where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
2430 views
Career Discussions
Nigel Armstrong
Engineering, - Specialist services
United Kingdom, Joined Oct 2000, 1096

Nigel Armstrong

Engineering, - Specialist services
United Kingdom,
Joined Oct 2000
1096
09:42 Aug-04-2007
Vessel Fabrication Inspection Test Plan

I have been asked to produce a generic guide ITP to be supplied to fabricators of ASME VIII vessels. To prevent me reinventing the wheel does anyone have an electronic example (Excel preferably) theu could kindly provide me. You (or I) could remove all traces of point of origin. Please be assured I wont be goofing off playing golf on the time saved, my other rremit is for an ITP taking account of Russian standards requirements.

Please email me if you can help.

Thanks in advance.


 
 Reply 
 
Larry Mullins
Larry Mullins
06:44 Aug-08-2007
Re: Vessel Fabrication Inspection Test Plan
----------- Start Original Message -----------
: I have been asked to produce a generic guide ITP to be supplied to fabricators of ASME VIII vessels. To prevent me reinventing the wheel does anyone have an electronic example (Excel preferably) theu could kindly provide me. You (or I) could remove all traces of point of origin. Please be assured I wont be goofing off playing golf on the time saved, my other rremit is for an ITP taking account of Russian standards requirements.
: Please email me if you can help.
: Thanks in advance.
------------ End Original Message ------------

INSPECTION or EXAMINATION??? - very different things. Inspection is the activities of the AI and or Owner. Examination is the fabricator, and based on Code, TechSpec and QA program. Outlining the minimums of Code examination is easy. The rest is difficult and requires research. You are asking for trouble if you believe it is generic - you stand to miss alot of critical stuff.


 
 Reply 
 
tlang
tlang
08:19 Aug-08-2007
Re: Vessel Fabrication Inspection Test Plan
I have developed Quality programs and inspection test plans for pressure vessel systems before. The ITP program will have to be developed specifically to the activities of the AI and or Owner. As pointed out on the last message posted, the examination is specific to the fabricator based on Code, TechSpec and the QA program.


 
 Reply 
 
umarfaruk
umarfaruk
01:10 Aug-30-2007
Re: Vessel Fabrication Inspection Test Plan
----------- Start Original Message -----------
: I have developed Quality programs and inspection test plans for pressure vessel systems before. The ITP program will have to be developed specifically to the activities of the AI and or Owner. As pointed out on the last message posted, the examination is specific to the fabricator based on Code, TechSpec and the QA program.
------------ End Original Message ------------

can u send me the program im thankfull 2 u




 
 Reply 
 

Product Spotlight

iProbe - USB Phased Array Probe

Turn your PC, Laptop or Tablet into a powerful 32:64 Phased Array system with our USB powered Phas
...
ed Array iProbe and inspection software package. Perform affordable weld inspection and corrosion mapping inspections with this powerful but small system. The probe has a 100V pulser, 8K PRF, dual axis encoder input and achieves outstanding signal quality.
>

32:128PR PAUT & 2-ch TOFD Flaw Detector: SyncScan 2

●32:128PR PAUT with optional 2-ch TOFD to maximize your efficiency ●Support PR mode for corrosi
...
on inspection ●Multiple solutions for welds & corrosion ●Faster scan speed (Approximately 3 meters/minute) ●Light weight: 4kg only including battery
>

Conformable wedge transducer

The conformability is obtained with a flexible membrane filled with water between the transducer and
...
the inspected component. The coupling between the membrane and the component requires a small quantity of water or couplant. The conformable wedge combines the acoustic performance of immersion technique with good coupling and low attenuation.
>

GUL Subsea Solutions - Screeening & Monitoring

To inspect new and existing subsea lines, you need proven technology and experience. GUL offers it's
...
technology to solve this challenge: GUL Subsea and gMAT Transducer Rings.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window