where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

TWI
TWI is a world leading research and technology organisation established in 1946. From bases in the UK, USA, China, Malaysia, Middle East, India a ...
427 views
Career Discussions
sankartr
service
UCE, India, Joined Apr 2004, 1

sankartr

service
UCE,
India,
Joined Apr 2004
1
06:48 Oct-19-2004
transducer design

Dear All,
Can anyboby help me in getting some information to design an ultrasonic transducer.
Regards.


 
 Reply 
 
Simon Amallraja
Simon Amallraja
03:47 Oct-22-2004
Re: transducer design
----------- Start Original Message -----------
: Dear All,
: Can anyboby help me in getting some information to design an ultrasonic transducer.
: Regards.
------------ End Original Message ------------

Dear Sankar,
If you can give your specific details of requirements,we can help you.

Simon Amallraja.


 
 Reply 
 
sandra blessed
sandra blessed
00:57 Mar-10-2007
Re: transducer design
----------- Start Original Message -----------
: : Dear All,
: : Can anyboby help me in getting some information how to design of an optical transducer, its types of optical transducers and their characteristics
: :
Regards.
: Dear Sankar,
: If you can give your specific details of requirements,we can help you.
: Simon Amallraja.
------------ End Original Message ------------




 
 Reply 
 

Product Spotlight

Conformable wedge transducer

The conformability is obtained with a flexible membrane filled with water between the transducer and
...
the inspected component. The coupling between the membrane and the component requires a small quantity of water or couplant. The conformable wedge combines the acoustic performance of immersion technique with good coupling and low attenuation.
>

Immersion systems

ScanMaster ultrasonic immersion systems are designed for high throughput, multi shift operation in a
...
n industrial or lab environment. These fully integrated systems provide various scanning configurations and incorporate conventional and phased arrays technologies to support diverse applications, such as inspection of disks, bars, shafts, billets and plates. All of ScanMaster immersion systems are built from high accuracy scanning frames allowing for scanning of complex parts and include a multi-channel ultrasonic instrument with exceptional performance. The systems are approved by all major manufacturers for C-scan inspection of jet engine forged discs. Together with a comprehensive set of software modules these flexible series of systems provide the customer with the best price performance solutions.
>

Varex Imaging Large Field of View (FOV) Digital Detector Arrays (DDAs)

A larger FOV DDA can reduce the space and volume of the X-ray inspection system on the factory floor
...
, enable faster scanning times, better throughput and better resolution images at a lower dose. Customers can also save time and money. With these benefits in mind, Varex Imaging has designed a family of large FOV detectors (4343HE, XRD 1611, 4343DX-I, 4343CT) for our industrial imaging customers.
>

FMC/TFM

Next generation for Phased Array UT is here now with FMC/TFM! Have higher resolution imaging, impr
...
oved signal to noise ratio, characterize, size and analyze defects better with access to several wave mode views and save raw FMC data for higher quality analysis.  Some of the benefits are:
  • Beautiful Image! Easier to understand what you're looking at
  • Completely focused in entire image or volume
  • Much easier to define setups before inspection
  • Easier to decipher geometry echoes from real defects
  • Oriented defects (e.g. cracks) are imaged better
  • See image from different wave modes from one FMC inspection
  • FMC data can be reprocessed/analyzed without going back to the field
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window