where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

Hillger NDT GmbH
was founded in 1984 and develops special ultrasonic imaging systems for high-tech materials.
505 views
Career Discussions
Junjira
Junjira
02:33 Aug-17-2004
Job's Qualification of 3rd Inspector

I am searching for the Inspector 's qualification to be performed the 3rd inspction for OCTG-Tubular, W/H&XT and downhole equiupment.
Could you help to provide any infomation for me??
Thanks and Best regards,
JT



 
 Reply 
 
Nat
Engineering, Chief Examiner -NDT Manager
SGS EGYPT, Singapore, Joined Jan 2002, 4

Nat

Engineering, Chief Examiner -NDT Manager
SGS EGYPT,
Singapore,
Joined Jan 2002
4
04:53 Aug-17-2004
Re: Job's Qualification of 3rd Inspector
----------- Start Original Message -----------
: I am searching for the Inspector 's qualification to be performed the 3rd inspction for OCTG-Tubular, W/H&XT and downhole equiupment.
: Could you help to provide any infomation for me??
: Thanks and Best regards,
: JT
------------ End Original Message ------------
API standard states that Inspection personnel shall be qualified and certified as per the written practice of the company , Most of the companies are following ASNT ‘s Recommended practice ,SNT-TC-1A to qualify and certify their inspection personnel.

Certifications from Organization like IPIA( international pipe inspectors association ) and T.H Hill are also recognized.

The third party inspector should be ideally should have at least Level II in UT, MT,PT,VT and ET Experience and certifications obtained in OCTG sector




 
 Reply 
 

Product Spotlight

Cygnus 6+ PRO Multi-Mode Ultrasonic Thickness Gauge

The Cygnus 6+ PRO thickness gauge is the most advance gauge within the Cygnus range with key featu
...
res including: comprehensive data logging; A-scan and B-scan display; manual gain control; Bluetooth connectivity; and much more. With its unique dual display and three measuring modes (Multiple-Echo, Echo-Echo and Single-Echo), this surface thickness gauge offers maximum versatility for inspections.
>

Wireless TOFD scanner

Quick, accurate and highly reproducible welds testing. The System operates wirelessly and is compat
...
ible with any type of Windows based Laptop, Desktop or Tablet.
>

ISAFE3 Intrinsically Safe Sensor System

ISAFE3 intrinsically safe sensor system of Vallen Systeme is especially targeted at the petrochemica
...
l - as well as oil and gas transportation industry. The sensor system is designed for permanent monitoring or periodic inspection tasks. Sensors are available for different AE-frequency ranges optimized for corrosion and fatigue crack detection and other applications. The ISAFE 3 sensor system consists of an AE-sensor (model ISAS3) certified according to ATEX/IEC for installation in zone 0, gas group IIC, IP68, 20 to +60 °C, and a signal isolator (model SISO3) certified for installation in zone 2. An ISAS3 sensor can be mounted in atmosphere or submerged, e.g. in water or crude oil. It is supported by mounting tools for temporary (magnets) or permanent (welded) installation. ISAFE3 supports automatic sensor coupling test and can be used with any AE signal processor supporting 28V supply at 90 mA peak, e.g. Vallen Systeme ASIP-2/A.
>

GEKKO, Standard and Advanced phased-array for Easier inspection

M2M Gekko® is a field-proven flaw detector offering PAUT, UT, TOFD and TFM through the streamline
...
d user interface Capture™. Released in 32:128, 64:64 or 64:128 channel configurations, Gekko combines high- resolution and speed while reducing inspectors’ training time.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window