where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
1382 views
Career Discussions
Michel Couture
NDT Inspector,
consultant, Canada, Joined Sep 2006, 889

Michel Couture

NDT Inspector,
consultant,
Canada,
Joined Sep 2006
889
07:37 Jun-15-2008
NDT Rope Access Inspector

Can someone enlighten me? I've been in the industry for about 20 years and yet don't know what is a NDT Rope Access Inspector.

Cheerios,
Michel


 
 Reply 
 
alex g
alex g
05:21 Jun-16-2008
Re: NDT Rope Access Inspector
Michel, just a little enlightenment to you.
NDT Rope access inspectors are the NDT technicians who are not using any scaffoldings or any type of platforms in doing NDT works especially in ultrasonic testing. They are trained to use Rope in accessing difficult places like towers, piperacks, smokestacks, offshore structures and even the high rise buildings. It is similar to people who are doing rock climbings. In short, they are the cliffhangers with NDT qualifications.

cheers,
alex


----------- Start Original Message -----------
: Can someone enlighten me? I've been in the industry for about 20 years and yet don't know what is a NDT Rope Access Inspector.
: Cheerios,
: Michel
------------ End Original Message ------------




 
 Reply 
 
Michel Couture
NDT Inspector,
consultant, Canada, Joined Sep 2006, 889

Michel Couture

NDT Inspector,
consultant,
Canada,
Joined Sep 2006
889
08:25 Jun-16-2008
Re: NDT Rope Access Inspector
So, it's similar to the accoutrement I had during my army life!!! Do you need special training for this? Thanks for the enlightment,
Michel

----------- Start Original Message -----------
: Michel, just a little enlightenment to you.
: NDT Rope access inspectors are the NDT technicians who are not using any scaffoldings or any type of platforms in doing NDT works especially in ultrasonic testing. They are trained to use Rope in accessing difficult places like towers, piperacks, smokestacks, offshore structures and even the high rise buildings. It is similar to people who are doing rock climbings. In short, they are the cliffhangers with NDT qualifications.
: cheers,
: alex
:
: : Can someone enlighten me? I've been in the industry for about 20 years and yet don't know what is a NDT Rope Access Inspector.
: : Cheerios,
: : Michel
------------ End Original Message ------------




 
 Reply 
 
Joe Buckley
Consultant, ASNT L-III, Honorary Secretary of BINDT
Level X NDT, BINDT, United Kingdom, Joined Oct 1999, 528

Joe Buckley

Consultant, ASNT L-III, Honorary Secretary of BINDT
Level X NDT, BINDT,
United Kingdom,
Joined Oct 1999
528
09:33 Jun-16-2008
Re: NDT Rope Access Inspector
Check out

http://www.irata.org/training_courses.htm

Joe


----------- Start Original Message -----------
: So, it's similar to the accoutrement I had during my army life!!! Do you need special training for this? Thanks for the enlightment,
: Michel
: : Michel, just a little enlightenment to you.
: : NDT Rope access inspectors are the NDT technicians who are not using any scaffoldings or any type of platforms in doing NDT works especially in ultrasonic testing. They are trained to use Rope in accessing difficult places like towers, piperacks, smokestacks, offshore structures and even the high rise buildings. It is similar to people who are doing rock climbings. In short, they are the cliffhangers with NDT qualifications.
: : cheers,
: : alex
: :
: : : Can someone enlighten me? I've been in the industry for about 20 years and yet don't know what is a NDT Rope Access Inspector.
: : : Cheerios,
: : : Michel
------------ End Original Message ------------




 
 Reply 
 
Wolfgang
NDT Inspector, - Rotorblade Engineering
HMS Sachverständigenbüro Dr. Holstein, Germany, Joined May 2003, 2

Wolfgang

NDT Inspector, - Rotorblade Engineering
HMS Sachverständigenbüro Dr. Holstein,
Germany,
Joined May 2003
2
00:35 Jun-16-2008
Re: NDT Rope Access Inspector
----------- Start Original Message -----------
: Can someone enlighten me? I've been in the industry for about 20 years and yet don't know what is a NDT Rope Access Inspector.
: Cheerios,
: Michel
------------ End Original Message ------------

.. and do not forget the wind turbine blade inspectors using tap testing for NDT method and make defect selective imaging. It is a fast growing sector of challenging alpine type rope climbing inspections - but also problematic: sometimes brave guys climb like monkeys but do they know how to validate what they see?
Regards, Wolfgang




 
 Reply 
 
Michel Couture
NDT Inspector,
consultant, Canada, Joined Sep 2006, 889

Michel Couture

NDT Inspector,
consultant,
Canada,
Joined Sep 2006
889
01:14 Jun-19-2008
Re: NDT Rope Access Inspector
Thank you gentlemen for you input, I'll check out the reference given.

Cheerios,

Michel
----------- Start Original Message -----------
: Can someone enlighten me? I've been in the industry for about 20 years and yet don't know what is a NDT Rope Access Inspector.
: Cheerios,
: Michel
------------ End Original Message ------------




 
 Reply 
 

Product Spotlight

Sci Aps Z-Series Portable Handheld Analysers

The world’s only handheld analyzer that measures carbon content in stainless (yes even L-grades),s
...
teels, and cast irons. Also accepted for low Si analysis for sulfidic corrosion analysis, and is widely used in the power industry for Cr analysis, for flow accelerated corrosion applications.
>

FD800 Bench Top Flaw Detectors

The bench-top FD800 flaw detector range combines state-of-the-art flaw detection with advanced mater
...
ial thickness capabilities. Designed for use in the laboratory these gauges are the tool you need for all your flaw detecting needs.
>

UCI Hardness Tester NOVOTEST T-U2

UCI hardness tester NOVOTEST T-U2 is is used for non-destructive hardness testing of: metals and
...
alloys by scales of hardness: Rockwell (HRC), Brinell (HB), Vickers (HV); non-ferrous metals, alloys of iron etc., and using five additional scales for calibration; with tensile strength (Rm) scale determines the tensile strength of carbon steel pearlitic products by automatic recalculation from Brinell (HB) hardness scale.
>

NEW Wheel Type Phased Array Probe

DOPPLER NEW Wheel Type Phased Array Probe, more stable, new tyre makes lesser acoustic attenuation
...
, much lighter makes easier to handle, more slim size, magnetic and mechanical encoder optional etc...more
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window