- since 1996 -
GUL Subsea Solutions - Screeening & Monitoring
To inspect new and existing subsea lines, you need proven technology and experience. GUL offers it's
technology to solve this challenge: GUL Subsea and gMAT Transducer Rings.
UCI Hardness Tester NOVOTEST T-U2
UCI hardness tester NOVOTEST T-U2 is is used for non-destructive hardness testing of: metals and
alloys by scales of hardness: Rockwell (HRC), Brinell (HB), Vickers (HV); non-ferrous metals, alloys of iron etc., and using five additional scales for calibration; with tensile strength (Rm) scale determines the tensile strength of carbon steel pearlitic products by automatic recalculation from Brinell (HB) hardness scale.
Scatter Correction for Industrial Cone-Beam Computed Tomography (CBCT)
Download our white paper on Scatter Correction for Industrial Cone-Beam Computed Tomography (CBCT)
Using 3D VSHARP, a fast GPU-Based Linear Boltzmann Transport Equation Solver here: http://bit.ly/2Y0t78P
MANTIS is a compact, powerful and affordable flaw detector (16:64PR), dedicated to field operators
. This portable equipment offers standard (electronic-, sector-, compound scan, conventional UT for pulse-echo, dual array and TOFD inspections), and advanced phased-array (real-time TFM -Total Focusing Method). MANTIS benefits from the same intuitive and user-friendly interface (CAPTURE) than Gekko for easier inspections.