where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

Sonotron NDT
Original developer and manufacturer of advanced ultrasonic instruments

896 views
Career Discussions
Jens Forker
Jens Forker
08:27 Jun-25-2004
low frequency UT probe

Dear all,
Who can help or knows a possible source?

We are looking for a UT probe with almost linear efficiency (if excited by a continuous sine wave) in the band width from (roughly) 10kHz up to 200kHz (we want to sweep the frequency across this range).
Also probes from around 10-100kHz and from 50-200kHz might be of interest.
We need a flat coupling area to couple this probe to solids.

thanks and regards
Jens


 
 Reply 
 
N.Kuppusamy
Consultant, NDT Level-III Engineer
Advanced Inspection & Testing (S) Pte Ltd, Singapore, Joined Dec 2003, 34

N.Kuppusamy

Consultant, NDT Level-III Engineer
Advanced Inspection & Testing (S) Pte Ltd,
Singapore,
Joined Dec 2003
34
04:03 Jun-26-2004
Re: low frequency UT probe
Hi,
You can contact probe manufacturers such as Krautkramer with your specific requirement. They will construct and supply to you.
N.Kuppusamy

----------- Start Original Message -----------
: Dear all,
: Who can help or knows a possible source?
: We are looking for a UT probe with almost linear efficiency (if excited by a continuous sine wave) in the band width from (roughly) 10kHz up to 200kHz (we want to sweep the frequency across this range).
: Also probes from around 10-100kHz and from 50-200kHz might be of interest.
: We need a flat coupling area to couple this probe to solids.
: thanks and regards
: Jens
------------ End Original Message ------------




 
 Reply 
 
Simon Amallraja
Simon Amallraja
07:01 Jun-30-2004
Re: low frequency UT probe
----------- Start Original Message -----------
: Dear all,
: Who can help or knows a possible source?
: We are looking for a UT probe with almost linear efficiency (if excited by a continuous sine wave) in the band width from (roughly) 10kHz up to 200kHz (we want to sweep the frequency across this range).
: Also probes from around 10-100kHz and from 50-200kHz might be of interest.
: We need a flat coupling area to couple this probe to solids.
: thanks and regards
: Jens
------------ End Original Message ------------

Dear jens,

Please contact us with more specific data to give u the quote.

Regards.

Simon Amallraja.


 
 Reply 
 
J. Dong
J. Dong
02:23 Jul-01-2004
Re: low frequency UT probe
Hi,

Physical Acoustics Corporation's S9208 sensor is pretty good for this application. It has flat response in this frequency bandwidth. I have used it as an excitation sensor for years.


----------- Start Original Message -----------
: Dear all,
: Who can help or knows a possible source?
: We are looking for a UT probe with almost linear efficiency (if excited by a continuous sine wave) in the band width from (roughly) 10kHz up to 200kHz (we want to sweep the frequency across this range).
: Also probes from around 10-100kHz and from 50-200kHz might be of interest.
: We need a flat coupling area to couple this probe to solids.
: thanks and regards
: Jens
------------ End Original Message ------------




 
 Reply 
 

Product Spotlight

Micro CT

nanoVoxel series has nano-scale resolution upto 500nm by using high voltage X-ray source (from 80-
...
300 kV) with micro/nano focal spot and highly sensitive flat panel detectors and unique Optical coupling detector.
>

OPBOX with standard software is able to do all types of inspections and measurements: flaw detection in welds and materials, scanning of objects, testing composite materials, forged and moulded pieces, many UT inspections, measurements of properties of ma

Typical applications: UT measurements with pulse technique, Measurement of thicknesses also at hig
...
h temperatures, Measurements of properties of materials, including fluids and gases We are delivering a standard version of the software (for any Microsoft Windows up to 10 x64 with Microsoft Hardware certification report Approved) and for special needs: SDK with ready to use examples for LabView, MATLAB x64, C++ wrapper for dll, Python and Linux., and also low-level description of how to control our devices directly from any USB tools
>

FAAST-PA! OEM Patented phased Array for high speed UT inspection

Multiangle, Multifocus, Multifrequency, Multibeam. Instead of stacking UT electronics and having m
...
any PA probes, FAAST-PA is able to transmit all delay laws within ONE single shot in Real time.
>

AIS229 - Multipurpose Real Time System

Latest standard & automatic real time system developed by Balteau. The AIS229 has been designed to
...
do series inspection in a wide variety of industry. Composed of a shielded cabinet, 5 axis manipulator, x-ray generator and tubehead from 160kV to 225kV, a fl at panel & much more, the AIS229 is most certainly one of the most multipurpose RTR system available on the market.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window