where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

GB Inspection Systems Ltd.
A leading UK manufacturer of Ultrasonic Probes, Accessories, Supplier of NDT Equipment and more.
1116 views
Career Discussions
ian pearson
ian pearson
08:53 Feb-05-2003
where to begin in ut

I have just enrolled in a ut level 1 course however I have no previous experience in the field,how difficult or easy will it be to pickup bearing in mind that its only 5 days!there is a weeks intro course,would that prepare me or is it a waste of time.


 
 Reply 
 
Timothy MacInnis
Senior NDT Engineer
SAIC/Ultra Iamge International, USA, Joined Dec 1999, 10

Timothy MacInnis

Senior NDT Engineer
SAIC/Ultra Iamge International,
USA,
Joined Dec 1999
10
09:11 Feb-05-2003
Re: where to begin in ut
Education should never be taken lightly.
There are a variety of on-line education sights that will provide you with a good intro.
This link will take you to the CNDE site. http://www.cnde.iastate.edu/.
Be advised in all educational programs you will only get out as much as you put in.



 
 Reply 
 
Terry White
Terry White
09:20 Feb-05-2003
Re: where to begin in ut
: I have just enrolled in a ut level 1 course however I have no previous experience in the field,how difficult or easy will it be to pickup bearing in mind that its only 5 days!there is a weeks intro course,would that prepare me or is it a waste of time.
.Relax, Ian. I did the same thing 20 years ago.Relax, Ian. I took a 5 day level 1 class in UT 20 years ago from Krautkramer and I did just fine with no prior experience. Provided that you have good instructors and training materials, you should do just fine. The level 1 course is an introductory class and you'll learn a lot. Lot's of math involved so if you're strong in that area, it's a bonus.



 
 Reply 
 
Neil Burleigh
Sales
Krautkramer Australia Pty Ltd, Australia, Joined Dec 2002, 158

Neil Burleigh

Sales
Krautkramer Australia Pty Ltd,
Australia,
Joined Dec 2002
158
03:46 Feb-05-2003
Re: where to begin in ut
: I have just enrolled in a ut level 1 course however I have no previous experience in the field,how difficult or easy will it be to pickup bearing in mind that its only 5 days!there is a weeks intro course,would that prepare me or is it a waste of time.
.
Ian,
We are running a Level 1 UT training course next month in Sydney Australia. If you go to the Krautkramer website there is a booklet you can download, "Non destructive Testing of Materials - Introduction to Basics" It is a 40 odd page booklet and we find it very helpful for the students.

Regards
Neil Burleigh


 
 Reply 
 
Dave Davies
Dave Davies
02:39 Feb-06-2003
Re: where to begin in ut
: I have just enrolled in a ut level 1 course however I have no previous experience in the field,how difficult or easy will it be to pickup bearing in mind that its only 5 days!there is a weeks intro course,would that prepare me or is it a waste of time.

Ian, Training is never wasted, but UT is a skill and nothing beats hands on experience. I started in the mid 60's and learnt most of my trade on the job. I have not stopped learning, there is always something new.
Stick at it, work on the probe, ask questions and read up on the subject. Study what you are testing as this helps greatly. Don't be afraid to ask, any operator thats worth anything will help you.
The best advice I can give is not always to believe your first impression, you are looking at a three dimensional object with a two dimensional, indirect display. If you can find a way to verify your interpretation, whether it's by using a different angle or just looking at the area in question (e.g. the reverse side of the test object, if accessible).
Stick to it, UT still gives me a buzz and there is always something to learn. Products, materials and equipment evolve and you have to evolve with them.
Good Luck and don't give up, there is great satisfaction in beating a problem.
Dave
.



 
 Reply 
 
Nigel Armstrong
Engineering, - Specialist services
United Kingdom, Joined Oct 2000, 1096

Nigel Armstrong

Engineering, - Specialist services
United Kingdom,
Joined Oct 2000
1096
01:01 Feb-07-2003
Re: where to begin in ut
Ian, Good luck in your new venture (and remember, nothing ventured, nothing gained). I think that there are 3 areas where a bit of previous study prior to attendance on the course will help. If you are confident in these areas then you will be able to concentrate solely on the ultrasonic principles.

1. Very basic trigonometric functions, what i call the SOHCAHTOA memory-aid (if you dont know ask anyone reasonably proficent in maths). From this you'll be able to work out where those indications on your screen are coming from

2. Scientific notation, i.e. instead of 5000000 write 5x10 exp 6. This notation appears on most calculators and helps achieve the right answer when mixing very large and very small numbers (again ask the person in 1 above for help)

3. Manipulation of simple equations such as velocity = wavelength x frequency. You'll use this and a few other equations over the years to help select the right probe for the job.

Be confident in these 3 areas and you'll be able to concentrate fully onUT principles in that first week without struggling with fairly simple maths. And ask, ask, ask questions plus study at night so you can ask even more questions! My apologies if you are already proficient in these areas, i hope this might be of interest to others.

I'm working in the field of auto-ut (AUT) at present and there are plenty of guys working as operators with no prior ut experience so there is always an opening for you.



 
 Reply 
 

Product Spotlight

Ultrasonic Squirter/Gantry System

TecScan’s NDT Ultrasonic Gantry Systems are industrial Squirter scanners designed for non-destru
...
ctive quality testing and raster scanning of large structures and parts. The Gantry Systems are usually composed of an Industrial Mechanical Scanner and a Control Room with System Workstation.
>

Sci Aps Z-Series Portable Handheld Analysers

The world’s only handheld analyzer that measures carbon content in stainless (yes even L-grades),s
...
teels, and cast irons. Also accepted for low Si analysis for sulfidic corrosion analysis, and is widely used in the power industry for Cr analysis, for flow accelerated corrosion applications.
>

Navic - Steerable Modular Automated Scanner

The Navic is a modular, motorized, steerable scanner designed to carry multiple attachments used
...
in various scanning and inspection applications. The Navic is capable of weld scanning (girth welds and long seam welds), automated corrosion mapping, and tank scanning.
>

MIZ®-21C: Truly Affordable Eddy Current Handheld with Surface Array Capability

Introducing MIZ-21C, the first truly affordable handheld eddy current instrument with surface array
...
capabilities. MIZ-21C can deliver fast, accurate inspections in demanding NDT applications including aerospace, oil and gas, manufacturing, and power generation. The surface array solution can reduce inspection time by up to 95% compared to traditional handheld pencil probes. The ergonomic design, long battery life, and intuitive touchscreen mean you can inspect more areas faster than ever without fatigue.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window