where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

487 views
Technical Discussions
Troy Foster - Application Engineer
Engineering, X-ray Inspection Systems
Willick Engineering Company, USA, Joined Feb 2000, 6

Troy Foster - Application Engineer

Engineering, X-ray Inspection Systems
Willick Engineering Company,
USA,
Joined Feb 2000
6
09:26 Aug-07-2000
Realtime X-ray of Sensors - Mr. Junzou Tanaka

Mr. Junzou Tanaka, Further information on real-time x-ray apparatus can be obtained from http://www.willick.com. E-mail contact is troy@willick.com

Looking forward to assisting you in any way possible.

Sincerely,

Troy Foster



 
 Reply 
 
Kenji Aida or Yasuyuki Sekine
Kenji Aida or Yasuyuki Sekine
02:19 Aug-09-2000
Re: Realtime X-ray of Sensors - Mr. Junzou Tanaka
YXLON Japan TEL 03-3740-5175 ,FAX03-3740-5321
ƒhƒCƒc‚̃GƒNƒXƒƒ“EƒCƒ“ƒ^[ƒiƒVƒ‡ƒiƒ‹‡Š‚Ö‚¨–â‚¢‡‚킹‚ÌŒ
ã‹L‚Ö‚²˜A—‚ð‚¨Šè‚¢‚µ‚Ü‚·B


 
 Reply 
 

Product Spotlight

MANTIS

MANTIS is a compact, powerful and affordable flaw detector (16:64PR), dedicated to field operators
...
. This portable equipment offers standard (electronic-, sector-, compound scan, conventional UT for pulse-echo, dual array and TOFD inspections), and advanced phased-array (real-time TFM -Total Focusing Method). MANTIS benefits from the same intuitive and user-friendly interface (CAPTURE) than Gekko for easier inspections.
>

TraiNDE UT

TraiNDE UT is a virtual tool associated with a signal database which simulates real inspection con
...
ditions for numerous applications (Type A/V1 block, DAC block, welds and plates).
>

Echomac® PA Tube Weld Tester

The new robotic Echomac® PA TW is an operator friendly test system for detecting weld zone defects
...
in tube and pipe caused by scarfing or welding processes. Electronic scanning ensures that the entire weld zone is covered without the need for mechanical movement or operator adjustment.
>

Research and Application Development For NDT

Acuren’s Research and Application Development specializes in the development of advanced ultraso
...
nic inspection techniques and systems for challenging inspection applications, with an emphasis on practical solutions which are field deployable. Services include manual and automated ultrasonic inspection system development, inspection technique optimization using laboratory scale studies and ultrasonic modeling (CIVA, BeamTool), preparing technical justification for technique evaluation and qualification (Probability of Detection and sizing accuracy studies), inspection/calibration/analysis procedure preparation to support field deployment of custom techniques, and development of custom imaging algorithms to support challenging inspection applications.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window