The Largest Open Access Portal of Nondestructive Testing (NDT)

504 views Career Discussions Member Member 00:49 Oct-10-2005 Lack of ASNT ET Level II Certification Can anyone guess why ASNT does not certify for ET Level 2? All other basic methods (VT, PT, MT, UT and RT) are mentioned. ACCP Level II Certification Link: http://www.asnt.org/certification/levelii/index.htm I intend to ask ASNT the reason as well but would like the forums opinion. Thank you.    Reply  Translate  Close   N.Kuppusamy Consultant, Level-III United Testing Co. Pte Ltd, Singapore, Joined Jan 2003, 13 N.Kuppusamy Consultant, Level-III United Testing Co. Pte Ltd, Singapore, Joined Jan 2003 13 03:12 Oct-11-2005 Re: Lack of ASNT ET Level II Certification Hi, I hope ASNT is working on that and in near future it may be included. In eddy current testing every test condition is unique due to large number of variables and it is difficult to decide on test samples (for practical examination). There are certain classifications to be made and suitable test samples to be prepared. Recommendations on these are usually done by a committee set-up for specific purpose. The committee has to interact with Industry, Manufactures, Users and experts. This is a long time process that is why it is not included now. nksamy ----------- Start Original Message ----------- : Can anyone guess why ASNT does not certify for ET Level 2? : All other basic methods (VT, PT, MT, UT and RT) are mentioned. : : ACCP Level II Certification Link: http://www.asnt.org/certification/levelii/index.htm : I intend to ask ASNT the reason as well but would like the forums opinion. : : Thank you. ------------ End Original Message ------------    Reply  Translate  Close

Product Spotlight Ultrasonic Squirter/Gantry System StandTecScan Systems TecScan’s NDT Ultrasonic Gantry Systems are industrial Squirter scanners designed for non-destru ... ctive quality testing and raster scanning of large structures and parts. The Gantry Systems are usually composed of an Industrial Mechanical Scanner and a Control Room with System Workstation. > 5 Showcases4 Videos Conformable wedge transducer StandIMASONIC SAS The conformability is obtained with a flexible membrane filled with water between the transducer and ... the inspected component. The coupling between the membrane and the component requires a small quantity of water or couplant. The conformable wedge combines the acoustic performance of immersion technique with good coupling and low attenuation. > FMC/TFM StandAdvanced OEM Solutions Next generation for Phased Array UT is here now with FMC/TFM! Have higher resolution imaging, impr ... oved signal to noise ratio, characterize, size and analyze defects better with access to several wave mode views and save raw FMC data for higher quality analysis.  Some of the benefits are: Beautiful Image! Easier to understand what you're looking at Completely focused in entire image or volume Much easier to define setups before inspection Easier to decipher geometry echoes from real defects Oriented defects (e.g. cracks) are imaged better See image from different wave modes from one FMC inspection FMC data can be reprocessed/analyzed without going back to the field > 3 Showcases Sci Aps Z-Series Portable Handheld Analysers StandGammatec NDT Supplies SOC Ltd The world’s only handheld analyzer that measures carbon content in stainless (yes even L-grades),s ... teels, and cast irons. Also accepted for low Si analysis for sulfidic corrosion analysis, and is widely used in the power industry for Cr analysis, for flow accelerated corrosion applications. > 5 Showcases5 Videos more Showcases

Share...

• Home
• Exhibition
• Archive
• Forum
• Jobs
• Members
• Events
• Directory
• NDT A-Z

• Advertise
• Privacy Policy
• Contact & Imprint
• About

© NDT.net - Where expertise comes together. The Largest Open Access Portal of Nondestructive Testing (NDT)- since 1996 - -