where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

621 views
Career Discussions
William Blum
Consultant, Training, Level III Services
NDT Consulting Group Inc., USA, Joined Nov 2000, 92

William Blum

Consultant, Training, Level III Services
NDT Consulting Group Inc.,
USA,
Joined Nov 2000
92
08:02 Jul-20-2004
UT Thickness testing on VLCCs

Can anyone with experience on VLCCs answer these questions?

1. Can you share some experience of climbing in these tanks eg, fixing points etc.?

2. Does the vessel supply an inflatable raft in the event of tank flooding (doing readings from the raft)?

Thanks,
_________________
William Blum



 
 Reply 
 
John O'Brien
Consultant, -
Chevron ETC , USA, Joined Jan 2000, 280

John O'Brien

Consultant, -
Chevron ETC ,
USA,
Joined Jan 2000
280
00:11 Aug-03-2004
Re: UT Thickness testing on VLCCs
Access issues vary greatly dependnet upon vessel design and age. Needless to say most vessels were never designed for in-service inspection access. Many internal tanks have nothing more than one access ladder and staging at one side of each tank.

Others may have internal structural steel work which provides a fixing platform for rope access technicians.

A number of specialist access companies have designed custom solutions to assist in solving these problems.

Working off rafts etc. has a number of safety issues regarding how well the tanks are cleaned and vented during operations. Also how much access you have to get a raft in through an access hatch. Working off inflatable rafts is not the most satble of platform.

Recently a lot of work is done with magnetic crawlers depending upon the type, number and distribution of measurements required to satisfy the classification society.

On double hulled tankers there may be some access through the void spaces agaion dependent upon design.

Our experienceis that ship owners want you to provide everything and do it as quickly and cheaply as possible.



 
 Reply 
 

Product Spotlight

Sci Aps Z-Series Portable Handheld Analysers

The world’s only handheld analyzer that measures carbon content in stainless (yes even L-grades),s
...
teels, and cast irons. Also accepted for low Si analysis for sulfidic corrosion analysis, and is widely used in the power industry for Cr analysis, for flow accelerated corrosion applications.
>

Research and Application Development For NDT

Acuren’s Research and Application Development specializes in the development of advanced ultraso
...
nic inspection techniques and systems for challenging inspection applications, with an emphasis on practical solutions which are field deployable. Services include manual and automated ultrasonic inspection system development, inspection technique optimization using laboratory scale studies and ultrasonic modeling (CIVA, BeamTool), preparing technical justification for technique evaluation and qualification (Probability of Detection and sizing accuracy studies), inspection/calibration/analysis procedure preparation to support field deployment of custom techniques, and development of custom imaging algorithms to support challenging inspection applications.
>

FMC/TFM

Next generation for Phased Array UT is here now with FMC/TFM! Have higher resolution imaging, impr
...
oved signal to noise ratio, characterize, size and analyze defects better with access to several wave mode views and save raw FMC data for higher quality analysis.  Some of the benefits are:
  • Beautiful Image! Easier to understand what you're looking at
  • Completely focused in entire image or volume
  • Much easier to define setups before inspection
  • Easier to decipher geometry echoes from real defects
  • Oriented defects (e.g. cracks) are imaged better
  • See image from different wave modes from one FMC inspection
  • FMC data can be reprocessed/analyzed without going back to the field
>

Ultrasonic Probe Recharacterization Service

NDT Systems offers a comprehensive Aftercare and Recharacterization Service for all our ultrasonic
...
probes. The Recharacterization Service is fully compliant with International ASTM E1065 Standard Guide (and other applicable standards) and offers complete documentation, traceable to the ASTM E1065 Standard. For more details or to schedule Recharacterization Services contact ndtsales@ndtsystems.com
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window