where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

Phoenix Inspection Systems Limited
Design and manufacture ultrasonic Transducers, Scanners and Custom Solutions for NDT inspections. Innovators in NDT technology
1345 views
Career Discussions
Michel Couture
NDT Inspector,
consultant, Canada, Joined Sep 2006, 845

Michel Couture

NDT Inspector,
consultant,
Canada,
Joined Sep 2006
845
07:37 Jun-15-2008
NDT Rope Access Inspector

Can someone enlighten me? I've been in the industry for about 20 years and yet don't know what is a NDT Rope Access Inspector.

Cheerios,
Michel


    
 
 Reply 
 
alex g
alex g
05:21 Jun-16-2008
Re: NDT Rope Access Inspector
Michel, just a little enlightenment to you.
NDT Rope access inspectors are the NDT technicians who are not using any scaffoldings or any type of platforms in doing NDT works especially in ultrasonic testing. They are trained to use Rope in accessing difficult places like towers, piperacks, smokestacks, offshore structures and even the high rise buildings. It is similar to people who are doing rock climbings. In short, they are the cliffhangers with NDT qualifications.

cheers,
alex


----------- Start Original Message -----------
: Can someone enlighten me? I've been in the industry for about 20 years and yet don't know what is a NDT Rope Access Inspector.
: Cheerios,
: Michel
------------ End Original Message ------------




    
 
 Reply 
 
Michel Couture
NDT Inspector,
consultant, Canada, Joined Sep 2006, 845

Michel Couture

NDT Inspector,
consultant,
Canada,
Joined Sep 2006
845
08:25 Jun-16-2008
Re: NDT Rope Access Inspector
So, it's similar to the accoutrement I had during my army life!!! Do you need special training for this? Thanks for the enlightment,
Michel

----------- Start Original Message -----------
: Michel, just a little enlightenment to you.
: NDT Rope access inspectors are the NDT technicians who are not using any scaffoldings or any type of platforms in doing NDT works especially in ultrasonic testing. They are trained to use Rope in accessing difficult places like towers, piperacks, smokestacks, offshore structures and even the high rise buildings. It is similar to people who are doing rock climbings. In short, they are the cliffhangers with NDT qualifications.
: cheers,
: alex
:
: : Can someone enlighten me? I've been in the industry for about 20 years and yet don't know what is a NDT Rope Access Inspector.
: : Cheerios,
: : Michel
------------ End Original Message ------------




    
 
 Reply 
 
Joe Buckley
Consultant, ASNT L-III, Honorary Secretary of BINDT
Level X NDT, BINDT, United Kingdom, Joined Oct 1999, 522

Joe Buckley

Consultant, ASNT L-III, Honorary Secretary of BINDT
Level X NDT, BINDT,
United Kingdom,
Joined Oct 1999
522
09:33 Jun-16-2008
Re: NDT Rope Access Inspector
Check out

http://www.irata.org/training_courses.htm

Joe


----------- Start Original Message -----------
: So, it's similar to the accoutrement I had during my army life!!! Do you need special training for this? Thanks for the enlightment,
: Michel
: : Michel, just a little enlightenment to you.
: : NDT Rope access inspectors are the NDT technicians who are not using any scaffoldings or any type of platforms in doing NDT works especially in ultrasonic testing. They are trained to use Rope in accessing difficult places like towers, piperacks, smokestacks, offshore structures and even the high rise buildings. It is similar to people who are doing rock climbings. In short, they are the cliffhangers with NDT qualifications.
: : cheers,
: : alex
: :
: : : Can someone enlighten me? I've been in the industry for about 20 years and yet don't know what is a NDT Rope Access Inspector.
: : : Cheerios,
: : : Michel
------------ End Original Message ------------




    
 
 Reply 
 
Wolfgang
NDT Inspector, - Rotorblade Engineering
HMS Sachverständigenbüro Dr. Holstein, Germany, Joined May 2003, 2

Wolfgang

NDT Inspector, - Rotorblade Engineering
HMS Sachverständigenbüro Dr. Holstein,
Germany,
Joined May 2003
2
00:35 Jun-16-2008
Re: NDT Rope Access Inspector
----------- Start Original Message -----------
: Can someone enlighten me? I've been in the industry for about 20 years and yet don't know what is a NDT Rope Access Inspector.
: Cheerios,
: Michel
------------ End Original Message ------------

.. and do not forget the wind turbine blade inspectors using tap testing for NDT method and make defect selective imaging. It is a fast growing sector of challenging alpine type rope climbing inspections - but also problematic: sometimes brave guys climb like monkeys but do they know how to validate what they see?
Regards, Wolfgang




    
 
 Reply 
 
Michel Couture
NDT Inspector,
consultant, Canada, Joined Sep 2006, 845

Michel Couture

NDT Inspector,
consultant,
Canada,
Joined Sep 2006
845
01:14 Jun-19-2008
Re: NDT Rope Access Inspector
Thank you gentlemen for you input, I'll check out the reference given.

Cheerios,

Michel
----------- Start Original Message -----------
: Can someone enlighten me? I've been in the industry for about 20 years and yet don't know what is a NDT Rope Access Inspector.
: Cheerios,
: Michel
------------ End Original Message ------------




    
 
 Reply 
 

Product Spotlight

NDT.net launches mobile-friendly design

NDT.net has revamped its website providing a mobile-friendly design.The front page received a comp
...
letely new design and all other sections are now reacting responsively on mobile devices. This has been a major step to make our website more user- friendly.
>

SITEX CPSERIES

Teledyne ICM’s CPSERIES has been designed with a view to revolutionizing the handling and perfor
...
mances of portable X-Ray sets. Despite having managed to halve the weight of similar portable X-Ray generators available on the market (while continuing to provide the same power output), the SITEX CPSERIES generators feature a shutter, a laser pointer, a beryllium window, an aluminum filter and two integrated diaphragms (customized sizes are available upon request). Without compromising the robustness and reliability for which ICM products are renowned, the small size and light weight of the SITEX CPSERIES will radically change the way that you perform your RT inspections. And you will see a positive impact in terms of both quality and return on investment (ROI).
>

NEW - TD Focus-ScanRX

The NEW Next Generation Advanced UT platform, TD Focus ScanRX - Also available as a card stack solut
...
ion. Key Improvements 1. Data acquisition is significantly faster than current design 2. Better aesthetic – closely aligns with HandyScan RX 3. Improved IP rating (Target IP66) 4. Ruggedized housing 5. Connectors are protected from impact and ingress 6. Integrated stand and separate retractable handle easy to keep clean) 7. Touchscreen with ruggedized display glass 8. 3-Axis encoder input
>

NDTkit RT

NDTkit RT, TESTIA's Digital Radiography software The NDTkit product line software for X-ray analysi
...
s. NDTkit RT is a software benefiting from the Ultis kernel which is dedicated to radiographic image analysis. It offers a set of tools and filtering processes to assist RT operators in finding relevant flaws.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window