where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

GB Inspection Systems Ltd.
A leading UK manufacturer of Ultrasonic Probes, Accessories, Supplier of NDT Equipment and more.
879 views
Career Discussions
Asif
Consultant, - NDT/QA
Pakistan, Joined Nov 2008, 1

Asif

Consultant, - NDT/QA
Pakistan,
Joined Nov 2008
1
02:28 Jun-12-2008
National Recognize NDT Personnel Qualification Practice

Dear Experts,

Guide me about the following

National Recognize NDT Personnel Qualification Practice

Thanks


 
 Reply 
 
S.V.Swamy
Engineering, - Material Testing Inspection & Quality Control
Retired from Nuclear Fuel Complex , India, Joined Feb 2001, 787

S.V.Swamy

Engineering, - Material Testing Inspection & Quality Control
Retired from Nuclear Fuel Complex ,
India,
Joined Feb 2001
787
02:41 Jun-12-2008
Re: National Recognize NDT Personnel Qualification Practice
----------- Start Original Message -----------
: Dear Experts,
: Guide me about the following
: National Recognize NDT Personnel Qualification Practice
: Thanks
------------ End Original Message ------------

Dear Asif,

Each country has its own National Standard for Training and Certification of NDT personnel. For example in India, Indian Society for Non-Destructive Testing is the Body (through its National Certification Board) to train and certify the NDT personnel. In USA, ASNT is the certifying body. In Canada, there is a different body.

Please write where you are residing and where you are presently working. Some countries in the middle east accept ASNT Certification.




 
 Reply 
 
Alan
Alan
03:30 Jun-15-2008
Re: National Recognize NDT Personnel Qualification Practice
I am surprised by some of the comments regarding both PCN and CSWIP. I believe that TWI have recently opened a training centre in North America where both PCN and CSWIP training and exams will be conducted, this must indicate there is a need for both PCN and CSWIP within North America the home of ASNT. having qualified to both PCN and ASNT Level 3 in a number of disciplines I personally found the PCN examinations far more demading.
My present role involves auditing NDT companies around the world, one my findings is that during the audit of personnel qualifications an individual may be found not to be qualified in a specific discilpline. When continuing the audit process the following day an ASNT Level II certificate will have appeared in the file of the previously un-qualified person. This can hardly be considered as good practice where a level II qualification can be obtained over night.
I believe the origin of the qualification is of little relevance so lond as the operator is capable of carrying out and interpreting the result of an inspection.
----------- Start Original Message -----------
: : Dear Experts,
: : Guide me about the following
: : National Recognize NDT Personnel Qualification Practice
: : Thanks
: Dear Asif,
: Each country has its own National Standard for Training and Certification of NDT personnel. For example in India, Indian Society for Non-Destructive Testing is the Body (through its National Certification Board) to train and certify the NDT personnel. In USA, ASNT is the certifying body. In Canada, there is a different body.
: Please write where you are residing and where you are presently working. Some countries in the middle east accept ASNT Certification.
------------ End Original Message ------------




 
 Reply 
 
Michel Couture
NDT Inspector,
consultant, Canada, Joined Sep 2006, 851

Michel Couture

NDT Inspector,
consultant,
Canada,
Joined Sep 2006
851
07:35 Jun-15-2008
Re: National Recognize NDT Personnel Qualification Practice
Well people,

If I may, I would like to add a few comments to this, yet I'm not familiar with PCN or CSWIP and I think it will go along with the little stir we had on a previous post with a similar topic.

I do believe that with ASNT, there is 2 kinds of certification. One being the TC-1A and the other being the ACCP. The TC-1A is administered by the employer and as someone mentionned before depending of the employer, it may appear overnight during and audit! The other (ACCP) is administered by a national body (ie ASNT) and therefore a little harder to get and with better control.

Personnaly, I believe that no matter which country you are from, a goverment issued certification as pretty well equivalent from one country to another . Specially if the country has adopted the ISO Standards. Like many of the codes we work with, I believe they are to a degree multiplication of each other.

When it comes to the ASTN TC- 1A, it another matter. Like I said, it is controlled by the employer. Some of them,are more leaniant than others and believe that it is only meant to make their life and operation difficult. The other reason I don't like this certification is that it holds the technician hostage to a company because you loose the certification when you leave. The company may also use this tool to withold employee in low wage position if the TC-1A is all you hold for certification.

Cheerios,

Michel

----------- Start Original Message -----------
: I am surprised by some of the comments regarding both PCN and CSWIP. I believe that TWI have recently opened a training centre in North America where both PCN and CSWIP training and exams will be conducted, this must indicate there is a need for both PCN and CSWIP within North America the home of ASNT. having qualified to both PCN and ASNT Level 3 in a number of disciplines I personally found the PCN examinations far more demading.
: My present role involves auditing NDT companies around the world, one my findings is that during the audit of personnel qualifications an individual may be found not to be qualified in a specific discilpline. When continuing the audit process the following day an ASNT Level II certificate will have appeared in the file of the previously un-qualified person. This can hardly be considered as good practice where a level II qualification can be obtained over night.
: I believe the origin of the qualification is of little relevance so lond as the operator is capable of carrying out and interpreting the result of an inspection.
: : : Dear Experts,
: : : Guide me about the following
: : : National Recognize NDT Personnel Qualification Practice
: : : Thanks
: : Dear Asif,
: : Each country has its own National Standard for Training and Certification of NDT personnel. For example in India, Indian Society for Non-Destructive Testing is the Body (through its National Certification Board) to train and certify the NDT personnel. In USA, ASNT is the certifying body. In Canada, there is a different body.
: : Please write where you are residing and where you are presently working. Some countries in the middle east accept ASNT Certification.
------------ End Original Message ------------




 
 Reply 
 

Product Spotlight

EKOSCAN Phased Array

In order to always fit your needs, EKOSCAN can manufacture any type of UT transducer, either convent
...
ional or Phased Array. As an ISO 9001: 2015 certified company, EKOSCAN is extremely careful as far a material selection and manufacturing processes are concerned. Our probes guarantee our customers the benefits of latest innovations regarding piezo-composite, backing, impedance adaptation layer, etc. Specific probes for hostile environment: high temperature, high pressure, corrosive environment,etc. Specific probes designed to fit your specific application: optimization of every parameter to guarantee you the best detection.
>

NovaScope 6000

The all-digital Novascope 6000 is a portable, ultra-high precision thickness gauge for high-speed
...
thickness measurement. Novascope 6000 has unmatched capabilities and unique features including: •Superior Resolution with high contrast, high-speed color RF display •High pulser voltage •Real-time video output •Increased internal/external data storage •Programmable SetUp features •Battery & AC Powered
>

Echomac® Small

Available with up to eight channels of electronics to detect and evaluate thickness, flaws and eccen
...
tricity, this UT tester is housed in a convenient, smaller cabinet. This instrument can be used in conjunction with bubbler or immersion tank systems, or with a test bench or in laboratory applications. The Echomac® Small is available in the FD4, FD6 or FD6A versions.
>

iProbe - USB Phased Array Probe

Turn your PC, Laptop or Tablet into a powerful 32:64 Phased Array system with our USB powered Phas
...
ed Array iProbe and inspection software package. Perform affordable weld inspection and corrosion mapping inspections with this powerful but small system. The probe has a 100V pulser, 8K PRF, dual axis encoder input and achieves outstanding signal quality.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window