where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

1147 views
Career Discussions
John Wagner
Engineering
Tenneco Automotive, USA, Joined Apr 2004, 3

John Wagner

Engineering
Tenneco Automotive,
USA,
Joined Apr 2004
3
06:22 Aug-11-2004
NDT analysis of bond failures in bushings

Some time ago I asked if anyone had a NDT method for determining the presence of a bond failure in a bushing. The bushing in general is a torus of rubber assebled coaxially between to metal cylinders. I received some answers generally of the type, "Let me see one and I'll let you know". I did not have enough examples to answer that type of question. Obviously, we attempt to avoid developing those. I now have some from a DOE study. If anyone is still interested in addressing this problem, please let me know.


 
 Reply 
 
Boyd Howard
Consultant, In-house NDT consultant
Westinghouse Savannah River Company, USA, Joined Aug 2000, 3

Boyd Howard

Consultant, In-house NDT consultant
Westinghouse Savannah River Company,
USA,
Joined Aug 2000
3
04:48 Aug-12-2004
Re: NDT analysis of bond failures in bushings
----------- Start Original Message -----------
Our computed tomography team has successfully evaluated something very similar. If you want to discuss this further, please contact me.

: Some time ago I asked if anyone had a NDT method for determining the presence of a bond failure in a bushing. The bushing in general is a torus of rubber assebled coaxially between to metal cylinders. I received some answers generally of the type, "Let me see one and I'll let you know". I did not have enough examples to answer that type of question. Obviously, we attempt to avoid developing those. I now have some from a DOE study. If anyone is still interested in addressing this problem, please let me know.
------------ End Original Message ------------




 
 Reply 
 
Randy Plis
Sales,
Metals Testing Company, USA, Joined Jun 2002, 9

Randy Plis

Sales,
Metals Testing Company,
USA,
Joined Jun 2002
9
09:22 Aug-16-2004
Re: NDT analysis of bond failures in bushings
Hello John,

Yes, we are interested at taking a look at your application. Bond testing is one of our most frequent applications. Please send us a sample and additional detail. We are an NDE facility that has both production and R&D capabilities.

Best regards,
Randy Plis

Metals Testing Company
80 Kimberly Drive
South Windsor, CT 06074
(USA

+1-860-289-8225
mtc62@aol.com
www.mtc62.com

----------- Start Original Message -----------
: Some time ago I asked if anyone had a NDT method for determining the presence of a bond failure in a bushing. The bushing in general is a torus of rubber assebled coaxially between to metal cylinders. I received some answers generally of the type, "Let me see one and I'll let you know". I did not have enough examples to answer that type of question. Obviously, we attempt to avoid developing those. I now have some from a DOE study. If anyone is still interested in addressing this problem, please let me know.
------------ End Original Message ------------




 
 Reply 
 
Simon Amallraja
Simon Amallraja
09:13 Aug-18-2004
Re: NDT analysis of bond failures in bushings
----------- Start Original Message -----------
: Some time ago I asked if anyone had a NDT method for determining the presence of a bond failure in a bushing. The bushing in general is a torus of rubber assebled coaxially between to metal cylinders. I received some answers generally of the type, "Let me see one and I'll let you know". I did not have enough examples to answer that type of question. Obviously, we attempt to avoid developing those. I now have some from a DOE study. If anyone is still interested in addressing this problem, please let me know.
------------ End Original Message ------------

We represent Zetec Inc, USA in India. They have similar application equipments in thier range. You can contact us or Zetec directly.

Regards.

D.Simon Amallraja.


 
 Reply 
 
R J Chaudhari
Director,
CALTECH ENGINEERING SERVICES, India, Joined Mar 2003, 13

R J Chaudhari

Director,
CALTECH ENGINEERING SERVICES,
India,
Joined Mar 2003
13
05:16 Aug-21-2004
NDT analysis of bond failures in bushings
Your question is general. It does not specify rubber thickness, sizes of metallic cylinder. What type of metal has been used?
At this stage I can tell you to verify possibility of Sperk tester which is used for bonding between metal and rubber. I can make special device to suit your requirements. You may contact me on email caltech@vsnl.net

----------- Start Original Message -----------
: : Some time ago I asked if anyone had a NDT method for determining the presence of a bond failure in a bushing. The bushing in general is a torus of rubber assebled coaxially between to metal cylinders. I received some answers generally of the type, "Let me see one and I'll let you know". I did not have enough examples to answer that type of question. Obviously, we attempt to avoid developing those. I now have some from a DOE study. If anyone is still interested in addressing this problem, please let me know.
: We represent Zetec Inc, USA in India. They have similar application equipments in thier range. You can contact us or Zetec directly.
: Regards.
: D.Simon Amallraja.
------------ End Original Message ------------




 
 Reply 
 

Product Spotlight

PAUT Probes

Typical Phased Array probes have frequencies between 1MHz and 20MHz and the number of wafers is 10
...
to 128. M2 Electronics offers customers conventionally ultrasound probes and the ability to provide high-precision Phased Array Ultrasound Probes of up to 256 wafers. We can also customize the probe for our customers to meet the specific application requirements of the user.
>

Robotic laser shearography enables 100% inspection of complex, flight-critical composite structures

An article in “Composites World Magazine” showcases Non Destructive Testing of aero-structures
...
with Laser Shearography. Over the years Dantec Dynamics has supplied many solutions for the aerospace industry. Referring to specific customer projects several of these cases are examined to outline the advantages of using Laser Shearography for automated defect detection.
>

OPBOX with standard software is able to do all types of inspections and measurements: flaw detection in welds and materials, scanning of objects, testing composite materials, forged and moulded pieces, many UT inspections, measurements of properties of ma

Typical applications: UT measurements with pulse technique, Measurement of thicknesses also at hig
...
h temperatures, Measurements of properties of materials, including fluids and gases We are delivering a standard version of the software (for any Microsoft Windows up to 10 x64 with Microsoft Hardware certification report Approved) and for special needs: SDK with ready to use examples for LabView, MATLAB x64, C++ wrapper for dll, Python and Linux., and also low-level description of how to control our devices directly from any USB tools
>

Customized Probes and Transducers

With a strong development department and our own piezocomposite production, we accompany you from th
...
e first product idea to serial production. Our scientists are continuously researching new methods in the field of ultrasonic measurement technology. The progress achieved enables us to offer you optimal solutions.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window