where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

965 views
Career Discussions
Ron Olson
R & D, Aviation
The Best Aviation Company In The World, USA, Joined Feb 2005, 23

Ron Olson

R & D, Aviation
The Best Aviation Company In The World,
USA,
Joined Feb 2005
23
07:39 Jul-20-2005
Fatigue vs. Stress

Is stress the same thing as fatigue? I thought they were the same. Any engineers care to take this one? Thank you.


    
 
 
Ed Ginzel
R & D, -
Materials Research Institute, Canada, Joined Nov 1998, 1252

Ed Ginzel

R & D, -
Materials Research Institute,
Canada,
Joined Nov 1998
1252
03:31 Jul-21-2005
Re: Fatigue vs. Stress
I am not an engineer but the definitions are commonly available to those in NDT.
Stress: force per unit area
Fatigue: cyclic application of stress

Whereas fatigue is the process, the result is often fatigue failure. In this type of failure maximum stresses may be below the yield stress.

Ed

----------- Start Original Message -----------
: Is stress the same thing as fatigue? I thought they were the same. Any engineers care to take this one? Thank you.
------------ End Original Message ------------




    
 
 
John Brunk
Engineering, NDT Level III
Self employed, part-time, USA, Joined Oct 1999, 158

John Brunk

Engineering, NDT Level III
Self employed, part-time,
USA,
Joined Oct 1999
158
09:36 Jul-21-2005
Re: Fatigue vs. Stress
----------- Start Original Message -----------
: Is stress the same thing as fatigue? I thought they were the same. Any engineers care to take this one? Thank you.
------------ End Original Message ------------

Fatigue is often used to mean the tendency of a material or object to break as the result of repeated or cyclic stress, as for example an expected fatigue life of 250,000 cycles. Stress is essentially the same thing as force, as in stress-strain curve. Fatigue cracking is the result of cyclic stress such as repeated bending and straightening, flexing, taking off and landing, etc.



    
 
 
John Brunk
Engineering, NDT Level III
Self employed, part-time, USA, Joined Oct 1999, 158

John Brunk

Engineering, NDT Level III
Self employed, part-time,
USA,
Joined Oct 1999
158
09:37 Jul-21-2005
Re: Fatigue vs. Stress
----------- Start Original Message -----------
: Is stress the same thing as fatigue? I thought they were the same. Any engineers care to take this one? Thank you.
------------ End Original Message ------------

Fatigue is often used to mean the tendency of a material or object to break as the result of repeated or cyclic stress, as for example an expected fatigue life of 250,000 cycles. Stress is essentially the same thing as force, as in stress-strain curve. Fatigue cracking is the result of cyclic stress such as repeated bending and straightening, flexing, taking off and landing, etc.



    
 
 

Product Spotlight

Ultrasonic Testing Immersion Tanks with Unmatched Scanning Features

TecScan’s non-destructive testing Ultrasonic Immersion Tanks & scanners are designed for high pe
...
rformance and demanding NDT testing applications. Our Scan3D™ line of High Precision Immersion Tanks are specifically designed for automated ultrasonic testing of complex composites parts used in aerospace and industrial applications.
>

Robotic laser shearography enables 100% inspection of complex, flight-critical composite structures

An article in “Composites World Magazine” showcases Non Destructive Testing of aero-structures
...
with Laser Shearography. Over the years Dantec Dynamics has supplied many solutions for the aerospace industry. Referring to specific customer projects several of these cases are examined to outline the advantages of using Laser Shearography for automated defect detection.
>

Compact NDT inspection-heads for measurements with active thermography

The compact inspection head is suitable for thermographic ndt tasks. The uncooled infrared camera
...
is specially developed for NDI-tasks and offers a thermal sensitivity until now known only from thermal imagers with cooled detector. All required components and functions are integrated into the inspection-head. You will only need an ethernet cable to connect the sensor with the evaluation system.
>

Ultrasonic tomograph for imaging of concrete structures А1040 MIRA

Applicable for concrete inspection allowing imaging of the internal structure of objects from conc
...
rete, reinforced concrete, different stones. The operation applies pulse-echo technique at one-side access to the object. The instrument is feasible for concrete inspection for searching conduct ducts, conduits, detection of foreign inclusions, holes, honeycombing, cracks and other concrete defects.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window