where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

941 views
Career Discussions
Jason Juarez
Jason Juarez
08:15 Oct-24-2007
Working without IRRSP

My empolyer wants me to do a job on the border of California and Arizona. I don't have an IRRSP cert. Is there any possible way that I could still do this job out of state?


 
 Reply 
 
Mark Thompson
Mark Thompson
03:51 Oct-24-2007
Re: Working without IRRSP
----------- Start Original Message -----------
: My empolyer wants me to do a job on the border of California and Arizona. I don't have an IRRSP cert. Is there any possible way that I could still do this job out of state?
------------ End Original Message ------------

All states require IRRSP. You should not be working with Isotopes without that cert. You and your employer risk fines by the NRC.


 
 Reply 
 
Scott Cargill
Scott Cargill
05:15 Nov-30-2007
Re: Working without IRRSP
----------- Start Original Message -----------
: : My empolyer wants me to do a job on the border of California and Arizona. I don't have an IRRSP cert. Is there any possible way that I could still do this job out of state?
: All states require IRRSP. You should not be working with Isotopes without that cert. You and your employer risk fines by the NRC.
------------ End Original Message ------------

Acutally that is incorrect. California does NOT require a state card yet. California is still working on putting its program together.

IRRSP / State Card is only required under NRC jurisdiction ie Miltary Bases.




 
 Reply 
 
Mark Thompson
Mark Thompson
01:18 Dec-01-2007
Re: Working without IRRSP
----------- Start Original Message -----------
: : : My empolyer wants me to do a job on the border of California and Arizona. I don't have an IRRSP cert. Is there any possible way that I could still do this job out of state?
: : All states require IRRSP. You should not be working with Isotopes without that cert. You and your employer risk fines by the NRC.
: Acutally that is incorrect. California does NOT require a state card yet. California is still working on putting its program together.
: IRRSP / State Card is only required under NRC jurisdiction ie Miltary Bases.
------------ End Original Message ------------

Here is a link to the NRC for your information http://www.nrc.gov/reading-rm/doc-collections/gen-comm/info-notices/1999/in99022.html




 
 Reply 
 

Product Spotlight

Compact NDT inspection-heads for measurements with active thermography

The compact inspection head is suitable for thermographic ndt tasks. The uncooled infrared camera
...
is specially developed for NDI-tasks and offers a thermal sensitivity until now known only from thermal imagers with cooled detector. All required components and functions are integrated into the inspection-head. You will only need an ethernet cable to connect the sensor with the evaluation system.
>

PAUT Probes

Typical Phased Array probes have frequencies between 1MHz and 20MHz and the number of wafers is 10
...
to 128. M2 Electronics offers customers conventionally ultrasound probes and the ability to provide high-precision Phased Array Ultrasound Probes of up to 256 wafers. We can also customize the probe for our customers to meet the specific application requirements of the user.
>

Robotic laser shearography enables 100% inspection of complex, flight-critical composite structures

An article in “Composites World Magazine” showcases Non Destructive Testing of aero-structures
...
with Laser Shearography. Over the years Dantec Dynamics has supplied many solutions for the aerospace industry. Referring to specific customer projects several of these cases are examined to outline the advantages of using Laser Shearography for automated defect detection.
>

32:128PR PAUT & 2-ch TOFD Flaw Detector: SyncScan 2

●32:128PR PAUT with optional 2-ch TOFD to maximize your efficiency ●Support PR mode for corrosi
...
on inspection ●Multiple solutions for welds & corrosion ●Faster scan speed (Approximately 3 meters/minute) ●Light weight: 4kg only including battery
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window