where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

891 views
Career Discussions
Andre van Vuuren
Andre van Vuuren
09:53 Aug-02-2005
Lazer on Internal Pitting Corrosion

Hi
Just how accurate is lazer scanning on the bore of 1" & 3/4" carbon steel tubing that is severly pitted on the internal surface.

Regard
Andre



 
 Reply 
 
Rich Roberts
Engineering, Executive Managment
Quest Integrity Group, USA, Joined Nov 1998, 78

Rich Roberts

Engineering, Executive Managment
Quest Integrity Group,
USA,
Joined Nov 1998
78
06:24 Aug-03-2005
Re: Lazer on Internal Pitting Corrosion
Good Day Andre van Vuuren,

The laser scanning technologies are very accurate when measuring depth and area dimensions of small internal pitting. The laser beams diameter is typically 0.010” (0.25mm) which enables a pit with a area diameter as small as ½ the beam with or 0.005” (0.127mm) to be resolved. The depth measurement accuracy is typically +/-0.002” (0.05mm).

About 5-6 years ago the Electrical Power Research Institute (EPRI) and Materials Technologies Institute (MTI) did a joint study comparing the LOTIS ‘laser” method to IRIS, ET, MFL, RFET and others. During this study the LOTIS was found to be the superior method on internal pitting in tube diameters between 5/8” (16mm) to 2” (51mm). Many other comparison studies by major oil companies have come up with similar results.

We commonly apply the LOTIS laser technology in tubes with diameter ranging from 5/8” (16mm) and 6” (152mm). If you would like any further details, please feel free to forward the questions.

Regards, Rich

----------- Start Original Message -----------
: Hi
: Just how accurate is lazer scanning on the bore of 1" & 3/4" carbon steel tubing that is severly pitted on the internal surface.
: Regard
: Andre
------------ End Original Message ------------




 
 Reply 
 
James Doyle
Consultant
Laser Techniques Company, LLC, USA, Joined Jan 2003, 6

James Doyle

Consultant
Laser Techniques Company, LLC,
USA,
Joined Jan 2003
6
09:00 Aug-06-2005
Re: Lazer on Internal Pitting Corrosion
----------- Start Original Message -----------
: Hi
: Just how accurate is lazer scanning on the bore of 1" & 3/4" carbon steel tubing that is severly pitted on the internal surface.
: Regard
: Andre
------------ End Original Message ------------

I would also suggest that you visit www.Laser-NDT.com

Laser Techniques Company is a leader in the field of laser-based NDT

Best regards,

James Doyle



 
 Reply 
 

Product Spotlight

YXLON Cougar EVO

Scalable small footprint X-ray inspection systems for assembly and laboratory applications. The
...
YXLON Cougar EVO series was designed to provide the "best-in- class" inspection solutions for SMT, semiconductor, and laboratory assembly applications, while maintaining a small system footprint for maximum convenience. With optimized software and hardware, these systems produce higher quality and more consistent results than other electronics inspection systems currently on the market.
>

NDTkit RT

NDTkit RT, TESTIA's Digital Radiography software The NDTkit product line software for X-ray analysi
...
s. NDTkit RT is a software benefiting from the Ultis kernel which is dedicated to radiographic image analysis. It offers a set of tools and filtering processes to assist RT operators in finding relevant flaws.
>

FAAST-PA! OEM Patented phased Array for high speed UT inspection

Multiangle, Multifocus, Multifrequency, Multibeam. Instead of stacking UT electronics and having m
...
any PA probes, FAAST-PA is able to transmit all delay laws within ONE single shot in Real time.
>

FD800 Bench Top Flaw Detectors

The bench-top FD800 flaw detector range combines state-of-the-art flaw detection with advanced mater
...
ial thickness capabilities. Designed for use in the laboratory these gauges are the tool you need for all your flaw detecting needs.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window