Frederick Beck
Frederick Beck
07:16 Jul-21-2000
Re: 11.650 mm tube inspection

: Dear Amedeo,

: The Lixi Profiler can measure the total wall thickness of tubes whose diameter is less than 1mm. Your request was for tubing 11,650mm which mean 11.650mm. Sorry that I am not use to using a comma instead of a period.

:
: Regards,

: Joe Pascente

Tac Technical Instrument corp in Trenton, NJ USA specializes in ultrasonic tubing inspection systems. There are a number of transducers suitable for inspection of tubes with the diameter and wall thickness you mention. Please contact us for more information



 
 Reply 
 
Andre van Vuuren
Andre van Vuuren
01:19 Jul-21-2000
Re: 11,650 mm tube inspection
No info on wall thickness or tube material?
There is a micro turbine available for the IRIS System. This can inspect tubing down to +/- 8.5mm internal ID. Used with great results with the TC5700. The smallest RFT probe we use is a 10.5MM probe available from RDtech.


 
 Reply 
 
James Doyle
James Doyle
02:05 Jul-21-2000
Re: 11,650 mm tube inspection
: We have been asked to perform a test of tubes of 11,650 mm (0,4") diameters.
: Has anyone experienced this kind of test with IRIS and/or RFT ?
: Do so small probes exist ?

: Thank you.

We have developed a laser-based tube inspection system that will operate in tubes to about 6.5 mm ID (0.260-ich)
The probe operates in straight tubes and the software generates a nice cross-sectional and "C"-scan image. You can check it out at www.visualogic.com

Jim Doyle


 
 Reply 
 
Wieslaw Bicz
Engineering,
PBP Optel sp. z o.o., Poland, Joined Feb 2009, 276

Wieslaw Bicz

Engineering,
PBP Optel sp. z o.o.,
Poland,
Joined Feb 2009
276
05:47 Jul-22-2000
Re: 11,650 mm tube inspection
: We have been asked to perform a test of tubes of 11,650 mm (0,4") diameters.
: Has anyone experienced this kind of test with IRIS and/or RFT ?
: Do so small probes exist ?

: Thank you.

We can make ultrasonic probes with about 3mm diameter and very short pulse (about 50ns long, 20MHz medium frequency).

It is also possible to make such probes with transducer radiating in 90 degrees to the axe of the probe. You can find more information about our transducer on the following site:
http://www.optel.com.pl/manual/english/transd.htm

Wieslaw Bicz

Optel sp. z o.o.



 
 Reply 
 
Ingo Becker
Engineering, NDT Inspector & Sales
ec-works GmbH, Germany, Joined Apr 2000, 31

Ingo Becker

Engineering, NDT Inspector & Sales
ec-works GmbH,
Germany,
Joined Apr 2000
31
02:47 Jul-25-2000
Re: 11,650 mm tube inspection
Hello Amadeo,

why not testing the tubes (how many?) with eddy current technology? The diameter of 11.65 mm (inside/outside?) is not a problem, we have even smaller probes in stock. Please tell us something about the tube material, metal? Which?

For further information contact us or visit our exhibition or homepage www.deltatest.de

regards


ingo becker


 
 Reply 
 

Product Spotlight

MANTIS

MANTIS is a compact, powerful and affordable flaw detector (16:64PR), dedicated to field operators
...
. This portable equipment offers standard (electronic-, sector-, compound scan, conventional UT for pulse-echo, dual array and TOFD inspections), and advanced phased-array (real-time TFM -Total Focusing Method). MANTIS benefits from the same intuitive and user-friendly interface (CAPTURE) than Gekko for easier inspections.
>

Robotic laser shearography enables 100% inspection of complex, flight-critical composite structures

An article in “Composites World Magazine” showcases Non Destructive Testing of aero-structures
...
with Laser Shearography. Over the years Dantec Dynamics has supplied many solutions for the aerospace industry. Referring to specific customer projects several of these cases are examined to outline the advantages of using Laser Shearography for automated defect detection.
>

ISONIC 3510

Very Powerful Superior Performance Extremely Portable Smart Phased Array Ultrasonic Flaw Detector an
...
d Recorder with 2 Conventional UT and TOFD Channels uniquely combines PA, single- and multi-channel conventional UT, and TOFD modalities providing 100% raw data recording and imaging. Suitable for all kinds of every-day ultrasonic inspections
>

NEW - TD Focus-ScanRX

The NEW Next Generation Advanced UT platform, TD Focus ScanRX - Also available as a card stack solut
...
ion. Key Improvements 1. Data acquisition is significantly faster than current design 2. Better aesthetic – closely aligns with HandyScan RX 3. Improved IP rating (Target IP66) 4. Ruggedized housing 5. Connectors are protected from impact and ingress 6. Integrated stand and separate retractable handle easy to keep clean) 7. Touchscreen with ruggedized display glass 8. 3-Axis encoder input
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window