where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

903 views
Career Discussions
Jens Forker
Jens Forker
08:27 Jun-25-2004
low frequency UT probe

Dear all,
Who can help or knows a possible source?

We are looking for a UT probe with almost linear efficiency (if excited by a continuous sine wave) in the band width from (roughly) 10kHz up to 200kHz (we want to sweep the frequency across this range).
Also probes from around 10-100kHz and from 50-200kHz might be of interest.
We need a flat coupling area to couple this probe to solids.

thanks and regards
Jens


 
 Reply 
 
N.Kuppusamy
Consultant, NDT Level-III Engineer
Advanced Inspection & Testing (S) Pte Ltd, Singapore, Joined Dec 2003, 34

N.Kuppusamy

Consultant, NDT Level-III Engineer
Advanced Inspection & Testing (S) Pte Ltd,
Singapore,
Joined Dec 2003
34
04:03 Jun-26-2004
Re: low frequency UT probe
Hi,
You can contact probe manufacturers such as Krautkramer with your specific requirement. They will construct and supply to you.
N.Kuppusamy

----------- Start Original Message -----------
: Dear all,
: Who can help or knows a possible source?
: We are looking for a UT probe with almost linear efficiency (if excited by a continuous sine wave) in the band width from (roughly) 10kHz up to 200kHz (we want to sweep the frequency across this range).
: Also probes from around 10-100kHz and from 50-200kHz might be of interest.
: We need a flat coupling area to couple this probe to solids.
: thanks and regards
: Jens
------------ End Original Message ------------




 
 Reply 
 
Simon Amallraja
Simon Amallraja
07:01 Jun-30-2004
Re: low frequency UT probe
----------- Start Original Message -----------
: Dear all,
: Who can help or knows a possible source?
: We are looking for a UT probe with almost linear efficiency (if excited by a continuous sine wave) in the band width from (roughly) 10kHz up to 200kHz (we want to sweep the frequency across this range).
: Also probes from around 10-100kHz and from 50-200kHz might be of interest.
: We need a flat coupling area to couple this probe to solids.
: thanks and regards
: Jens
------------ End Original Message ------------

Dear jens,

Please contact us with more specific data to give u the quote.

Regards.

Simon Amallraja.


 
 Reply 
 
J. Dong
J. Dong
02:23 Jul-01-2004
Re: low frequency UT probe
Hi,

Physical Acoustics Corporation's S9208 sensor is pretty good for this application. It has flat response in this frequency bandwidth. I have used it as an excitation sensor for years.


----------- Start Original Message -----------
: Dear all,
: Who can help or knows a possible source?
: We are looking for a UT probe with almost linear efficiency (if excited by a continuous sine wave) in the band width from (roughly) 10kHz up to 200kHz (we want to sweep the frequency across this range).
: Also probes from around 10-100kHz and from 50-200kHz might be of interest.
: We need a flat coupling area to couple this probe to solids.
: thanks and regards
: Jens
------------ End Original Message ------------




 
 Reply 
 

Product Spotlight

HARDNESS TESTER TKM-459CE combi

TKM-459CE combi applies 2 methods of hardness control: UCI and Leeb. It provides high-accuracy tes
...
ting of metals and alloys as well as items of different sizes and configurations, their hardened layers and galvanic coatings. Device represents results in HB, HRC, HV and others. Shock-, dust- and water-proof housing with intuitive software make this gauge easy to use in all working conditions.
>

TraiNDE UT

TraiNDE UT is a virtual tool associated with a signal database which simulates real inspection con
...
ditions for numerous applications (Type A/V1 block, DAC block, welds and plates).
>

Immersion systems

ScanMaster ultrasonic immersion systems are designed for high throughput, multi shift operation in a
...
n industrial or lab environment. These fully integrated systems provide various scanning configurations and incorporate conventional and phased arrays technologies to support diverse applications, such as inspection of disks, bars, shafts, billets and plates. All of ScanMaster immersion systems are built from high accuracy scanning frames allowing for scanning of complex parts and include a multi-channel ultrasonic instrument with exceptional performance. The systems are approved by all major manufacturers for C-scan inspection of jet engine forged discs. Together with a comprehensive set of software modules these flexible series of systems provide the customer with the best price performance solutions.
>

On Demand Webinar: Using Eddy Current Array for Large Areas in Place of Magnetic Particle and Liquid Penetrant Testing

New on-demand webinar on the use of eddy current array (ECA) technology in lieu of liquid penetrant
...
testing (PT) and magnetic particle testing (MT) for large area screenings. The webinar includes an introduction to the technologies with advantages and disadvantages of each. Side by side examples are discussed including aircraft stringers, engine blades, forgings, weld plates & more. View it today.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window