where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

Airstar Inc.
Application of the newest technologies, such as air-coupled ultrasound, digital instrumentation, signal processing, and transducer technology.
1343 views
Career Discussions
mj
mj
01:11 Sep-13-2008
MFL/EMFL Equipment 4 pipline inspection

Hello friends, Iam looking one MFL Equipment for inspection 4" and 6" flowline to find corrosion and pittings from outside the pipe( not a pigging tool) if some one know about these kind of Equipment please let me know. I know about Silverwing and NewTech Equipments. i need some other manufacture
cheers
MJ


    
 
 Reply 
 
Jim Yukes
Jim Yukes
08:13 Sep-14-2008
Re: MFL/EMFL Equipment 4 pipline inspection
Pan American Industries makes a UT tool for pipeline inspection that might be useful.
----------- Start Original Message -----------
: Hello friends, Iam looking one MFL Equipment for inspection 4" and 6" flowline to find corrosion and pittings from outside the pipe( not a pigging tool) if some one know about these kind of Equipment please let me know. I know about Silverwing and NewTech Equipments. i need some other manufacture
: cheers
: MJ
------------ End Original Message ------------




    
 
 Reply 
 
Rafal Mis
Sales, - Technical Support
Olympus Poland, Poland, Joined Sep 2008, 11

Rafal Mis

Sales, - Technical Support
Olympus Poland,
Poland,
Joined Sep 2008
11
02:02 Sep-15-2008
Re: MFL/EMFL Equipment 4 pipline inspection
----------- Start Original Message -----------
: Hello friends, Iam looking one MFL Equipment for inspection 4" and 6" flowline to find corrosion and pittings from outside the pipe( not a pigging tool) if some one know about these kind of Equipment please let me know. I know about Silverwing and NewTech Equipments. i need some other manufacture
: cheers
: MJ
------------ End Original Message ------------

ULTRA from Poland is making UT equipment for pipes testing. This equipment allows thin pipes testing 2-8 mm. If you need some further informations, let me know.
Regards,
Rafal Mis


    
 
 Reply 
 
Ron Alers
Director, - - President of EMAT Ultrasonics Inc.
USA, Joined Feb 2007, 4

Ron Alers

Director, - - President of EMAT Ultrasonics Inc.
USA,
Joined Feb 2007
4
00:38 Sep-15-2008
Re: MFL/EMFL Equipment 4 pipline inspection
Dear MJ,
There is another technique using EMAT circumferential guided waves which ultrasonically inspect the full body of the pipe as you scan down the length of he pipe. This technique only requires access to one side of the pipe so it does not need complete exposure and is highly effective screening tool for pitting, MIC, or general corrosion. This in our CIRC tool and there are many Inspection Service Providers or you could acquire the tools and training to do it your self. You can get more information at: www.sonicsensors.com or contact me directly, the developer, and manufacturer. Cordially,
Ron Alers
----------- Start Original Message -----------
: Hello friends, Iam looking one MFL Equipment for inspection 4" and 6" flowline to find corrosion and pittings from outside the pipe( not a pigging tool) if some one know about these kind of Equipment please let me know. I know about Silverwing and NewTech Equipments. i need some other manufacture
: cheers
: MJ
------------ End Original Message ------------




    
 
 Reply 
 
Larry Hopper
Larry Hopper
02:23 Sep-17-2008
Re: MFL/EMFL Equipment 4 pipline inspection
----------- Start Original Message -----------
: Hello friends, Iam looking one MFL Equipment for inspection 4" and 6" flowline to find corrosion and pittings from outside the pipe( not a pigging tool) if some one know about these kind of Equipment please let me know. I know about Silverwing and NewTech Equipments. i need some other manufacture
: cheers
: MJ
------------ End Original Message ------------
There are a number of things available for scanning pipe from the OD. One you should investigate is the TesTex PS2000. This is a very effective method for scanning from the OD. If you contact me, I wills end you information about pipe scanning and experiences with past uses.



    
 
 Reply 
 

Product Spotlight

High-performance Linear Phased Array Probes

Available to order from stock in a range of 5MHz – 7.5MHz and from 16 to 64 elements. Designed w
...
ith piezo-composite elements, Phoenix phased array probes provide high-resolution imaging to maximise sensitivity; accurate ultrasonic detection and sizing of defects in welds; and effective corrosion mapping. Housed in a rugged stainless steel case for on-site industrial NDT applications.
>

NOVO Armor 15 & NOVO Armor 22

The Armor Kit Contains the NOVO Armor, which provides additional mechanical protection to the NOVO 1
...
5WN & NOVO 22WN Detectors, the Armor Stand and a traveling soft cover. - Newest shock absorbent technology case - Water resistant design - Supports wired & wireless communication - Multiple positioning options - Tripod connection using the Built-in 1/4” threads - Simple Detector battery replacement
>

GEKKO - Portable Phased Array Testing with TFM in Real-Time

The portable phased array testing system GEKKO provides 64 parallel test channels. On creating testi
...
ng parameters the operator is assisted by the CIVA software. Due to its modular set-up the GEKKO instrument is suitable for operators of all skill levels.
>

AMIGO2

TSC Amigo2 - ACFM technology has developed a solid reputation for accurately detecting and sizing
...
surface-breaking cracks through paint and coatings. As the industry demands increased performance in speed, signal quality, and portability, it’s time for an evolution. It’s time for Amigo2.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window