where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

VOGT Ultrasonics GmbH
non-destructive testing, services, training, ultrasonic systems, immersion and squirter inspection systems, PROline, digital radiology
646 views
Technical Discussions
perry
perry
01:26 Aug-04-2000
about austenitic steel ndt

where can I get some information about austenitic steel NDT, especially on electric generator, whose material is 50Mn18Cr4WN(18MnCr4)?
thank you for your help.


    
 
 Reply 
 
nard
nard
07:49 Aug-05-2000
Re: about austenitic steel ndt
Dear A.Delahaza
We have over 30 years experience in the examination of austenitic steel
welds . Special longitudinal angled probe have to be used to penetrate the
austenitc colonnar structure . Actually we are in Korea to train people for
the examination pressure vessels with heavy thicknesses .At the 15 World
Conference on NDT we will present a paper on this subject .
Send me you fax number , will send you material .
I&T NARDONI INSTITUTE nardoni @numerica.it Brescia Italy fax
0039 -030-2667429 .
Handy phone :
0039-348-2280470


best regards


G:NARDONI


----------
: where can I get some information about austenitic steel NDT, especially on electric generator, whose material is 50Mn18Cr4WN(18MnCr4)?
: thank you for your help.




    
 
 Reply 
 
Thomas Murphy
NDT Inspector
USA, Joined Jul 2000, 16

Thomas Murphy

NDT Inspector
USA,
Joined Jul 2000
16
07:31 Aug-07-2000
Re: about austenitic steel ndt
EPRI (Electrical Power Research Institute)
In Charlotte, South Carolina, USA has published an
exhaustive recomendation manual for this exact
application. The retaining rings are difficult to
inspect. Inspection methods are similar to those
employed during inspection of austentic piping
but are different enough that specialized training
would be recommended for a new inspector. The EPRI
report lists both the inspection possibilities (UT,
ET, PT, VT) as well as the advantages and disadvantages
of each. It also touches on the fracture mechanics,
flaw types, and methods of repair. The report number
is EPRI EL/EM-5117-SR it can also be accessed by the
topics of retaining rings, stress corrosion cracking,
nondestructive testing and in-service inspection.

Regards,
Tom

: where can I get some information about austenitic steel NDT, especially on electric generator, whose material is 50Mn18Cr4WN(18MnCr4)?
: thank you for your help.




    
 
 Reply 
 

Product Spotlight

Navic - Steerable Modular Automated Scanner

The Navic is a modular, motorized, steerable scanner designed to carry multiple attachments used
...
in various scanning and inspection applications. The Navic is capable of weld scanning (girth welds and long seam welds), automated corrosion mapping, and tank scanning.
>

ISONIC 3510

Very Powerful Superior Performance Extremely Portable Smart Phased Array Ultrasonic Flaw Detector an
...
d Recorder with 2 Conventional UT and TOFD Channels uniquely combines PA, single- and multi-channel conventional UT, and TOFD modalities providing 100% raw data recording and imaging. Suitable for all kinds of every-day ultrasonic inspections
>

FlexoFORM™

The FlexoFORM™ solution integrates flexible phased array probe technology in a scanner to solv
...
e the challenges that come with inspecting pipe elbows. When combined with a water column, this solution can be used to collect easy-to-interpret data on elbows with diameters ranging from 4.5 in. OD up to flat and offers many benefits.
>

GEKKO - Portable Phased Array Testing with TFM in Real-Time

The portable phased array testing system GEKKO provides 64 parallel test channels. On creating testi
...
ng parameters the operator is assisted by the CIVA software. Due to its modular set-up the GEKKO instrument is suitable for operators of all skill levels.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window