where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

1159 views
Technical Discussions
David Davies
Level III , QA Engineer , Ops. Supervisor
Vetco Saudi Arabia Ltd, Saudi Arabia, Joined Sep 2000, 3

David Davies

Level III , QA Engineer , Ops. Supervisor
Vetco Saudi Arabia Ltd,
Saudi Arabia,
Joined Sep 2000
3
01:02 Oct-12-2000
Automated UT of pipelines

I am evaluating a project for automated UT of cross country pipeline girth welds. Can anyone give me their experiences with the various options available, particularly capabilities, reliability, approval by certification bodies. I have a lot of experience with manual UT but need help with the latest automated equipment.
I am starting from scratch on this project so any pointers or contacts would be appreciated.
Thanks
Dave Davies


    
 
 
Doug Breeze
Director, Consultant; R&D
Inspection Software Limited, United Kingdom, Joined May 2000, 20

Doug Breeze

Director, Consultant; R&D
Inspection Software Limited,
United Kingdom,
Joined May 2000
20
01:22 Oct-13-2000
Re: Automated UT of pipelines
Trying to get on-the-record objective views from
users of automatad equipment must be like asking
a preacher which is the best God.

My comments are no more objective than anyone else's,
but they are based on field experience with several
automated systems (some nuclear, some pipelines,
some in the Saudi desert), but there are several
common principles to look for.

The Equipment
-------------
1. Look at the suppliers reputation and track record.
2. Look for the very best mechanical design...
(ruggedness, mechanical backlash, precision,
exposure/protection, connections, etc.)
3. Look for flexibility and versatilty in the software,
best performance in the electronics, and for a
range of scanners... whatever you plan to examine
now, you'll need to do something different soon
enough.
4. Plan for regular maintenance schedules (sometimes
daily in the desert), and determine how readily the
systems strip apart for cleaning and maintenance.


The Operators
-------------
1. Automated kit needs to be loved, by dedicated, well
qualifed operators. Don't be misled into planning
to use lesser grade personnel.
2. Aim to employ multi-discipline supervisors with
competence in UT, electronics, mechanics,
computers, etc., and with practical skills too.
3. Plan to have the operators fully trained in
operation AND maintenance, by the manufacturer.

Trust this helps.


    
 
 
John O'Brien
Consultant, -
Chevron ETC , USA, Joined Jan 2000, 278

John O'Brien

Consultant, -
Chevron ETC ,
USA,
Joined Jan 2000
278
01:50 Oct-18-2000
Re: Automated UT of pipelines
Most of the providers are following the zonal approach originally developed out of Canada (Ed Ginzel whose input you will often see on NDTNET) was a leading figure in this.

Some systems add in TOFD as an extra channel for detection but sizing is still mainly Pulse Echo with cross talking probes focussed on different weld zones.

RD tech, AIS/Weldsonix, RTD, Vincotte, SSI SGS Gottfeld all use similar approaches.

The technique is well accepted in many areas now Canada, Gulf Of Mexico, Gaz De France, Petrobras etc. etc.

University Of Ghent in Belgium has been running and assessment project including the application and comparison of Phased Array technology which is seen by some as the next direction.

Acceptance Criteria is the biggest issue people like NOVA have direct specs now but API 11.04 does not and you need to consider the FFS Appendix and an ECA for determining new accepatnce criteria.

If procuring equipment other issues come into play such as reliability.

We have assisted in development projects in this area so if you need direct input please contact me.




    
 
 
Tim Sun
Tim Sun
08:28 Oct-23-2000
Re: Automated UT of pipelines



    
 
 
Michael Moles
, Joined ,
01:13 Nov-03-2000
Re: Automated UT of pipelines
: I am evaluating a project for automated UT of cross country pipeline girth welds. Can anyone give me their experiences with the various options available, particularly capabilities, reliability, approval by certification bodies. I have a lot of experience with manual UT but need help with the latest automated equipment.
: I am starting from scratch on this project so any pointers or contacts would be appreciated.
: Thanks

R/D Tech manufactures a phased array system for inspecting girth welds, called PipeWIZARD. There are several references at conferences (e.g. ASNT) as well as electronic versions (see 15 WCNDT). Phased arrays have major advantages over conventional systems: smaller; lighter; can scan from 4" to 56"with same arrays; load a sset-up electronically; increased number of zones for better sizing etc. Check our web site.
: Dave Davies




    
 
 
Thomas S Connelly
Thomas S Connelly
09:44 Nov-28-2000
Re: Automated UT of pipelines
: I am evaluating a project for automated UT of cross country pipeline girth welds. Can anyone give me their experiences with the various options available, particularly capabilities, reliability, approval by certification bodies. I have a lot of experience with manual UT but need help with the latest automated equipment.
: I am starting from scratch on this project so any pointers or contacts would be appreciated.
: Thanks
: Dave Davies

One should be very careful when selecting the Company, in areas like experience, equipment, prosed sizing method, spares etc.

It would also be invaluable to send your proposed specifications to the companies and determine how they will meet the specification. A validation of the companies using defective welds would also help.

Determine the flaw sizing methods to be used i.e. Zonal, amplitude, combination and any other.

beware of how companies or individuals attempt to apply the appendix of API 1104. Monitor carefully how the company intend to apply workmanship standards.

Certain consultants or field experts may wish to overcomplicate AUT it does not have to be over elaborate but MUST be adequate for the required inspection project.

My employers offer a full consulting and quality service for mechanized UT including field and online (remote) audit, validations, qualification etc

Regards

T. S. Connelly




    
 
 
Steve Jones
, Joined ,

Steve Jones

,
Joined

06:10 Nov-29-2000
Re: Automated UT of pipelines



    
 
 

Product Spotlight

Echomac® Small

Available with up to eight channels of electronics to detect and evaluate thickness, flaws and eccen
...
tricity, this UT tester is housed in a convenient, smaller cabinet. This instrument can be used in conjunction with bubbler or immersion tank systems, or with a test bench or in laboratory applications. The Echomac® Small is available in the FD4, FD6 or FD6A versions.
>

Teletest Focus+

Teletest Focus+ electronics have superior capabilities than rivals on the market. Beyond the usual
...
test features, Focus+ has 24 transmit channels and 24 receive channels, with an additional on-board switching capabilities. The instrument's frequency range is 10–300 kHz.
>

NEW - TD Focus-ScanRX

The NEW Next Generation Advanced UT platform, TD Focus ScanRX - Also available as a card stack solut
...
ion. Key Improvements 1. Data acquisition is significantly faster than current design 2. Better aesthetic – closely aligns with HandyScan RX 3. Improved IP rating (Target IP66) 4. Ruggedized housing 5. Connectors are protected from impact and ingress 6. Integrated stand and separate retractable handle easy to keep clean) 7. Touchscreen with ruggedized display glass 8. 3-Axis encoder input
>

MUSE Mobile Ultrasonic Equipment

The MUSE, a portable ultrasonic imaging system, was developed for in-field inspections of light-weig
...
ht structures. The MUSE consists of a motor-driven manipulator, a water circulation system for the acoustic coupling and a portable ultrasonic flaw detector (USPC 3010). The MUSE provides images of internal defects (A-, B-,C- and D-scan).
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window