where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

453 views
Career Discussions
Kavita
Kavita
06:23 Apr-16-2003
Acoustic emission

I'm going throu one of the papers on acoustic emission and there it was mentioned that hydrophone system is hypothesized to be better than AE system. I was under impression that both of these sytems are same..as hydrophones are the main components of AE system. Can anybody clear my confusion.
Thanks in advance
Kavitha.


 
 Reply 
 
John O'Brien
Consultant, -
Chevron ETC , USA, Joined Jan 2000, 280

John O'Brien

Consultant, -
Chevron ETC ,
USA,
Joined Jan 2000
280
08:41 Apr-19-2003
Re: Acoustic emission
It may be a case of misapplication of a word. Yes hydrophones are used in the AE Spectrum and the usual 'rule of thumb' distinction is probably whether the AE source is transmitted by liquid or airborne. In these cases the term 'hydrophone' is often used even through not strictly true. Structure borne AE sounds are usually termed sensor or even sometimes accelerometer.

If you describe the application you are reviewing people may be able to comment more specifically.


 
 Reply 
 

Product Spotlight

Robotic laser shearography enables 100% inspection of complex, flight-critical composite structures

An article in “Composites World Magazine” showcases Non Destructive Testing of aero-structures
...
with Laser Shearography. Over the years Dantec Dynamics has supplied many solutions for the aerospace industry. Referring to specific customer projects several of these cases are examined to outline the advantages of using Laser Shearography for automated defect detection.
>

NDT.net launches mobile-friendly design

NDT.net has revamped its website providing a mobile-friendly design.The front page received a comp
...
letely new design and all other sections are now reacting responsively on mobile devices. This has been a major step to make our website more user- friendly.
>

Combination of Digital Image Correlation and Thermographic Measurements

The combination of measuring results from the digital image correlation (ARAMIS, DIC) and temperat
...
ure measuring data from infrared cameras permits the simultaneous analysis of the thermal and mechanical behavior of test specimens in the materials and components testing field.
>

Scatter Correction for Industrial Cone-Beam Computed Tomography (CBCT)

Download our white paper on Scatter Correction for Industrial Cone-Beam Computed Tomography (CBCT)
...
Using 3D VSHARP, a fast GPU-Based Linear Boltzmann Transport Equation Solver here: http://bit.ly/2Y0t78P
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window