where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

ULTRASOUND INSTITUTE
The Ultrasound Institute can develop new advanced ultrasonic measurement, imaging and NDT techniques for non-conventional applications.

901 views
Career Discussions
Jens Forker
Jens Forker
08:27 Jun-25-2004
low frequency UT probe

Dear all,
Who can help or knows a possible source?

We are looking for a UT probe with almost linear efficiency (if excited by a continuous sine wave) in the band width from (roughly) 10kHz up to 200kHz (we want to sweep the frequency across this range).
Also probes from around 10-100kHz and from 50-200kHz might be of interest.
We need a flat coupling area to couple this probe to solids.

thanks and regards
Jens


 
 Reply 
 
N.Kuppusamy
Consultant, NDT Level-III Engineer
Advanced Inspection & Testing (S) Pte Ltd, Singapore, Joined Dec 2003, 34

N.Kuppusamy

Consultant, NDT Level-III Engineer
Advanced Inspection & Testing (S) Pte Ltd,
Singapore,
Joined Dec 2003
34
04:03 Jun-26-2004
Re: low frequency UT probe
Hi,
You can contact probe manufacturers such as Krautkramer with your specific requirement. They will construct and supply to you.
N.Kuppusamy

----------- Start Original Message -----------
: Dear all,
: Who can help or knows a possible source?
: We are looking for a UT probe with almost linear efficiency (if excited by a continuous sine wave) in the band width from (roughly) 10kHz up to 200kHz (we want to sweep the frequency across this range).
: Also probes from around 10-100kHz and from 50-200kHz might be of interest.
: We need a flat coupling area to couple this probe to solids.
: thanks and regards
: Jens
------------ End Original Message ------------




 
 Reply 
 
Simon Amallraja
Simon Amallraja
07:01 Jun-30-2004
Re: low frequency UT probe
----------- Start Original Message -----------
: Dear all,
: Who can help or knows a possible source?
: We are looking for a UT probe with almost linear efficiency (if excited by a continuous sine wave) in the band width from (roughly) 10kHz up to 200kHz (we want to sweep the frequency across this range).
: Also probes from around 10-100kHz and from 50-200kHz might be of interest.
: We need a flat coupling area to couple this probe to solids.
: thanks and regards
: Jens
------------ End Original Message ------------

Dear jens,

Please contact us with more specific data to give u the quote.

Regards.

Simon Amallraja.


 
 Reply 
 
J. Dong
J. Dong
02:23 Jul-01-2004
Re: low frequency UT probe
Hi,

Physical Acoustics Corporation's S9208 sensor is pretty good for this application. It has flat response in this frequency bandwidth. I have used it as an excitation sensor for years.


----------- Start Original Message -----------
: Dear all,
: Who can help or knows a possible source?
: We are looking for a UT probe with almost linear efficiency (if excited by a continuous sine wave) in the band width from (roughly) 10kHz up to 200kHz (we want to sweep the frequency across this range).
: Also probes from around 10-100kHz and from 50-200kHz might be of interest.
: We need a flat coupling area to couple this probe to solids.
: thanks and regards
: Jens
------------ End Original Message ------------




 
 Reply 
 

Product Spotlight

Ultrasonic Squirter/Gantry System

TecScan’s NDT Ultrasonic Gantry Systems are industrial Squirter scanners designed for non-destru
...
ctive quality testing and raster scanning of large structures and parts. The Gantry Systems are usually composed of an Industrial Mechanical Scanner and a Control Room with System Workstation.
>

Scatter Correction for Industrial Cone-Beam Computed Tomography (CBCT)

Download our white paper on Scatter Correction for Industrial Cone-Beam Computed Tomography (CBCT)
...
Using 3D VSHARP, a fast GPU-Based Linear Boltzmann Transport Equation Solver here: http://bit.ly/2Y0t78P
>

Conformable wedge transducer

The conformability is obtained with a flexible membrane filled with water between the transducer and
...
the inspected component. The coupling between the membrane and the component requires a small quantity of water or couplant. The conformable wedge combines the acoustic performance of immersion technique with good coupling and low attenuation.
>

PAUT Probes

Typical Phased Array probes have frequencies between 1MHz and 20MHz and the number of wafers is 10
...
to 128. M2 Electronics offers customers conventionally ultrasound probes and the ability to provide high-precision Phased Array Ultrasound Probes of up to 256 wafers. We can also customize the probe for our customers to meet the specific application requirements of the user.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window