where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
2383 views
Career Discussions
Nigel Armstrong
Engineering, - Specialist services
United Kingdom, Joined Oct 2000, 1096

Nigel Armstrong

Engineering, - Specialist services
United Kingdom,
Joined Oct 2000
1096
09:42 Aug-04-2007
Vessel Fabrication Inspection Test Plan

I have been asked to produce a generic guide ITP to be supplied to fabricators of ASME VIII vessels. To prevent me reinventing the wheel does anyone have an electronic example (Excel preferably) theu could kindly provide me. You (or I) could remove all traces of point of origin. Please be assured I wont be goofing off playing golf on the time saved, my other rremit is for an ITP taking account of Russian standards requirements.

Please email me if you can help.

Thanks in advance.


 
 Reply 
 
Larry Mullins
Larry Mullins
06:44 Aug-08-2007
Re: Vessel Fabrication Inspection Test Plan
----------- Start Original Message -----------
: I have been asked to produce a generic guide ITP to be supplied to fabricators of ASME VIII vessels. To prevent me reinventing the wheel does anyone have an electronic example (Excel preferably) theu could kindly provide me. You (or I) could remove all traces of point of origin. Please be assured I wont be goofing off playing golf on the time saved, my other rremit is for an ITP taking account of Russian standards requirements.
: Please email me if you can help.
: Thanks in advance.
------------ End Original Message ------------

INSPECTION or EXAMINATION??? - very different things. Inspection is the activities of the AI and or Owner. Examination is the fabricator, and based on Code, TechSpec and QA program. Outlining the minimums of Code examination is easy. The rest is difficult and requires research. You are asking for trouble if you believe it is generic - you stand to miss alot of critical stuff.


 
 Reply 
 
tlang
tlang
08:19 Aug-08-2007
Re: Vessel Fabrication Inspection Test Plan
I have developed Quality programs and inspection test plans for pressure vessel systems before. The ITP program will have to be developed specifically to the activities of the AI and or Owner. As pointed out on the last message posted, the examination is specific to the fabricator based on Code, TechSpec and the QA program.


 
 Reply 
 
umarfaruk
umarfaruk
01:10 Aug-30-2007
Re: Vessel Fabrication Inspection Test Plan
----------- Start Original Message -----------
: I have developed Quality programs and inspection test plans for pressure vessel systems before. The ITP program will have to be developed specifically to the activities of the AI and or Owner. As pointed out on the last message posted, the examination is specific to the fabricator based on Code, TechSpec and the QA program.
------------ End Original Message ------------

can u send me the program im thankfull 2 u




 
 Reply 
 

Product Spotlight

IRIS 9000Plus - Introducing the next generation of heat exchanger inspection.

Representing the seventh generation of the IRIS system, the IRIS 9000 Plus has nearly 200 years of c
...
ombined field inspection experience incorporated in its design. This experience combined with a strong commitment to quality and a history of innovation has made Iris Inspection Services® the undisputed leader in IRIS technology.
>

FMC/TFM

Next generation for Phased Array UT is here now with FMC/TFM! Have higher resolution imaging, impr
...
oved signal to noise ratio, characterize, size and analyze defects better with access to several wave mode views and save raw FMC data for higher quality analysis.  Some of the benefits are:
  • Beautiful Image! Easier to understand what you're looking at
  • Completely focused in entire image or volume
  • Much easier to define setups before inspection
  • Easier to decipher geometry echoes from real defects
  • Oriented defects (e.g. cracks) are imaged better
  • See image from different wave modes from one FMC inspection
  • FMC data can be reprocessed/analyzed without going back to the field
>

NDT Master Lecturer

In the program both university professors and practitioners will give lectures, which guarantees the
...
oretical depth and practical inside. Academic Director: Prof. Dr. Christian Boller
The following lecturers are not complete: Prof. Tadeusz Stepinski, Prof. Wieslaw Staszewski, Prof. Frank Walther, Prof. Giovanni Bruno, Prof. Gerd Dobmann, Prof. Philippe Guy
>

OmniScan™ X3 flaw detector

The OmniScan X3 flaw detector is a complete phased array toolbox. Powerful tools, like total focus
...
ing method (TFM) images and advanced visualization capabilities, enable you to complete your inspection with greater confidence.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window