where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

Canadian Institute for NDE
We are specialized in training for Radiography, Ultrasonics, Magnetic Particle, Liquid Penetrant, Eddy Current and emerging NDT technologies.
774 views
Career Discussions
Don W
Don W
02:00 Nov-12-2004
Ultrasonic transducer made by Accutron Inc

I have a 20MHz 1/4 inch focussed UT immersion transducer with delay line part number 1B72 F.75 made by Accutron Inc. Does anybody know what happend to this company and how I can get another made ?



 
 Reply 
 
Ed Ginzel
R & D, -
Materials Research Institute, Canada, Joined Nov 1998, 1300

Ed Ginzel

R & D, -
Materials Research Institute,
Canada,
Joined Nov 1998
1300
06:57 Nov-13-2004
Re: Ultrasonic transducer made by Accutron Inc
----------- Start Original Message -----------
: I have a 20MHz 1/4 inch focussed UT immersion transducer with delay line part number 1B72 F.75 made by Accutron Inc. Does anybody know what happend to this company and how I can get another made ?
------------ End Original Message ------------

Don:
Just a question on the style of probe. You indicate that it is a focused immersion probe. But it has a delayline. What is the purpose of the delay line on an immersion probe? Is this to alter the focal distance to some point different from the focus the element was curved for?
Ed





 
 Reply 
 
Ethan
Ethan
05:31 Nov-23-2004
Re: Ultrasonic transducer made by Accutron Inc
I can think of two reasons for using a delay line on an immersion probe. One would be to use the lens to focus the sound to be used in a contact mode (such as the Panametrics Sonopen or Staveley's golden spike)

The other application is usually a fused silica delay line permanently mounted in the transducer and the end of the delay is lensed. The purpose of this is two fold, one being better protection of the element (the matching layer at 20 MHz is very thin and susceptible to water damage). The second being that you have better lens control in fused silica than in a cast epoxy lens.

I don't know what came of Accutron but most transducer manufacturers will 'reverse engineer' the transducer for you if you can supply them an example. Otherwise, call any of these manufacturers and tell them what you need the transducer to do and they will work with you to custom design a unit

Cheers
Ethan

----------- Start Original Message -----------
: : I have a 20MHz 1/4 inch focussed UT immersion transducer with delay line part number 1B72 F.75 made by Accutron Inc. Does anybody know what happend to this company and how I can get another made ?
: Don:
: Just a question on the style of probe. You indicate that it is a focused immersion probe. But it has a delayline. What is the purpose of the delay line on an immersion probe? Is this to alter the focal distance to some point different from the focus the element was curved for?
: Ed
------------ End Original Message ------------




 
 Reply 
 

Product Spotlight

MUSE Mobile Ultrasonic Equipment

The MUSE, a portable ultrasonic imaging system, was developed for in-field inspections of light-weig
...
ht structures. The MUSE consists of a motor-driven manipulator, a water circulation system for the acoustic coupling and a portable ultrasonic flaw detector (USPC 3010). The MUSE provides images of internal defects (A-, B-,C- and D-scan).
>

GEKKO - Portable Phased Array Testing with TFM in Real-Time

The portable phased array testing system GEKKO provides 64 parallel test channels. On creating testi
...
ng parameters the operator is assisted by the CIVA software. Due to its modular set-up the GEKKO instrument is suitable for operators of all skill levels.
>

NDT.net launches mobile-friendly design

NDT.net has revamped its website providing a mobile-friendly design.The front page received a comp
...
letely new design and all other sections are now reacting responsively on mobile devices. This has been a major step to make our website more user- friendly.
>

PAUT Probes

Typical Phased Array probes have frequencies between 1MHz and 20MHz and the number of wafers is 10
...
to 128. M2 Electronics offers customers conventionally ultrasound probes and the ability to provide high-precision Phased Array Ultrasound Probes of up to 256 wafers. We can also customize the probe for our customers to meet the specific application requirements of the user.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window