where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

ACS-Solutions GmbH
develop and manufacture hi-tech devices for Ultrasonic Testing
981 views
Technical Discussions
Dipl.-Ing. Martin Heinz
Dipl.-Ing. Martin Heinz
09:06 Oct-10-2000
Air Coupled UT Market Study

Dear experts,

I am collecting any information for doing a market research concerning to NDT based on air coupled UT.
For that I would like to start a discussion where I receive your opinions on the numbers of users and applications of air coupled UT in contrast to other ultrasonic testing methods (contact, immersion, water beam coupling). I also would like to receive your opinions of possible future applications for air coupled UT if more advanced probes would be available (e.g. 1D and 2D ultrasonic arrays with high bandwidth and frequencies).
Anybody who takes part on the discussion or follows the discussion can profite of the opinions of each other.

Thank you very much!

Martin Heinz.


 
 Reply 
 
Jean-Louis ARNAUD
Jean-Louis ARNAUD
09:17 Oct-10-2000
Re: Air Coupled UT Market Study
: Dear experts,

: I am collecting any information for doing a market research concerning to NDT based on air coupled UT.
: For that I would like to start a discussion where I receive your opinions on the numbers of users and applications of air coupled UT in contrast to other ultrasonic testing methods (contact, immersion, water beam coupling). I also would like to receive your opinions of possible future applications for air coupled UT if more advanced probes would be available (e.g. 1D and 2D ultrasonic arrays with high bandwidth and frequencies).
: Anybody who takes part on the discussion or follows the discussion can profite of the opinions of each other.

: Thank you very much!

: Martin Heinz.




 
 Reply 
 
Jean-Louis ARNAUD
Jean-Louis ARNAUD
09:17 Oct-10-2000
Re: Air Coupled UT Market Study
: Dear experts,

: I am collecting any information for doing a market research concerning to NDT based on air coupled UT.
: For that I would like to start a discussion where I receive your opinions on the numbers of users and applications of air coupled UT in contrast to other ultrasonic testing methods (contact, immersion, water beam coupling). I also would like to receive your opinions of possible future applications for air coupled UT if more advanced probes would be available (e.g. 1D and 2D ultrasonic arrays with high bandwidth and frequencies).
: Anybody who takes part on the discussion or follows the discussion can profite of the opinions of each other.

: Thank you very much!

: Martin Heinz.




 
 Reply 
 
Wolfgang Bisle
Wolfgang Bisle
09:00 Oct-31-2000
Re: Air Coupled UT Market Study
Dear Mr. Heinz,

I think, with the improvements done in the past, with the equipment available on the market and with upcomming developements especially in transducer techniques, the aircoupled ultrasound will have a great future especially in the field of advanced structures and materials for aircraft design.
Especially composites and sandwich structures open a wide field of possible inspection applications.
Since some years we investigate the capabilities of aircoupled ultrasound. Starting with simple through transmission testing of honeycomb sandwich (CFRP/NOMEX or CFRP-foam) to materials like GLARE or ARALL the next consequent step is application of lambwave testing. With lambwave setups I think there are already a lot of applications to solve. I know that the Univ. of Strathclyde already worked since several years on the use of receiver arrays for aircoupled US; and I guess there are already systems in operation in the european aeronautic industry using array setups.

Maybe this helps a little for your survey.
W.Bisle, EADS Airbus GmbH Bremen


 
 Reply 
 
ying qin
ying qin
05:51 Jan-12-2001
Re: Air Coupled UT Market Study
: : Dear experts,

: : I am collecting any information for doing a market research concerning to NDT based on air coupled UT.
: : For that I would like to start a discussion where I receive your opinions on the numbers of users and applications of air coupled UT in contrast to other ultrasonic testing methods (contact, immersion, water beam coupling). I also would like to receive your opinions of possible future applications for air coupled UT if more advanced probes would be available (e.g. 1D and 2D ultrasonic arrays with high bandwidth and frequencies).
: : Anybody who takes part on the discussion or follows the discussion can profite of the opinions of each other.

: : Thank you very much!

: : Martin Heinz.




 
 Reply 
 
ying qin
ying qin
06:08 Jan-12-2001
Re: Air Coupled UT Market Study
I'm looking for air-coupled Ultrasonic Tranducers used for inspection of composites. It should operate at frequences roughly 200 khz or higher with broadband.

Any help would be appreciated

Thanky und best regards

ying qin

research engineerin, DLR

: : Dear experts,

: : I am collecting any information for doing a market research concerning to NDT based on air coupled UT.
: : For that I would like to start a discussion where I receive your opinions on the numbers of users and applications of air coupled UT in contrast to other ultrasonic testing methods (contact, immersion, water beam coupling). I also would like to receive your opinions of possible future applications for air coupled UT if more advanced probes would be available (e.g. 1D and 2D ultrasonic arrays with high bandwidth and frequencies).
: : Anybody who takes part on the discussion or follows the discussion can profite of the opinions of each other.

: : Thank you very much!

: : Martin Heinz.




 
 Reply 
 

Product Spotlight

ISONIC 3510

Very Powerful Superior Performance Extremely Portable Smart Phased Array Ultrasonic Flaw Detector an
...
d Recorder with 2 Conventional UT and TOFD Channels uniquely combines PA, single- and multi-channel conventional UT, and TOFD modalities providing 100% raw data recording and imaging. Suitable for all kinds of every-day ultrasonic inspections
>

HARDNESS TESTER TKM-459CE combi

TKM-459CE combi applies 2 methods of hardness control: UCI and Leeb. It provides high-accuracy tes
...
ting of metals and alloys as well as items of different sizes and configurations, their hardened layers and galvanic coatings. Device represents results in HB, HRC, HV and others. Shock-, dust- and water-proof housing with intuitive software make this gauge easy to use in all working conditions.
>

Research Center IDEKO develops an ultrasonic train wheel inspection system for CAF

The Basque Research centre IK4-IDEKO has developed a state-of-the-art ultrasonic inspection system f
...
or the train wheel. This system secures a sound condition of train wheels and is thus a significant contribution to rail transport safety. The device was delivered to CAF recently and its use allows the manufacturer to become an approved supplier of rolling stock in Italy, as it meets the demanding homologation standards of this country. \\\\r\\\\n
>

Ultrasonic Testing Immersion Tanks with Unmatched Scanning Features

TecScan’s non-destructive testing Ultrasonic Immersion Tanks & scanners are designed for high pe
...
rformance and demanding NDT testing applications. Our Scan3D™ line of High Precision Immersion Tanks are specifically designed for automated ultrasonic testing of complex composites parts used in aerospace and industrial applications.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window