where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

590 views
Career Discussions
jacca
NDT Inspector
Algeria, Joined Jun 2008, 4

jacca

NDT Inspector
Algeria,
Joined Jun 2008
4
03:22 Jun-24-2008
career in ndt

hi
I'm thinking of starting a new career in NDT. Thinking of doing course in megnetic and ultrasonics and rope access. These will be level 1 of course and i need to know what are my chances of getting a job after completing these and likely income?

If i persue this career i will try for level 2. Again are there many jobs all seem to be for couple of week here and there.

Any advice appreciated.


 
 Reply 
 
Michel Couture
NDT Inspector,
consultant, Canada, Joined Sep 2006, 897

Michel Couture

NDT Inspector,
consultant,
Canada,
Joined Sep 2006
897
08:04 Jun-25-2008
Re: career in ndt
Well James,

I don't know how things are in Algeria, but I'll try to give you a little insight. For one thing, NDT in a large part is a trade that service various industries. We basically work when they need us, which is during their down time. In Ontario, Canada, the Nuclear facilities uses lots of technicians from various service companies. Of course, most of the inspections will be done in the spring and in the fall, because the demand for electricity is at its lowest (no heating or air conditioning). As a result, techicians work on an average 60 hours a week. The same thing goes on for the shut downs in the Pulp and paper industry. Yet outside of those periods, the work may be slow. For other parts of Canada, conditions are different. In the Western provinces, they are involved in the oil industry. I've been told that technicians over there are working about 12 - 14 hours a day, 7 days a week. In the winter, time may be slow for them.

The best advice I can give you is to be flexible with your work schedule, because it often change in a heart beat and be willing to travel. Also, learn to live on a 40 hours pay cheque even though you're working 60. Save the rest for a rainy day.

Good Luck to you,

Michel
----------- Start Original Message -----------
: hi
: I'm thinking of starting a new career in NDT. Thinking of doing course in megnetic and ultrasonics and rope access. These will be level 1 of course and i need to know what are my chances of getting a job after completing these and likely income?
: If i persue this career i will try for level 2. Again are there many jobs all seem to be for couple of week here and there.
: Any advice appreciated.
------------ End Original Message ------------




 
 Reply 
 

Product Spotlight

Cygnus 6+ PRO Multi-Mode Ultrasonic Thickness Gauge

The Cygnus 6+ PRO thickness gauge is the most advance gauge within the Cygnus range with key featu
...
res including: comprehensive data logging; A-scan and B-scan display; manual gain control; Bluetooth connectivity; and much more. With its unique dual display and three measuring modes (Multiple-Echo, Echo-Echo and Single-Echo), this surface thickness gauge offers maximum versatility for inspections.
>

Ultrasonic Testing Immersion Tanks with Unmatched Scanning Features

TecScan’s non-destructive testing Ultrasonic Immersion Tanks & scanners are designed for high pe
...
rformance and demanding NDT testing applications. Our Scan3D™ line of High Precision Immersion Tanks are specifically designed for automated ultrasonic testing of complex composites parts used in aerospace and industrial applications.
>

On Demand Webinar: Improve the Efficiency and Accuracy of Inspection Scanning

On-demand webinar on scanning technology that helps improve the efficiency and accuracy of ultrasoni
...
c inspections in oil and gas, aerospace, manufacturing and other industrial applications. The webinar features a scanning solution for multiple inspection environments, including flat and curved specimens, magnetic and nonmagnetic surfaces and raster scanning over long distances. View it today.
>

High-performance Linear Phased Array Probes

Available to order from stock in a range of 5MHz – 7.5MHz and from 16 to 64 elements. Designed w
...
ith piezo-composite elements, Phoenix phased array probes provide high-resolution imaging to maximise sensitivity; accurate ultrasonic detection and sizing of defects in welds; and effective corrosion mapping. Housed in a rugged stainless steel case for on-site industrial NDT applications.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window