where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

676 views
Career Discussions
K. F.
K. F.
08:38 Jun-27-2005
Robotic Inspections: Pros / Con / Experience

All,

An inspection company has recently sent my company information on inspections that they perform with ROV's.(Remote Operated Vehicle) I have some experience with ROV's taking UT Thickness readings on storage tank shells externaly. (B-scan and grid-type straight beam) This brief experience was about 6 or so years ago, and there seemed to me to be a high level of expertise needed on the part of the technician/operator, in order to operate, calibrate, and trouble shoot the equipment. With this being said, it seemed that this would be something that would be utilized for a storage tank that stored a none hazardous material. (i.e. water)

The particular ROV system is OTIS. Since I don't have much experience with much of the ROV technology that seems to be out there, I figured that I would post to see what others experience is with this system or other systems that are out there. I would like to know the pro's, as well as the con's of ROV inspections as well as experiences that companies with storagetanks have had with these type of inspections. Good. Bad. Possible recomendations. How these inspection compare to tanking equipment out of service and haveing the same inspections performed by inspection personal.

Thank you,

K.Fosha



 
 Reply 
 
Richard Kazares
Richard Kazares
03:30 Jun-27-2005
Re: Robotic Inspections: Pros / Con / Experience
We manufacture an automated "shell" inspection system - called the "Large Structure Inspection (LSI) System" - which is a magnetically attached (125 Kg force) robotic scanner with EXTREMELY high-speed scanning capability - for thickness, shear and TOFD applications.

There are over 40 of these systems operating World-Wide on a VARIETY of structures - including tanks, heat exchanger shells, spheres, ship hulls, piping, and other structural elements.

The system is proven, and afordable - and also fully automated - with a MINIMUM of operator setup and intervention. For thickness applications, operator skill requirement is NOT prohibitive.

I will send you further information, privately.

----------- Start Original Message -----------
: All,
: An inspection company has recently sent my company information on inspections that they perform with ROV's.(Remote Operated Vehicle) I have some experience with ROV's taking UT Thickness readings on storage tank shells externaly. (B-scan and grid-type straight beam) This brief experience was about 6 or so years ago, and there seemed to me to be a high level of expertise needed on the part of the technician/operator, in order to operate, calibrate, and trouble shoot the equipment. With this being said, it seemed that this would be something that would be utilized for a storage tank that stored a none hazardous material. (i.e. water)
: The particular ROV system is OTIS. Since I don't have much experience with much of the ROV technology that seems to be out there, I figured that I would post to see what others experience is with this system or other systems that are out there. I would like to know the pro's, as well as the con's of ROV inspections as well as experiences that companies with storage tanks have had with these type of inspections. Good. Bad. Possible recomendations. How these inspection compare to tanking equipment out of service and haveing the same inspections performed by inspection personal.
: Thank you,
: K.Fosha
------------ End Original Message ------------




 
 Reply 
 
John O'Brien
Consultant, -
Chevron ETC , USA, Joined Jan 2000, 280

John O'Brien

Consultant, -
Chevron ETC ,
USA,
Joined Jan 2000
280
03:20 Jul-01-2005
Re: Robotic Inspections: Pros / Con / Experience
OTIS is the leading brand name in in-service robots for storage tank inspection with fluid still inside. API 653 now specifically references this technology although not in any way mandating or recommending it. The use of a robotic vehicle with either UT or Electromagnetics to measure actual wall thickness is one option of assessing storage tank floors without removing the tank from service. OTIS works in both hydrocarbon and non hydrocarbon environments.

You may only apply it to a sample or the whole floor. As with any technique it has advantages, disadvantages and limitations.


 
 Reply 
 

Product Spotlight

IRIS 9000Plus - Introducing the next generation of heat exchanger inspection.

Representing the seventh generation of the IRIS system, the IRIS 9000 Plus has nearly 200 years of c
...
ombined field inspection experience incorporated in its design. This experience combined with a strong commitment to quality and a history of innovation has made Iris Inspection Services® the undisputed leader in IRIS technology.
>

OmniScan™ X3 flaw detector

The OmniScan X3 flaw detector is a complete phased array toolbox. Powerful tools, like total focus
...
ing method (TFM) images and advanced visualization capabilities, enable you to complete your inspection with greater confidence.
>

Extended Range Variable Wall® Piping Calibration Blocks for Longseam Inspection

This set of two blocks has been specially designed for situations where ultrasonic examination tak
...
es place circumferentially or “around the curve” for applications such as inspection of longseam welds in piping and vessels. Jointly designed by PH Tool and Holloway NDT, the blocks feature side-drilled hole reflectors positioned within novel compound-curves, each with multiple thickness steps. The unique design results in a light and compact form factor, with the largest block weighing just over 15 lbs and spanning just 16 ¾”. Coverage is provided for nominal pipe sizes from 6” to 10” in the small block and 12” to a whopping 56” in the large block. The compound OD curves and multiple wall thicknesses actually exceed ASME requirements, providing exceptional signal response and measurement accuracy. Properly managing beam divergence off the ID and stabilizing beam skew due to probe rocking is essential to maintaining a consistent calibration when inspecting lengthwise on curved surfaces.
>

FAAST-PA! OEM Patented phased Array for high speed UT inspection

Multiangle, Multifocus, Multifrequency, Multibeam. Instead of stacking UT electronics and having m
...
any PA probes, FAAST-PA is able to transmit all delay laws within ONE single shot in Real time.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window