The Largest Open Access Portal of Nondestructive Testing (NDT)

679 views Career Discussions vladimir perez vladimir perez 02:53 Sep-28-2007 multi echo Hi everybody...........I'd like to know about "use of multi-echo equipment" to make thickness measurements on coatings. Please, can someone send any informations about that? please send at: enimsa.tpa@gmail.com thanks Eng. Vladimir Perez P.    Reply  Translate  Close   Tom Nelligan Engineering, retired, USA, Joined Nov 1998, 390 Tom Nelligan Engineering, retired, USA, Joined Nov 1998 390 06:08 Oct-01-2007 Re: multi echo Multi-echo measurement, more commonly known as echo-to-echo measurement, is a technique that is available on many ultrasonic thickness gages and flaw detectors, used to measure the thickness of a metal substrate beneath a non-metallic coating without including the coating thickness. In that sort of situation (like thick paint over a steel pipe), there will be multiple backwall echoes from the metal but only a single echo from the coating. The time interval between any two of the metal backwall echoes represents one round trip of the sound wave in the metal, so by measuring that interval the instrument measures the metal thickness only.    Reply  Translate  Close

Product Spotlight Research and Application Development For NDT StandECLIPSE SCIENTIFIC Acuren’s Research and Application Development specializes in the development of advanced ultraso ... nic inspection techniques and systems for challenging inspection applications, with an emphasis on practical solutions which are field deployable. Services include manual and automated ultrasonic inspection system development, inspection technique optimization using laboratory scale studies and ultrasonic modeling (CIVA, BeamTool), preparing technical justification for technique evaluation and qualification (Probability of Detection and sizing accuracy studies), inspection/calibration/analysis procedure preparation to support field deployment of custom techniques, and development of custom imaging algorithms to support challenging inspection applications. > 3 Showcases5 Videos CIVA 2020 UT Module StandEXTENDE CIVA NDE Simulation Software is the world leader of NDT Simulation. The UT simulation Module incl ... udes: - "Beam computation": Beam propagation simulation - "Inspection Simulation": Beam interaction with flaws or specimens The user can simulate a whole inspection process (pulse echo, tandem or TOFD) with a wide range of probes (conventional, Phased- arrays or EMAT), components, and flaws. > 6 Showcases24 Videos Ultrasonic Probe Recharacterization Service StandNDT Systems, Inc. NDT Systems offers a comprehensive Aftercare and Recharacterization Service for all our ultrasonic ... probes. The Recharacterization Service is fully compliant with International ASTM E1065 Standard Guide (and other applicable standards) and offers complete documentation, traceable to the ASTM E1065 Standard. For more details or to schedule Recharacterization Services contact ndtsales@ndtsystems.com > 5 Showcases Sci Aps Z-Series Portable Handheld Analysers StandGammatec NDT Supplies SOC Ltd The world’s only handheld analyzer that measures carbon content in stainless (yes even L-grades),s ... teels, and cast irons. Also accepted for low Si analysis for sulfidic corrosion analysis, and is widely used in the power industry for Cr analysis, for flow accelerated corrosion applications. > 5 Showcases5 Videos more Showcases

Share...

• Home
• Exhibition
• Archive
• Forum
• Jobs
• Members
• Events
• Directory
• NDT A-Z

• Advertise
• Privacy Policy
• Contact & Imprint
• About

© NDT.net - Where expertise comes together. The Largest Open Access Portal of Nondestructive Testing (NDT)- since 1996