where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

451 views
Technical Discussions
Dr.Khazali Zin
Researcher
SIRIM BERHAD, Malaysia, Joined Nov 1998, 3

Dr.Khazali Zin

Researcher
SIRIM BERHAD,
Malaysia,
Joined Nov 1998
3
06:19 Jul-29-2000
attenuation measurement for HIC

When measuring attenuation due to the suspected HIC,can anyone provide me acceptance and rejection criteria
based on the value of this attenuation? This is in order to assist our clients to do preventive measures
to theirs components.
Thank you.


 
 Reply 
 
Jairo Humberto Guzman
NDT Inspector, NDT researcher
Ecopetrol ICP, Colombia, Joined Nov 1998, 6

Jairo Humberto Guzman

NDT Inspector, NDT researcher
Ecopetrol ICP,
Colombia,
Joined Nov 1998
6
05:50 Jul-31-2000
Re: attenuation measurement for HIC
: When measuring attenuation due to the suspected HIC,can anyone provide me acceptance and rejection criteria
: based on the value of this attenuation? This is in order to assist our clients to do preventive measures
: to theirs components.
: Thank you.
Dr.Khazali Zin We have made some HIC inspecitions and we use 4Th eco to measurement the atenuation. we calibrate the 4Th eco to 80% of the screnn and the aceptance criteria is:
signals less than 20% of the screen have to be reyected.
Complementary you have to measuremet The backscater eco and velicities ratio.
The three methodes will give you the % of damage

good luck




 
 Reply 
 

Product Spotlight

FD800 Bench Top Flaw Detectors

The bench-top FD800 flaw detector range combines state-of-the-art flaw detection with advanced mater
...
ial thickness capabilities. Designed for use in the laboratory these gauges are the tool you need for all your flaw detecting needs.
>

Extended Range Variable Wall® Piping Calibration Blocks for Longseam Inspection

This set of two blocks has been specially designed for situations where ultrasonic examination tak
...
es place circumferentially or “around the curve” for applications such as inspection of longseam welds in piping and vessels. Jointly designed by PH Tool and Holloway NDT, the blocks feature side-drilled hole reflectors positioned within novel compound-curves, each with multiple thickness steps. The unique design results in a light and compact form factor, with the largest block weighing just over 15 lbs and spanning just 16 ¾”. Coverage is provided for nominal pipe sizes from 6” to 10” in the small block and 12” to a whopping 56” in the large block. The compound OD curves and multiple wall thicknesses actually exceed ASME requirements, providing exceptional signal response and measurement accuracy. Properly managing beam divergence off the ID and stabilizing beam skew due to probe rocking is essential to maintaining a consistent calibration when inspecting lengthwise on curved surfaces.
>

OPBOX with standard software is able to do all types of inspections and measurements: flaw detection in welds and materials, scanning of objects, testing composite materials, forged and moulded pieces, many UT inspections, measurements of properties of ma

Typical applications: UT measurements with pulse technique, Measurement of thicknesses also at hig
...
h temperatures, Measurements of properties of materials, including fluids and gases We are delivering a standard version of the software (for any Microsoft Windows up to 10 x64 with Microsoft Hardware certification report Approved) and for special needs: SDK with ready to use examples for LabView, MATLAB x64, C++ wrapper for dll, Python and Linux., and also low-level description of how to control our devices directly from any USB tools
>

IRIS 9000Plus - Introducing the next generation of heat exchanger inspection.

Representing the seventh generation of the IRIS system, the IRIS 9000 Plus has nearly 200 years of c
...
ombined field inspection experience incorporated in its design. This experience combined with a strong commitment to quality and a history of innovation has made Iris Inspection Services® the undisputed leader in IRIS technology.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window