where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
470 views
Career Discussions
Member
Member
00:49 Oct-10-2005
Lack of ASNT ET Level II Certification

Can anyone guess why ASNT does not certify for ET Level 2?
All other basic methods (VT, PT, MT, UT and RT) are mentioned.

ACCP Level II Certification Link: http://www.asnt.org/certification/levelii/index.htm

I intend to ask ASNT the reason as well but would like the forums opinion.

Thank you.


    
 
 Reply 
 
N.Kuppusamy
Consultant, Level-III
United Testing Co. Pte Ltd, Singapore, Joined Jan 2003, 13

N.Kuppusamy

Consultant, Level-III
United Testing Co. Pte Ltd,
Singapore,
Joined Jan 2003
13
03:12 Oct-11-2005
Re: Lack of ASNT ET Level II Certification
Hi,
I hope ASNT is working on that and in near future it may be included.

In eddy current testing every test condition is unique due to large number of variables and it is difficult to decide on test samples (for practical examination).

There are certain classifications to be made and suitable test samples to be prepared. Recommendations on these are usually done by a committee set-up for specific purpose. The committee has to interact with Industry, Manufactures, Users and experts. This is a long time process that is why it is not included now.

nksamy

----------- Start Original Message -----------
: Can anyone guess why ASNT does not certify for ET Level 2?
: All other basic methods (VT, PT, MT, UT and RT) are mentioned.
:
: ACCP Level II Certification Link: http://www.asnt.org/certification/levelii/index.htm
: I intend to ask ASNT the reason as well but would like the forums opinion.
:
: Thank you.
------------ End Original Message ------------




    
 
 Reply 
 

Product Spotlight

Cygnus 6+ PRO Multi-Mode Ultrasonic Thickness Gauge

The Cygnus 6+ PRO thickness gauge is the most advance gauge within the Cygnus range with key featu
...
res including: comprehensive data logging; A-scan and B-scan display; manual gain control; Bluetooth connectivity; and much more. With its unique dual display and three measuring modes (Multiple-Echo, Echo-Echo and Single-Echo), this surface thickness gauge offers maximum versatility for inspections.
>

YXLON Cougar EVO

Scalable small footprint X-ray inspection systems for assembly and laboratory applications. The
...
YXLON Cougar EVO series was designed to provide the "best-in- class" inspection solutions for SMT, semiconductor, and laboratory assembly applications, while maintaining a small system footprint for maximum convenience. With optimized software and hardware, these systems produce higher quality and more consistent results than other electronics inspection systems currently on the market.
>

Varex Imaging Large Field of View (FOV) Digital Detector Arrays (DDAs)

A larger FOV DDA can reduce the space and volume of the X-ray inspection system on the factory floor
...
, enable faster scanning times, better throughput and better resolution images at a lower dose. Customers can also save time and money. With these benefits in mind, Varex Imaging has designed a family of large FOV detectors (4343HE, XRD 1611, 4343DX-I, 4343CT) for our industrial imaging customers.
>

TESTD-PT SYSTEM

Pulse thermography is a non-contact test method that is ideal for the characterization of thin fil
...
ms and coatings or the detection of defects. With a remarquable short test time and a high detection sensitivity, the Telops TESTD-PT is the perfect tool for non- destructive testing. With such high frame rates, it is even possible to investigate highly conductive or diffusive materials.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window