where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

DASEL SISTEMAS
Our Phased Array equipments, based on SITAU Technology, are among the PAS highest performance in the market.
1349 views
Career Discussions
Michel Couture
NDT Inspector,
consultant, Canada, Joined Sep 2006, 847

Michel Couture

NDT Inspector,
consultant,
Canada,
Joined Sep 2006
847
07:37 Jun-15-2008
NDT Rope Access Inspector

Can someone enlighten me? I've been in the industry for about 20 years and yet don't know what is a NDT Rope Access Inspector.

Cheerios,
Michel


    
 
 Reply 
 
alex g
alex g
05:21 Jun-16-2008
Re: NDT Rope Access Inspector
Michel, just a little enlightenment to you.
NDT Rope access inspectors are the NDT technicians who are not using any scaffoldings or any type of platforms in doing NDT works especially in ultrasonic testing. They are trained to use Rope in accessing difficult places like towers, piperacks, smokestacks, offshore structures and even the high rise buildings. It is similar to people who are doing rock climbings. In short, they are the cliffhangers with NDT qualifications.

cheers,
alex


----------- Start Original Message -----------
: Can someone enlighten me? I've been in the industry for about 20 years and yet don't know what is a NDT Rope Access Inspector.
: Cheerios,
: Michel
------------ End Original Message ------------




    
 
 Reply 
 
Michel Couture
NDT Inspector,
consultant, Canada, Joined Sep 2006, 847

Michel Couture

NDT Inspector,
consultant,
Canada,
Joined Sep 2006
847
08:25 Jun-16-2008
Re: NDT Rope Access Inspector
So, it's similar to the accoutrement I had during my army life!!! Do you need special training for this? Thanks for the enlightment,
Michel

----------- Start Original Message -----------
: Michel, just a little enlightenment to you.
: NDT Rope access inspectors are the NDT technicians who are not using any scaffoldings or any type of platforms in doing NDT works especially in ultrasonic testing. They are trained to use Rope in accessing difficult places like towers, piperacks, smokestacks, offshore structures and even the high rise buildings. It is similar to people who are doing rock climbings. In short, they are the cliffhangers with NDT qualifications.
: cheers,
: alex
:
: : Can someone enlighten me? I've been in the industry for about 20 years and yet don't know what is a NDT Rope Access Inspector.
: : Cheerios,
: : Michel
------------ End Original Message ------------




    
 
 Reply 
 
Joe Buckley
Consultant, ASNT L-III, Honorary Secretary of BINDT
Level X NDT, BINDT, United Kingdom, Joined Oct 1999, 522

Joe Buckley

Consultant, ASNT L-III, Honorary Secretary of BINDT
Level X NDT, BINDT,
United Kingdom,
Joined Oct 1999
522
09:33 Jun-16-2008
Re: NDT Rope Access Inspector
Check out

http://www.irata.org/training_courses.htm

Joe


----------- Start Original Message -----------
: So, it's similar to the accoutrement I had during my army life!!! Do you need special training for this? Thanks for the enlightment,
: Michel
: : Michel, just a little enlightenment to you.
: : NDT Rope access inspectors are the NDT technicians who are not using any scaffoldings or any type of platforms in doing NDT works especially in ultrasonic testing. They are trained to use Rope in accessing difficult places like towers, piperacks, smokestacks, offshore structures and even the high rise buildings. It is similar to people who are doing rock climbings. In short, they are the cliffhangers with NDT qualifications.
: : cheers,
: : alex
: :
: : : Can someone enlighten me? I've been in the industry for about 20 years and yet don't know what is a NDT Rope Access Inspector.
: : : Cheerios,
: : : Michel
------------ End Original Message ------------




    
 
 Reply 
 
Wolfgang
NDT Inspector, - Rotorblade Engineering
HMS Sachverständigenbüro Dr. Holstein, Germany, Joined May 2003, 2

Wolfgang

NDT Inspector, - Rotorblade Engineering
HMS Sachverständigenbüro Dr. Holstein,
Germany,
Joined May 2003
2
00:35 Jun-16-2008
Re: NDT Rope Access Inspector
----------- Start Original Message -----------
: Can someone enlighten me? I've been in the industry for about 20 years and yet don't know what is a NDT Rope Access Inspector.
: Cheerios,
: Michel
------------ End Original Message ------------

.. and do not forget the wind turbine blade inspectors using tap testing for NDT method and make defect selective imaging. It is a fast growing sector of challenging alpine type rope climbing inspections - but also problematic: sometimes brave guys climb like monkeys but do they know how to validate what they see?
Regards, Wolfgang




    
 
 Reply 
 
Michel Couture
NDT Inspector,
consultant, Canada, Joined Sep 2006, 847

Michel Couture

NDT Inspector,
consultant,
Canada,
Joined Sep 2006
847
01:14 Jun-19-2008
Re: NDT Rope Access Inspector
Thank you gentlemen for you input, I'll check out the reference given.

Cheerios,

Michel
----------- Start Original Message -----------
: Can someone enlighten me? I've been in the industry for about 20 years and yet don't know what is a NDT Rope Access Inspector.
: Cheerios,
: Michel
------------ End Original Message ------------




    
 
 Reply 
 

Product Spotlight

FMC/TFM

Next generation for Phased Array UT is here now with FMC/TFM! Have higher resolution imaging, impr
...
oved signal to noise ratio, characterize, size and analyze defects better with access to several wave mode views and save raw FMC data for higher quality analysis.  Some of the benefits are:
  • Beautiful Image! Easier to understand what you're looking at
  • Completely focused in entire image or volume
  • Much easier to define setups before inspection
  • Easier to decipher geometry echoes from real defects
  • Oriented defects (e.g. cracks) are imaged better
  • See image from different wave modes from one FMC inspection
  • FMC data can be reprocessed/analyzed without going back to the field
>

Teletest Focus+

Teletest Focus+ electronics have superior capabilities than rivals on the market. Beyond the usual
...
test features, Focus+ has 24 transmit channels and 24 receive channels, with an additional on-board switching capabilities. The instrument's frequency range is 10–300 kHz.
>

UCI Hardness Tester NOVOTEST T-U2

UCI hardness tester NOVOTEST T-U2 is is used for non-destructive hardness testing of: metals and
...
alloys by scales of hardness: Rockwell (HRC), Brinell (HB), Vickers (HV); non-ferrous metals, alloys of iron etc., and using five additional scales for calibration; with tensile strength (Rm) scale determines the tensile strength of carbon steel pearlitic products by automatic recalculation from Brinell (HB) hardness scale.
>

Compact NDT inspection-heads for measurements with active thermography

The compact inspection head is suitable for thermographic ndt tasks. The uncooled infrared camera
...
is specially developed for NDI-tasks and offers a thermal sensitivity until now known only from thermal imagers with cooled detector. All required components and functions are integrated into the inspection-head. You will only need an ethernet cable to connect the sensor with the evaluation system.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window