where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

1214 views
Career Discussions
Phani
Phani
00:01 May-19-2005
Phased array Probes

Can any Please tell me the difference between the Phase array transducers and linear array transducers.
are they same or different?

Thanks
Phani


 
 Reply 
 
Joe Buckley
Consultant, ASNT L-III, Honorary Secretary of BINDT
Level X NDT, BINDT, United Kingdom, Joined Oct 1999, 528

Joe Buckley

Consultant, ASNT L-III, Honorary Secretary of BINDT
Level X NDT, BINDT,
United Kingdom,
Joined Oct 1999
528
01:45 May-19-2005
Re: Phased array Probes
The simple answer is yes they are the same, but not exactly. An array of any shape is 'phased' by driving the different array elements with different timing, so that the resultant beam is scanned, steered or focused.

Most phased array transducers are linear arrays, but annular, segmented or 2-D arrays can also be driven by phased array equipment

Joe


---------- Start Original Message -----------
: Can any Please tell me the difference between the Phase array transducers and linear array transducers.
: are they same or different?
: Thanks
: Phani
------------ End Original Message ------------




 
 Reply 
 
Paul A. Meyer
R & D,
GE Inspection Technologies, USA, Joined Nov 1998, 47

Paul A. Meyer

R & D,
GE Inspection Technologies,
USA,
Joined Nov 1998
47
02:26 May-20-2005
Re: Phased array Probes
Because the sound field is steered or focused, as indicated in the previous response, the individual elements in the array must be designed properly so sound field will maintain its integrity over the intended phasing range. Older style linear arrays with large elements are not suitable for many phased applications. This is the reason many phased arrays appear smaller than non-phased designs.
I hope this helps.
Paul

----------- Start Original Message -----------
: The simple answer is yes they are the same, but not exactly. An array of any shape is 'phased' by driving the different array elements with different timing, so that the resultant beam is scanned, steered or focused.
: Most phased array transducers are linear arrays, but annular, segmented or 2-D arrays can also be driven by phased array equipment
: Joe
:
: ---------- Start Original Message -----------
: : Can any Please tell me the difference between the Phase array transducers and linear array transducers.
: : are they same or different?
: : Thanks
: : Phani
------------ End Original Message ------------




 
 Reply 
 
Phani
Phani
05:54 May-24-2005
Re: Phased array Probes
----------- Start Original Message -----------
: Because the sound field is steered or focused, as indicated in the previous response, the individual elements in the array must be designed properly so sound field will maintain its integrity over the intended phasing range. Older style linear arrays with large elements are not suitable for many phased applications. This is the reason many phased arrays appear smaller than non-phased designs.
: I hope this helps.
: Paul
: : The simple answer is yes they are the same, but not exactly. An array of any shape is 'phased' by driving the different array elements with different timing, so that the resultant beam is scanned, steered or focused.
: : Most phased array transducers are linear arrays, but annular, segmented or 2-D arrays can also be driven by phased array equipment
: : Joe
: :
: : ---------- Start Original Message -----------
: : : Can any Please tell me the difference between the Phase array transducers and linear array transducers.
: : : are they same or different?
: : : Thanks
: : : Phani
------------ End Original Message ------------

Thank you very much.

Regards
Phani


 
 Reply 
 

Product Spotlight

CIVA 2020 UT Module

CIVA NDE Simulation Software is the world leader of NDT Simulation. The UT simulation Module incl
...
udes: - "Beam computation": Beam propagation simulation - "Inspection Simulation": Beam interaction with flaws or specimens The user can simulate a whole inspection process (pulse echo, tandem or TOFD) with a wide range of probes (conventional, Phased- arrays or EMAT), components, and flaws.
>

Magnetic X-Ray Pipeline Crawler 6''-60''

Suitable to work in 6''-60''diameter with speed of up to 18m/min, Max. moving diatance 5 kilometer
...
s and provide the efficient inspection of the pipeline.
>

Ultrasonic Squirter/Gantry System

TecScan’s NDT Ultrasonic Gantry Systems are industrial Squirter scanners designed for non-destru
...
ctive quality testing and raster scanning of large structures and parts. The Gantry Systems are usually composed of an Industrial Mechanical Scanner and a Control Room with System Workstation.
>

NDTkit RT

NDTkit RT, TESTIA's Digital Radiography software The NDTkit product line software for X-ray analysi
...
s. NDTkit RT is a software benefiting from the Ultis kernel which is dedicated to radiographic image analysis. It offers a set of tools and filtering processes to assist RT operators in finding relevant flaws.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window