where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

622 views
Technical Discussions
Godfrey Hands
Consultant,
PRI Nadcap, United Kingdom, Joined Nov 1998, 307

Godfrey Hands

Consultant,
PRI Nadcap,
United Kingdom,
Joined Nov 1998
307
04:32 Jul-31-2000
General NDT Questions

Hallo Everybody,
I have become somewhat concerned about the number of questions being asked about basics of different NDT techniques.
If a person needs to know these things due to his professional position, but does not know them, then he is not suitably qualified for the position that he is holding.

There are many training courses to Level I, II and III throughout the world. Many of the questions asked should have been answerable by at least a Level I, or else a Level II, but to have to know this means that the person appears to be holding a position equivalent to Level III.

Please look at available training course, else but some basic books on the subject.

Godfrey Hands


 
 Reply 
 
Rolf Diederichs
Director,
NDT.net, Germany, Joined Nov 1998, 617

Rolf Diederichs

Director,
NDT.net,
Germany,
Joined Nov 1998
617
05:40 Jul-31-2000
Re: General NDT Questions
d cannot control forum discussions (besides blatant ads).
Also I cannot avoid that many companies with advertising budgets do not go
to the NDT.net exhibition instead doing their marketing in the forum.

Kind Regards

Rolf


: Hallo Everybody,
: I have become somewhat concerned about the number of questions being asked about basics of different NDT techniques.
: If a person needs to know these things due to his professional position, but does not know them, then he is not suitably qualified for the position that he is holding.

: There are many training courses to Level I, II and III throughout the world. Many of the questions asked should have been answerable by at least a Level I, or else a Level II, but to have to know this means that the person appears to be holding a position equivalent to Level III.

: Please look at available training course, else but some basic books on the subject.

: Godfrey Hands




 
 Reply 
 

Product Spotlight

High-performance Linear Phased Array Probes

Available to order from stock in a range of 5MHz – 7.5MHz and from 16 to 64 elements. Designed w
...
ith piezo-composite elements, Phoenix phased array probes provide high-resolution imaging to maximise sensitivity; accurate ultrasonic detection and sizing of defects in welds; and effective corrosion mapping. Housed in a rugged stainless steel case for on-site industrial NDT applications.
>

Scatter Correction for Industrial Cone-Beam Computed Tomography (CBCT)

Download our white paper on Scatter Correction for Industrial Cone-Beam Computed Tomography (CBCT)
...
Using 3D VSHARP, a fast GPU-Based Linear Boltzmann Transport Equation Solver here: http://bit.ly/2Y0t78P
>

NDTkit RT

NDTkit RT, TESTIA's Digital Radiography software The NDTkit product line software for X-ray analysi
...
s. NDTkit RT is a software benefiting from the Ultis kernel which is dedicated to radiographic image analysis. It offers a set of tools and filtering processes to assist RT operators in finding relevant flaws.
>

On Demand Webinar: Improve the Efficiency and Accuracy of Inspection Scanning

On-demand webinar on scanning technology that helps improve the efficiency and accuracy of ultrasoni
...
c inspections in oil and gas, aerospace, manufacturing and other industrial applications. The webinar features a scanning solution for multiple inspection environments, including flat and curved specimens, magnetic and nonmagnetic surfaces and raster scanning over long distances. View it today.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window