where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

DASEL SISTEMAS
Our Phased Array equipments, based on SITAU Technology, are among the PAS highest performance in the market.
951 views
Career Discussions
John Hower
John Hower
05:23 Jun-15-2005
Multidiscipline???

On this forum, I found a guys resume with lot of job involvement in various engineering fields. Does it really fit for an assessment? No one can be a master of everything. It seems he has really lost focus on which field he belongs. I trust the idea of Multidiscipline Inspector to an extent is a hoax. Most of the youngsters are really losing focus on what they need to achieve. I have come across so many resumes which writes a lot of various Engineering roles, but in an interview doesn't know which Engineering field they belong. Any comments


 
 Reply 
 
Darren Reilly
Darren Reilly
08:10 Jun-15-2005
Re: Multidiscipline???
I agree with your point.

Looking at some of the resumes, not just on this site but others also, I have noticed that some people have that much experience/qualifications that they would have to be around 150 years old.

This will eventually lead to employers feeling frustrated at the lack of honesty and they will look elsewhere for future applicants leaving the honest ones to struggle even more to find employment.




 
 Reply 
 
John Hower
John Hower
03:17 Jun-16-2005
Re: Multidiscipline???
That's right, definitely it will affect the job market. I believe the focus must be on honest resumes. But honest applicants always gets kicked out due to several such bogus CV's. I have seen people who has over 25 years experience in field still faking their resume by incorporating stolen terminologies from several fields of Engineering to decorate their dishonesty. I really cant understand the requirement for such a thing if you really are experienced over 25 years! These acts of faking resume are really spoiling the job scenario.


 
 Reply 
 
James Gauthier
Engineering,
ABB, Inc., USA, Joined Nov 2007, 25

James Gauthier

Engineering,
ABB, Inc.,
USA,
Joined Nov 2007
25
05:27 Jun-17-2005
Re: Multidiscipline???
I interviewed several promising Ultrasonic Technicians whose resume read extremely well. All of the individuals were highly experienced, qualified (Centrally Certified), etc. The interesting point is that our interview process required them to calibrate, establish sensitivity, and inspect some known test samples. The individuals were required to accept/reject to either ASME or AWS whichever they were more comfortable with.

I have to say I was more than a little concerned. None of the individuals could calibrate the instrument much less find a defect. One of the candidates then said he was not used to using a USN58L or EPOCH IV as a test instrument. He stated that he used a USN52 for all his inspection experience. I excused myself and went and grabbed a USN52 from the shop floor and gave him a chance to redo the exam. Again he failed miserably.

It is extremely upsetting to know you have to screen a resume with such paranoia. You can't belive what you read. This is one of the main reasons I believe in a performance qualification during the interview. It takes longer but you certainly weed out the individuals that have hyped up their resumes.




 
 Reply 
 
Nick Welland
Other, Quality and NDT
Aben Technical Services, Australia, Joined Oct 1999, 42

Nick Welland

Other, Quality and NDT
Aben Technical Services,
Australia,
Joined Oct 1999
42
03:26 Jun-18-2005
Re: Multidiscipline???
----------- Start Original Message -----------
: I agree with your point.
: Looking at some of the resumes, not just on this site but others also, I have noticed that some people have that much experience/qualifications that they would have to be around 150 years old.
: This will eventually lead to employers feeling frustrated at the lack of honesty and they will look elsewhere for future applicants leaving the honest ones to struggle even more to find employment.
------------ End Original Message ------------

The problem of "hyped up" resumes has been around for ever.
In the Seventies it was almost universal for UT operators to have to pass a practical test to get a start on a given project. This was toned down in some quarters as more robust schemes of central certification were introduced. We still find that the holding of a certificate and claimed experience does not make a technician.
UT requires a very odd set of personal attributes and I have wondered whether anyone has ever developed a workable psychometric test to identify suitable prospective persons.
Regards,
Nick



 
 Reply 
 

Product Spotlight

Research and Application Development For NDT

Acuren’s Research and Application Development specializes in the development of advanced ultraso
...
nic inspection techniques and systems for challenging inspection applications, with an emphasis on practical solutions which are field deployable. Services include manual and automated ultrasonic inspection system development, inspection technique optimization using laboratory scale studies and ultrasonic modeling (CIVA, BeamTool), preparing technical justification for technique evaluation and qualification (Probability of Detection and sizing accuracy studies), inspection/calibration/analysis procedure preparation to support field deployment of custom techniques, and development of custom imaging algorithms to support challenging inspection applications.
>

A1525 SOLO

A1525 Solo – the most compact and affordable TMF unit with two phased array transducers and 3D v
...
isualization and analysis software in standard delivery set. A compact, ergonomic and easy to handheld Phased Array unit based on Total Focusing Method for easy-going imaging of inspection objects with two-dimensional and three-dimensional visualization and evaluation of inspection results.
>

ISAFE3 Intrinsically Safe Sensor System

ISAFE3 intrinsically safe sensor system of Vallen Systeme is especially targeted at the petrochemica
...
l - as well as oil and gas transportation industry. The sensor system is designed for permanent monitoring or periodic inspection tasks. Sensors are available for different AE-frequency ranges optimized for corrosion and fatigue crack detection and other applications. The ISAFE 3 sensor system consists of an AE-sensor (model ISAS3) certified according to ATEX/IEC for installation in zone 0, gas group IIC, IP68, 20 to +60 °C, and a signal isolator (model SISO3) certified for installation in zone 2. An ISAS3 sensor can be mounted in atmosphere or submerged, e.g. in water or crude oil. It is supported by mounting tools for temporary (magnets) or permanent (welded) installation. ISAFE3 supports automatic sensor coupling test and can be used with any AE signal processor supporting 28V supply at 90 mA peak, e.g. Vallen Systeme ASIP-2/A.
>

VeeScan AirCraft Wheel Inspection

The VEESCAN offers maximum flexibility, has a proven mechanical design and records of breakdown-fr
...
ee operation of over 365 days. Appealing to companies in the Aerospace industry, the VEESCAN is ideal for all wheel-testing environments. With a wide selection of probes, the VeeScan allows your wheel testing facility the flexibility to select the most compatible configurations with their workload.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window