where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

Vallen-Systeme GmbH
The Acoustic Emission Company! Since 1987 Vallen stands for competence and continuity in AE and for reliable business cooperation and support.

911 views
Career Discussions
Asif
Consultant, - NDT/QA
Pakistan, Joined Nov 2008, 1

Asif

Consultant, - NDT/QA
Pakistan,
Joined Nov 2008
1
02:28 Jun-12-2008
National Recognize NDT Personnel Qualification Practice

Dear Experts,

Guide me about the following

National Recognize NDT Personnel Qualification Practice

Thanks


 
 Reply 
 
S.V.Swamy
Engineering, - Material Testing Inspection & Quality Control
Retired from Nuclear Fuel Complex , India, Joined Feb 2001, 787

S.V.Swamy

Engineering, - Material Testing Inspection & Quality Control
Retired from Nuclear Fuel Complex ,
India,
Joined Feb 2001
787
02:41 Jun-12-2008
Re: National Recognize NDT Personnel Qualification Practice
----------- Start Original Message -----------
: Dear Experts,
: Guide me about the following
: National Recognize NDT Personnel Qualification Practice
: Thanks
------------ End Original Message ------------

Dear Asif,

Each country has its own National Standard for Training and Certification of NDT personnel. For example in India, Indian Society for Non-Destructive Testing is the Body (through its National Certification Board) to train and certify the NDT personnel. In USA, ASNT is the certifying body. In Canada, there is a different body.

Please write where you are residing and where you are presently working. Some countries in the middle east accept ASNT Certification.




 
 Reply 
 
Alan
Alan
03:30 Jun-15-2008
Re: National Recognize NDT Personnel Qualification Practice
I am surprised by some of the comments regarding both PCN and CSWIP. I believe that TWI have recently opened a training centre in North America where both PCN and CSWIP training and exams will be conducted, this must indicate there is a need for both PCN and CSWIP within North America the home of ASNT. having qualified to both PCN and ASNT Level 3 in a number of disciplines I personally found the PCN examinations far more demading.
My present role involves auditing NDT companies around the world, one my findings is that during the audit of personnel qualifications an individual may be found not to be qualified in a specific discilpline. When continuing the audit process the following day an ASNT Level II certificate will have appeared in the file of the previously un-qualified person. This can hardly be considered as good practice where a level II qualification can be obtained over night.
I believe the origin of the qualification is of little relevance so lond as the operator is capable of carrying out and interpreting the result of an inspection.
----------- Start Original Message -----------
: : Dear Experts,
: : Guide me about the following
: : National Recognize NDT Personnel Qualification Practice
: : Thanks
: Dear Asif,
: Each country has its own National Standard for Training and Certification of NDT personnel. For example in India, Indian Society for Non-Destructive Testing is the Body (through its National Certification Board) to train and certify the NDT personnel. In USA, ASNT is the certifying body. In Canada, there is a different body.
: Please write where you are residing and where you are presently working. Some countries in the middle east accept ASNT Certification.
------------ End Original Message ------------




 
 Reply 
 
Michel Couture
NDT Inspector,
consultant, Canada, Joined Sep 2006, 891

Michel Couture

NDT Inspector,
consultant,
Canada,
Joined Sep 2006
891
07:35 Jun-15-2008
Re: National Recognize NDT Personnel Qualification Practice
Well people,

If I may, I would like to add a few comments to this, yet I'm not familiar with PCN or CSWIP and I think it will go along with the little stir we had on a previous post with a similar topic.

I do believe that with ASNT, there is 2 kinds of certification. One being the TC-1A and the other being the ACCP. The TC-1A is administered by the employer and as someone mentionned before depending of the employer, it may appear overnight during and audit! The other (ACCP) is administered by a national body (ie ASNT) and therefore a little harder to get and with better control.

Personnaly, I believe that no matter which country you are from, a goverment issued certification as pretty well equivalent from one country to another . Specially if the country has adopted the ISO Standards. Like many of the codes we work with, I believe they are to a degree multiplication of each other.

When it comes to the ASTN TC- 1A, it another matter. Like I said, it is controlled by the employer. Some of them,are more leaniant than others and believe that it is only meant to make their life and operation difficult. The other reason I don't like this certification is that it holds the technician hostage to a company because you loose the certification when you leave. The company may also use this tool to withold employee in low wage position if the TC-1A is all you hold for certification.

Cheerios,

Michel

----------- Start Original Message -----------
: I am surprised by some of the comments regarding both PCN and CSWIP. I believe that TWI have recently opened a training centre in North America where both PCN and CSWIP training and exams will be conducted, this must indicate there is a need for both PCN and CSWIP within North America the home of ASNT. having qualified to both PCN and ASNT Level 3 in a number of disciplines I personally found the PCN examinations far more demading.
: My present role involves auditing NDT companies around the world, one my findings is that during the audit of personnel qualifications an individual may be found not to be qualified in a specific discilpline. When continuing the audit process the following day an ASNT Level II certificate will have appeared in the file of the previously un-qualified person. This can hardly be considered as good practice where a level II qualification can be obtained over night.
: I believe the origin of the qualification is of little relevance so lond as the operator is capable of carrying out and interpreting the result of an inspection.
: : : Dear Experts,
: : : Guide me about the following
: : : National Recognize NDT Personnel Qualification Practice
: : : Thanks
: : Dear Asif,
: : Each country has its own National Standard for Training and Certification of NDT personnel. For example in India, Indian Society for Non-Destructive Testing is the Body (through its National Certification Board) to train and certify the NDT personnel. In USA, ASNT is the certifying body. In Canada, there is a different body.
: : Please write where you are residing and where you are presently working. Some countries in the middle east accept ASNT Certification.
------------ End Original Message ------------




 
 Reply 
 

Product Spotlight

ISONIC 3510

Very Powerful Superior Performance Extremely Portable Smart Phased Array Ultrasonic Flaw Detector an
...
d Recorder with 2 Conventional UT and TOFD Channels uniquely combines PA, single- and multi-channel conventional UT, and TOFD modalities providing 100% raw data recording and imaging. Suitable for all kinds of every-day ultrasonic inspections
>

Research Center IDEKO develops an ultrasonic train wheel inspection system for CAF

The Basque Research centre IK4-IDEKO has developed a state-of-the-art ultrasonic inspection system f
...
or the train wheel. This system secures a sound condition of train wheels and is thus a significant contribution to rail transport safety. The device was delivered to CAF recently and its use allows the manufacturer to become an approved supplier of rolling stock in Italy, as it meets the demanding homologation standards of this country. \\\\r\\\\n
>

Eddy Current inspection : RotoETscan Rotating Head

The rotating head RotoETscan detects the presence of longitudinal surface or sub surface defects a
...
t high speed. The rotating head is often installed directly on the production line. It is generally dedicated to the control of long products such as tubes, bars and wires, made of ferrous or non-ferrous material. It can also be used for inspection of small parts (billets).
>

MUSE Mobile Ultrasonic Equipment

The MUSE, a portable ultrasonic imaging system, was developed for in-field inspections of light-weig
...
ht structures. The MUSE consists of a motor-driven manipulator, a water circulation system for the acoustic coupling and a portable ultrasonic flaw detector (USPC 3010). The MUSE provides images of internal defects (A-, B-,C- and D-scan).
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window